Abstract:As a common commercial lithium ion battery cathode material, the development of layered LiNi0.5Co0.2Mn0.3O2 (NCM) is restricted by the relatively unsatisfied energy density, which can be improved by elevating the operating potential range (> 4.3 V). However, the conventional secondary particles of LiNi0.5Co0.2Mn0.3O2 (CNCM) with abundant grain boundaries will suffer from the anisotropic expansion coupled with severe electrode/electrolyte interface parasitic reactions under the high-voltage and elevated-temperature conditions, inevitably resulting in the structural collapse with intergranular cracks and long-term cycling degradation. Herein, the quasi single-crystalline LiNi0.5Co0.2Mn0.3O2 (SC-NCM) with primary particles of 3-6 mu m diameter is developed, which exhibits superior cycling performance as well as significantly improved structural integrity, even at elevated-temperature (45 degrees C) and high-voltage (4.6 V). Remarkably, the SC-NCM parallel to graphite pouch-type full cell maintains 98.7% of its initial capacity at harsh conditions of 45 degrees C and charged voltage of 4.4 V after 500 cycles with only 0.0026% decay per cycle. More importantly, the fundamental understandings of the quasi single-crystalline architecture on structure stability and phase transformation are clearly unraveled. The results reveal that the SC-NCM primary particles with micron-sizes morphology can effectively prevent the generation of intergranular cracks, thereby alleviating the irreversible structural degradation. Meanwhile, the undesired side interactions are mitigated by the reduced electrode/electrolyte interfaces, thus alleviating the irreversible phase transformation. This work provides an insight into the strategy of developing single-crystalline micron-sized particles, which can maintain the structural stability and improve cycling life of NCM cathodes, even under the harsh operating condition of elevated-temperature and high-voltage.

Thermal Expansion Neutralization Enhancing the Cycling Stability of Ni-Rich LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Improved Cycling Stability of LiNi0.6Co0.2Mn0.2O2 Through Microstructure Consolidation by TiO2 Coating for Li-ion Batteries

Enabling Excellent Thermal Stability of an Ultrahigh Nickel-Rich Cathode (lini0.90co0.05mn0.05o2) by a Magnesium and Titanium Codoping Strategy

Enhanced Microstructure Stability of LiNi0.8Co0.1Mn0.1O2 Cathode with Negative Thermal Expansion Shell for Long-Life Battery

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Structure and Charge Regulation Strategy Enabling Superior Cycling Stability of Ni-Rich Cathode Materials.

Enhancement on Structural Stability of Ni-rich Cathode Materials by In-Situ Fabricating Dual-Modified Layer for Lithium-Ion Batteries

Modification of LiNi0.8Co0.1Mn0.1O2 Cathode Materials from the Perspective of Chemical Stabilization and Kinetic Hindrance

Achieving Thermodynamic Stability of Single‐Crystal Co‐Free Ni‐Rich Cathode Material for High Voltage Lithium‐Ion Batteries

Improved thermal and structural stabilities of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode by La 2 Zr 2 O 7 multifunctional modification

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Unravelling the Influence of Quasi Single-Crystalline Architecture on High-Voltage and Thermal Stability of LiNi0.5Co0.2Mn0.3O2 Cathode for Lithium-Ion Batteries

Synergistic Effect of Microstructure Engineering and Local Crystal Structure Tuning to Improve the Cycling Stability of Ni-Rich Cathodes

Unveiling thermal decomposition kinetics of Single-Crystalline Ni-Rich LiNi0.88Co0.07Mn0.05O2 cathode for safe Lithium-Ion batteries

Improved Thermal and Structural Stabilities of LiNi0.6Co0.2Mn0.2O2 Cathode by La2Zr2O7 Multifunctional Modification

Substantial Doping Engineering in Layered LiNi0.5+xCo0.2−xMn0.3O2 Materials for Lithium-Ion Batteries

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Mitigating the Surface Reconstruction of Ni-Rich Cathode <i>via</i> P2-Type Mn-Rich Oxide Coating for Durable Lithium Ion Batteries

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping