Biobased Phosphorus Siloxane-Containing Polyurethane Foam with Flame-Retardant and Smoke-Suppressant Performances

Shibo Wang,Siheng Wang,Minggui Shen,Xu Xu,He Liu,Dan Wang,Hongxiao Wang,Shibin Shang
DOI: https://doi.org/10.1021/acssuschemeng.1c02273
2021-06-15
Abstract:Rigid polyurethane foam (RPUF) is one of the most widely used construction materials, but it is flammable and releases toxic smoke during combustion. In this study, a novel, synergistic-effect flame retardant (FPASO-DOPO) was synthesized by the Atherton–Todd reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with fumaropimaric acid-based siloxane (FPASO). The obtained FPASO-DOPO was then introduced into the cross-linking network of an RPUF by chemical bonding. The flame retardancy was enhanced by the synergistic effect of phosphorus and silicon in the FPASO-DOPO, which captured the free radical in the gaseous phase and formed a compact silica-rich char layer in the condensed phase. More importantly, the incorporation of FPASO-DOPO not only increased the limiting oxygen index from 17.0% to 26.1% but also reduced the total smoke release by 17.5%. A cone-calorimeter test indicated that the peak heat-release rate of the modified foam was reduced by 33.7% compared with that of neat RPUF. Calculations determined that the flame retardancy index (FRI) value was 7.88 for a modified foam, which shows a "good" flame retardancy. Moreover, the modified foams exhibited improvements in both compressive and flexural strength owing to the introduction of the rosin. This study has important implications for the development of modified polymers with good flame and smoke suppression from renewable resources.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02273?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02273</a>.Additional FPASO-DOPO characterization; FT-IR and <sup>1</sup>H NMR spectra of FPASO-DOPO; EDS mapping of FPASO-DOPO; elemental analysis of FPASO-DOPO and foams; curing behaviors of foams at a heating rate of 10 °C/min; thermal stability of FPASO-DOPO; formulation of sample DOPO-RPUF 20%; and comparison of compressive strengths between P-RPUF, FR-RPUF 20%, and DOPO-RPUF 20% (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_001.pdf">PDF</a>)Video of the flammability test (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.
chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
What problem does this paper attempt to address?