Abstract:LaMnO3-delta (LMO) films with different oxygen contents are deposited on Epi-MgO/IBAD-MgO templates using reactive magnetron sputtering under varying temperatures and atmospheres. Subsequent YBa2Cu3O7-delta (YBCO) films are grown on LMO layers by metal-organic deposition (MOD) method. X-ray diffraction measurements reveal that YBCO texture cannot be further improved when the full width at half maximum (FWHM) values of LMO (011) phi-scans (evaluation on in-plane alignment) and LMO (002) omega-scans (evaluation on out-of-plane alignment) for LMO films are less than 8 degrees and 4 degrees, respectively. Sharp orientation with in-plane FWHM value of <3 degrees for YBCO (103) phi-scan and out-of-plane FWHM value of <1.5 degrees for YBCO (006) omega-scan can typically be achieved in YBCO films. Precise control of growth conditions, especially atmosphere, remains a feasible way to modify the surface of LMO films. It induces changes in oxygen content, lattice structure and surface morphology of LMO, and further affects the epitaxial growth of superconducting layers. Oxygen-deficient LMO with expanded lattice parameters and flat surface can effectively suppress the non-c-axis oriented YBCO, thereby enhancing the current carrying capability. The 500 m long YBCO coated conductors with conditioned LMO layers have an inductive critical current (I-c) ranging from 358 to 437 A/12 mm width with an average value of 398 A/12 mm width.

Improved Superconducting Performance of YBCO-Coated Conductors by Low Energy Density Argon Ion Etching

Improvement of Surface Morphology and Superconducting Properties of YBCO Coated Conductor on Ni-W Tapes

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Ion Beam Structure Modification of YBa2Cu3O7−x Coated Conductors Prepared by Solution Techniques

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Low-Vacuum Pyrolysis of YBCO Films by Using Fluorine-Free Metal Organic Chemical Deposition

Fluorine-free sol gel deposition of epitaxial YBCO thin films for coated conductors

AG DOPING EFFECTS OF YBCO BY LOW FLUORINE MOD METHOD

Surface characterization of as-grown CeO2 cap layer morphology evolution and critical current density of post-deposited YBCO films

YBCO Thin Films Prepared by Fluorine-Reduced Metal–organic Deposition Using Trifluoroacetates

Improvement of Bi-Layered YBCO Superconducting Films by Using Ag and Au Interlayers

The Influence of Surface Morphology of Buffer Layer on the Critical Current Density in YBCO Coated Conductors

Influence of Partial Melting Temperature on Structure and Superconducting Properties of YBCO Film by Non-fluorine MOD

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Crucial role of oxygen-deficient LaMnO3-delta cap buffer layer in enhancement of current carrying capability of MOD-YBCO coated conductors

Progress towards a low-cost commercial coated conductor

Property Improvement of 600-Nm-thick YBCO Superconducting Films Fabricated Using a Pb-Modified MOD Method

Artificial Control for Nucleation and Growth Rate of YBa2Cu3O7-δ Coated Conductors Prepared by Low Fluorine Chemical Solution Deposition

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors