Abstract:Synergistic external and internal effects of ZTO coating and Zr doping not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration in the secondary spherical particles, but also anchors the lattice O to stabilize crystal structure for ensuring the smooth transportation of Li‐ion, thus preventing the nucleation of intragranular fractures and following cracking formation. Intergranular cracking of Ni‐rich layered LiNi1‐x‐yCoxMnyO2 (1‐x‐y ≥ 0.8) cathode particles deteriorate the chemo–electro–mechanical stability of high‐energy lithium‐ion batteries (LIBs), thus presenting a challenge to typical modification methods to establish robust structures with highly efficient lithium‐ion storage. Herein, the ZrTiO4 (ZTO) as an epitaxial layer to enhance mechanical stability of ultrahigh‐Ni LiNi0.9Co0.05Mn0.05O2 (NCM90) is reported for the first time. Intensive exploration from structure characterizations (X‐ray absorption spectroscopy and in situ X‐ray diffraction techniques), multi‐physics field analysis, and first‐principles calculations disclose that the conformal ZTO layers and Zr doping effectively suppresses the internal strain and the release of lattice oxygen, which prodigiously restrains the local stress accumulation during whole (de)lithiation processes, thereby maintaining good mechanical stability of the materials. Meanwhile, the protective ZTO layer also prevents electrolyte erosion, thus keeping an intact surface structure of NCM90. Notably, ZTO‐modified NCM90 achieves significantly improved cyclability under high‐voltage (4.5 V) operation, expressing a 17% increase in capacity retention (71% vs 88%) after 100 cycles. Overall, this work reveals the role of internal strain in the original degradation behavior and effectiveness of surface engineering strategy to solve the challenge, emphasizing that the conformal surface protection mitigates the internal stress of Ni‐rich NCM by anchoring the lattice oxygen.

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Improved thermal and structural stabilities of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode by La 2 Zr 2 O 7 multifunctional modification

Thermal Expansion Neutralization Enhancing the Cycling Stability of Ni-Rich LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

Enhancing high-voltage structural stability of single-crystalline Ni-rich LiNi0.9Mn0.05Co0.05O2 cathode material by ultrathin Li-rich oxide layer for lithium-ion batteries

Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Suppressing interfacial structure failure of Ni-rich cathode materials under high work voltage towards improved cycling stability enabled via Li2MnO3-based surface construction

Enabling Superior Cycling Stability of LiNi0.9Co0.05Mn0.05O2 with Controllable Internal Strain

A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material

Effect of Nb2O5 Nanocoating on the Thermal Stability and Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 Cathode Materials for Lithium Ion Batteries

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Enhancing surface stability of LiNi0.8Co0.1Mn0.1O2 cathode with hybrid core-shell nanostructure induced by high-valent titanium ions for Li-ion batteries at high cut-off voltage

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Enhancing cyclic and in-air stability of Ni-Rich cathodes through perovskite oxide surface coating