Abstract:High-voltage medium-nickel low-cobalt lithium layered oxide cathode materials are becoming a popular development route for high-energy lithium-ion batteries due to their relatively high capacity, low cost, and improved safety. Unfortunately, capacity fading derived from surface lithium residue, electrode-electrolyte interfacial side reactions, and bulk structure degradation severely limits large-scale commercial utilization. In this work, an ultrathin and uniform NASICON-type Li3V2(PO4)3 (LVP) nanoscale functional coating is formed in situ by utilizing residual lithium to enhance the lithium storage performance of LiNi0.6Co0.05Mn0.35O2 (NCM) cathode. The GITT and ex-situ EIS and XPS demonstrate exceptional Li+ diffusion and conductivity and attenuated interfacial side reactions, improving the electrode-electrolyte interface stability. The variable temperature in-situ XRD demonstrates delayed phase transition temperature to improve thermal stability. The battery in-situ XRD displays the single-phase H1–H2 reaction and weakened harmful H3 phase transition, minimizing the bulk mechanical degradation. These improvements are attributed to the removal of surface residual lithium and the formation of NASICON-type Li3V2(PO4)3 functional coatings with stable structure and high ionic and electronic conductivity. Consequently, the obtained NCM@LVP delivers a higher capacity retention rate (97.1% vs. 79.6%) after 150 cycles and a superior rate capacity (87 mAh·g−1 vs. 58 mAh·g−1) at a 5 C current density than the pristine NCM under a high cut-off voltage of 4.5 V. This work suggests a clever way to utilize residual lithium to form functional coatings in situ to improve the lithium storage performance of high-voltage medium-nickel low-cobalt cathode materials.

Enhanced Microstructure Stability of LiNi0.8Co0.1Mn0.1O2 Cathode with Negative Thermal Expansion Shell for Long-Life Battery

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Enhanced lithium storage capability of Ni-rich LiNi0.9CoxMn0.1−xO2(0 ≤ x ≤ 0.1) cathode by co-operation of Al-doping and V-coating

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Thermal Expansion Neutralization Enhancing the Cycling Stability of Ni-Rich LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Functional Passivation Interface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 toward Superior Lithium Storage

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Binary-compositional core-shell structure Ni-rich cathode material with radially oriented primary particles in shell for long cycling lifespan lithium-ion batteries

Residual Alkali-Evoked Cross-Linked Polymer Layer for Anti-Air-sensitivity LiNi0.89Co0.06Mn0.05O2 Cathode

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

Dual modified NCMA cathode with enhanced interface stability enabled high-performance sulfide-based all-solid-state lithium battery

Stabilization of high-voltage layered oxide cathode by utilizing residual lithium to form NASICON-type nanoscale functional coating

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Dual-modified engineering suppressed the formation of Li-concentration gradient and oxygen vacancies for single-crystal Ni-rich layered cathodes