Abstract:By optimizing the electronic structure, Li/Cu co‐substitution effectively activates more Ni2+ and Fe3+ ions to participate in charge compensation above 2.5 V, while suppressing the redox activity of Mn3+ below 2.5 V. This strategy effectively mitigates the Jahn‐Teller distortion of Mn3+ and inhibits the irreversible O3–P3 phase transition, realizing long‐term cycle life for the O3‐type layered oxide cathode. O3‐type layered oxide cathode exhibits great application potential for practical sodium‐ion batteries, due to its cost‐effectiveness, abundant sodium and manganese resources, and high theoretical capacity. However, the irreversible phase transition, coupled with rapid capacity decay, which is primarily attributed to the Jahn‐Teller effect of Mn3+, remains a significant bottleneck for commercial application. Additionally, the sluggish kinetics during the (de)sodiation process require urgent improvement. Herein, an electronic structure regulation strategy is proposed by low‐valence Li/Cu co‐substitution to address these issues. The roles of Li/Cu on the electronic structure, structural evolution, and electrochemical properties in the Na0.96Ni0.22Fe0.2Mn0.5Li0.04Cu0.04O2 (NFMLC) cathode are comprehensively explored through systematic in situ/ex situ characterization techniques and theoretical calculations. The results reveal that this strategy effectively activates more Ni2+/3+ and Fe3+/4+ redox reactions above 2.5 V, while suppressing Mn3+/4+ redox activity below 2.5 V, thereby achieving highly structural reversibility. Therefore, the NFMLC electrode displays excellent long‐term cycling stability (81.5% capacity retention after 2000 cycles at 5 C), and significantly enhanced rate performance (from 45.5% to 80.4% under a ratio of 5 C to 0.5 C). This work provides a valuable perspective on the design of low‐cost, long‐life, and high‐performance layered oxide cathodes for practical sodium‐ion batteries.

Improving the Cycling Performance of the Layered Ni-Rich Oxide Cathode by Introducing Low-Content Li2mno3

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Enhancement on the Cycling Stability of the Layered Ni-Rich Oxide Cathode by In-Situ Fabricating Nano-Thickness Cation-Mixing Layers

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Improvement of the cyclic deterioration and structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 cathode material by controlling initial charging voltages

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating

A Novel Strategy to Suppress Capacity and Voltage Fading of Li‐ and Mn‐Rich Layered Oxide Cathode Material for Lithium‐Ion Batteries

Improving the Reversibility of the H2-H3 Phase Transitions for Layered Ni-rich Oxide Cathode Towards Retarded Structural Transition and Enhanced Cycle Stability

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

In-situ construction protective layer and phosphate doping synergistically improve the long-term cycle stability of LiNi0.6Co0.1Mn0.3O2

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Improving the stability of P2-type NaMn2/3Ni1/3O2 via phasic intergrowth induced by Li-ion substitution

Suppressing the Voltage Decay of Li1.2Mn0.6Ni0.2O2 Cathode Materials Enabled by LiMn0.8Fe0.2PO4/C for Long-Cycling Lithium-Ion Batteries

Enabling Long‐Term Cycling Stability Within Layered Li‐Rich Cathode Materials by O2/O3‐Type Biphasic Design Strategy

Enhancement on Structural Stability of Ni-rich Cathode Materials by In-Situ Fabricating Dual-Modified Layer for Lithium-Ion Batteries

Tuning Electrochemical Properties of Li-Rich Layered Oxide Cathodes by Adjusting Co/Ni Ratios and Mechanism Investigation Using in Situ X-ray Diffraction and Online Continuous Flow Differential Electrochemical Mass Spectrometry

Improvement of stability and capacity of Co-free, Li-rich layered oxide Li1.2Ni0.2Mn0.6O2 cathode material through defect control

Boosting the Structural Reversibility of Layered Oxide Cathode for Realizing Long‐Term Cycle Life Through Electronic Structure Regulation

Regulating Surface and Grain-Boundary Structures of Ni-Rich Layered Cathodes for Ultrahigh Cycle Stability

Long-Term Cycle Stability Enabled by the Incorporation of Ni into Li2MnO3 Phase in the Mn-Based Li-Rich Layered Materials