Abstract:The interfacial behaviors and mechanism of ZrC–SiC and Ti system under pulsed electric current were systematically analyzed in this study. The results showed that the dominant products of Ti and ZrC–SiC composite interface were TiC x and Ti 3 Zr 3 Si 3 . The former was originated from the interaction of Ti and interfacial ZrC, while the latter resulted from the grain-boundary diffusion of inner Si and Zr atoms towards Ti interlayer. Meanwhile, the reaction of Ti and interfacial SiC produced TiC x and Ti 5 Si 3 C, and Ti 5 Si 3 C would transform into Ti 5 Si 3 and TiC x in the Ti-enriched environment. More interestingly, pulsed current could significantly promote the interfacial reactions, the combination of experimental analysis and theoretical calculation indicated that the current-related mechanisms involved (i) quick grain-boundary diffusion of Zr and Si benefited from the local joule-heating, (ii) strengthened volume diffusion of C element by the increasing lattice defects and (iii) additional diffusion flux towards Ti interlayer induced by the temperature gradient in micro-scale. Additionally, the coupled influence of skin effect and electromigration were studied, the results revealed the skin effect caused a local high current density at the sample edge, which triggered the directional movement of carbon vacancies thus the preferential growth of TiC x phase in the anode, but the microstructure was homogenous in the majority area due to the exponential distribution of current.

Rapidly Achieving a Reliable Full-Ceramic Interface of ZrC-SiC Composite Using Ti Interlayer Via Pulsed Electric Current Joining

Interfacial behaviors and mechanism of ZrC-SiC composite and Ti system under pulsed electric current

Joining SiC ceramics with ZrSi2–SiC filler at low temperatures

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Low temperature seamless joining of SiC using a Ytterbium film

Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering

SiC Ceramics Joined with an In-Situ Reaction Gradient Layer of TiC/Ti3SiC2 and Interface Stress Distribution Simulations

Ultrafast low-temperature near-seamless joining of Cf/SiC using a sacrificial Pr3Si2C2 filler via electric current field-assisted sintering technique

Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Ultrafast and robust joining of 3YSZ and GH3128 superalloy using Cu interlayer under an electric field

Joining of Ti-coated monolithic SiC using a SiCw/Ti3SiC2 filler by electric field-assisted sintering

Joining silicon nitride ceramics with ZrSi2-SiC composite filler by spark plasma sintering

An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

A novel optimized two-step method for preparing the Z-pin-like rods to improve their effect on the ablation resistance of C/C-ZrC-SiC

SiC fiber strengthened Si 14Ti high-temperature filler alloy for brazing SiC f /SiC and C/C composites

Microstructures and mechanical property of ZrC joints diffusion bonded using Ti/Ta/Ti as the interlayer

Wetting and brazing of Cf/C composites with Si–Zr eutectic alloys: The formation of nano- and coarse-SiC reaction layers

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites