Abstract:The application of Ni‐rich cathode materials is obstructed by interfacial and structural instability. This work proposes a facile and cost‐effective Al‐based vapor‐phase surface reaction strategy on Ni‐rich cathode to maintain its structural integrity from near‐surface to bulk. This strategy unlocks the possibilities of achieving outstanding performance for Ni‐rich cathode without significantly increasing manufacturing cost. A significant obstacle in the manufacturing and practical application of Ni‐rich cathode materials is decreasing the manufacturing cost without sacrificing the cycling stability. Here a high‐energy, ultrahigh‐Ni, and nearly Co‐free cathode with outstanding cycling performance is proposed. This promising cathode is enabled by artificially constructing an "outside‐in" interface structure toward LiNi0.94Co0.05Mn0.01O2 (NCM94) cathodes. Combining theoretical prediction and experimental results, it is revealed that high interfacial stability is achieved by a specific surface chemistry with an outside‐in structure composed of an inner organic layer and an outer inorganic layer. Benefiting from the protection effect of the robust outside layer and the strain relieve function of the inside layer, the intrinsic challenges of interfacial reactions, transition metal (TM) dissolution, and micro‐crack propagation have been mitigated for the Ni‐rich cathode. As a result, the "outside‐in" strategy enables superior cycling stability with a 92.7% retention after 200 cycles and an excellent rate capability of 149.1 mAh g−1 at 10 C, achieved by adding only 0.5% of the production cost. This study unlocks the possibilities of achieving outstanding performance for ultrahigh Ni cathode by spending minimum cost through the facile surface chemistry method.

Suppressing interfacial structure failure of Ni-rich cathode materials under high work voltage towards improved cycling stability enabled via Li2MnO3-based surface construction

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

Surface Reconstruction of High-Voltage LiNi0.5Mn1.5O4 Cathode via the Sculpture Method toward Enhanced Stability

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Improved Cycling Stability of Ni-Rich Cathode Material by In Situ Introduced TM-B-O Amorphous Surface Structure

Enhanced lithium storage capability of Ni-rich LiNi0.9CoxMn0.1−xO2(0 ≤ x ≤ 0.1) cathode by co-operation of Al-doping and V-coating

Improving the Cycling Performance of the Layered Ni-Rich Oxide Cathode by Introducing Low-Content Li2mno3

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Lithium-conductive LiNbO3 Coated High-Voltage LiNi0.5Co0.2Mn0.3O2 Cathode with Enhanced Rate and Cyclability

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Highly Stabilized Ni‐Rich Cathodes Enabled by Artificially Reversing Naturally‐Formed Interface

Enhancing high-voltage structural stability of single-crystalline Ni-rich LiNi0.9Mn0.05Co0.05O2 cathode material by ultrathin Li-rich oxide layer for lithium-ion batteries

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Improved Rate Capability and Cycle Stability of Li[Ni 0.5 Co 0.2 Mn 0.3 ]O 2 with Li 2 MnO 3 Coating under High Cut-off Voltage

Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes