Abstract:As a common commercial lithium ion battery cathode material, the development of layered LiNi0.5Co0.2Mn0.3O2 (NCM) is restricted by the relatively unsatisfied energy density, which can be improved by elevating the operating potential range (> 4.3 V). However, the conventional secondary particles of LiNi0.5Co0.2Mn0.3O2 (CNCM) with abundant grain boundaries will suffer from the anisotropic expansion coupled with severe electrode/electrolyte interface parasitic reactions under the high-voltage and elevated-temperature conditions, inevitably resulting in the structural collapse with intergranular cracks and long-term cycling degradation. Herein, the quasi single-crystalline LiNi0.5Co0.2Mn0.3O2 (SC-NCM) with primary particles of 3-6 mu m diameter is developed, which exhibits superior cycling performance as well as significantly improved structural integrity, even at elevated-temperature (45 degrees C) and high-voltage (4.6 V). Remarkably, the SC-NCM parallel to graphite pouch-type full cell maintains 98.7% of its initial capacity at harsh conditions of 45 degrees C and charged voltage of 4.4 V after 500 cycles with only 0.0026% decay per cycle. More importantly, the fundamental understandings of the quasi single-crystalline architecture on structure stability and phase transformation are clearly unraveled. The results reveal that the SC-NCM primary particles with micron-sizes morphology can effectively prevent the generation of intergranular cracks, thereby alleviating the irreversible structural degradation. Meanwhile, the undesired side interactions are mitigated by the reduced electrode/electrolyte interfaces, thus alleviating the irreversible phase transformation. This work provides an insight into the strategy of developing single-crystalline micron-sized particles, which can maintain the structural stability and improve cycling life of NCM cathodes, even under the harsh operating condition of elevated-temperature and high-voltage.

Unveiling thermal decomposition kinetics of Single-Crystalline Ni-Rich LiNi0.88Co0.07Mn0.05O2 cathode for safe Lithium-Ion batteries

Unveiling the Thermal Decomposition Mechanism of High-Nickel Cathode with Loaded Nano-Al2o3 on Conductive Carbon for Safe Lithium-Ion Batteries

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

Probing the thermal degradation mechanism of polycrystalline and single-crystal Li(Ni0.8Co0.1Mn0.1)O2 cathodes from the perspective of oxygen vacancy diffusion

Thermal Kinetics Comparison of Delithiated Li[Ni Co Mn ]O2 Cathodes

Revealing the origin of high-thermal-stability of single-crystal Ni-rich cathodes toward higher-safety batteries

Experimental Study on Pyrolysis Kinetics and Thermal Stability of Li (Ni<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>)O<sub>2</sub> Cathode Material at Different State of Charge

The Role of Cobalt and Manganese for the Safety of Ni-Rich NMC Cathode

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by Means of Operando Gas Analysis and Neutron Diffraction

In-situ Probing the Near-Surface Structural Thermal Stability of High-Nickel Layered Cathode Materials

Experimental Study on Pyrolysis Kinetics and Thermal Stability of Li (ni1/3co1/3mn1/3)o2 Cathode Material at Different State of Charge

Thermally Driven Mesoscale Chemomechanical Interplay in Li0.5Ni0.6Mn0.2Co0.2O2 Cathode Materials

Single-Crystalline Particles: an Effective Way to Ameliorate the Intragranular Cracking, Thermal Stability, and Capacity Fading of the LiNi0.6Co0.2Mn0.2O2 Electrodes

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Unravelling the Influence of Quasi Single-Crystalline Architecture on High-Voltage and Thermal Stability of LiNi0.5Co0.2Mn0.3O2 Cathode for Lithium-Ion Batteries

Insight into Thermal Analysis Kinetics of Surface Protected LiNi0.8Co0.15Al0.05O2 Cathode for Safe Lithium-Ion Batteries

Single-crystal structure helps enhance the thermal performance of Ni-rich layered cathode materials for lithium-ion batteries

Thermal stress-induced charge and structure heterogeneity in emerging cathode materials

Oxygen-Release-Related Thermal Stability and Decomposition Pathways of Lixni0.5mn1.5o4 Cathode Materials

Thermal Expansion Neutralization Enhancing the Cycling Stability of Ni-Rich LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material

A Comparative Investigation of Single Crystal and Polycrystalline Ni‐Rich NCMs as Cathodes for Lithium‐Ion Batteries