Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

3D Morphology and Growth Mechanism of Primary Al3Ni in Directionally Solidified Al-16 Wt.% Ni Alloy

3D morphology and growth mechanism of primary Al 3 Ni in directionally solidified Al-16 wt% Ni alloy

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

From irregular to regular eutectic growth in the Al-Al3Ni system: in situ observations during directional solidification

In-Situ Observation on the Diversified Morphology and Growth Behavior of Al3Ni Phase at the Liquid Al/Solid Ni Interface

3-D Morphology and Growth Mechanism of Primary Al6Mn Intermetallic Compound in Directionally Solidified Al-3at.%Mn Alloy

Effect of Cooling Rate on the 3D Morphology of the Proeutectic Al 3 Ni Intermetallic Compound Formed at the Al/Ni Interface after Solidification

Faceted-Nonfaceted Growth Transition and 3-D Morphological Evolution of Primary Al6mn Microcrystals in Directionally Solidified Al-3 At.% Mn Alloy

Controllable 3D Morphology and Growth Mechanism of Quasicrystalline Phase in Directionally Solidified Al–Mn–Be Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

In Situ Study on the Growth Behavior of Primary Al 3 Ni Phase in Solidifying Al–Ni Alloy by Synchrotron Radiography

Microstructure Evolution of Directionally Solidified Al-25at.%Ni Peritectic Alloy

Continuous Morphological Transition and Its Mechanism of Al 3 Ni Phase at the Liquid–Solid Interface During Solidification

Investigating the Influence of Al Contents on Microstructure and Mechanical Properties of Ni 3 Al Superalloy Fabricated by Twin Wire‐Based Direct Arc Energy Deposition

Intergrowth Mechanism and Morphology Prediction of Faceted Al3Ni Formed During Solidification by a Spatial Geometric Model

Microstructure and Mechanical Properties of Ni 3 Al Intermetallics Prepared by Directional Solidification Electromagnetic Cold Crucible Technique

Characterization of Microstructural Length Scales in Directionally Solidified Sn-36%Ni Peritectic Alloy

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Competitive Grain Growth Mechanism in Three Dimensions During Directional Solidification of A Nickel-Based Superalloy

Alloying Effect on Microstructure and Mechanical Properties of Directionally Solidified Ti-Al-Nb Alloy