Abstract:The synthesis and properties of RPUF‐P and RPUF‐PPOA. Two types of bio‐based RPUFs (RPUF‐P and RPUF‐PPOA) were prepared that contained ethanol‐modified polyols (Polyol‐E) and one contained an epoxidized polyol modified with phosphoric acid (Polyol‐P), and the other contained epoxidized polyol modified with phenylphosphonic acid (Polyol‐PPOA). The cell morphologies, thermal and mechanical properties, and flame retardancy characteristics of the RPUF, RPUF‐P, and RPUF‐PPOA were studied by scanning electron microscopy (SEM), thermogravimetric analysis(TGA), compression tests, limiting oxygen index (LOI), and cone calorimetry test (CCT). The porous structures revealed that the cell sizes of both RPUF‐P and RPUF‐PPOA increased first and then decreased, and the number of pores decreased first and then increased. Furthermore, the apparent density showed a similar trend of increasing before decreasing. The compressive strengths of the RPUF‐P and RPUF‐PPOA were higher than that of the RPUF, and the compressive strength of the RPUF‐P was better than that of the RPUF‐PPOA, because the hydroxyl value of the Polyol‐P was much higher than that of the Polyol‐PPOA. The crosslinking density of the RPUF‐P prepared by the PM‐200 reaction was much higher than that of the RPUF‐PPOA. The LOI values of the RPUF‐P4 and RPUF‐PPOA4 were 21.68 and 23.10, respectively. Furthermore, the value of the peak of the heat release rate (HRR) was reduced by 40.3% compared with that of pure RPUF. The total heat release (THR), smoke produce rate (SPR), and total smoke release (TSR) decreased with increased Polyol‐P and Polyol‐PPOA addition. The flame‐retardancy residues micrographs showed that the carbon layers generated from the combustion of the RPUF‐P4 and the RPUF‐PPOA4 lacked perforated structures and exhibited better densification than the pure RPUF. Based on the analysis and discussion, the flame retardancy of RPUF‐P and RPUF‐PPOA were improved mainly through a condensed and gas phases mechanism.

The Thermal and Combustion Properties of Soybean Oil Phosphate-Based Polyurethane Foam Composites Containing Polyol of Etidronic Acid

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

The Synergistic Flame-Retardant Behaviors of Soybean Oil Phosphate-Based Polyols and Modified Ammonium Polyphosphate in Polyurethane Foam

Phosphorus-containing soybean oil-derived polyols for flame-retardant and smoke-suppressant rigid polyurethane foams

Phosphorus and nitrogen-containing soybean oil polyols: Effect on the mechanical properties and flame retardancy of polyurethane foam

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Polyurethane Rigid Foams Formed from Different Soy-Based Polyols by the Ring Opening of Epoxidised Soybean Oil with Methanol, Phenol, and Cyclohexanol

Flame retardant flexible polyurethane foams based on phosphorous soybean-oil polyol and expandable graphite

Improved thermal stability and flame retardancy of soybean oil-based polyol rigid polyurethane foams modified with magnesium borate hydroxide and ammonium polyphosphate

Synthesis Of Soy-Polyols Using A Continuous Microflow System And Preparation Of Soy-Based Polyurethane Rigid Foams

Synthesis of reactive DOPO-based flame retardant and its application in rigid polyisocyanurate-polyurethane foam

Preparation and intrinsical flame resistance of reed-based polyurethane foam modified by 9,10-dihydro-9-oxa-10 phosphaphenanthrene 10-oxide

Full Substitution of Petroleum-Based Polyols by Phosphorus-Containing Soy-Based Polyols for Fabricating Highly Flame-Retardant Polyisocyanurate Foams

Preparation and Characterization of Novel Rigid Polyurethane Foams by Epoxidized Soybean Oil

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Phosphorus and Nitrogen-Containing Polyols: Synergistic Effect on the Thermal Property and Flame Retardancy of Rigid Polyurethane Foam Composites

Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer

Waste-Cooking-Oil-Derived Polyols to Produce New Sustainable Rigid Polyurethane Foams

Fabrication of nickel phytate modified bio-based polyol rigid polyurethane foam with enhanced compression-resistant and improved flame-retardant

Preparation of aliphatic bio-based polyester polyols for water-blown and halogen-free flame retardant rigid polyurethane foam