Abstract:The synthesis and properties of RPUF‐P and RPUF‐PPOA. Two types of bio‐based RPUFs (RPUF‐P and RPUF‐PPOA) were prepared that contained ethanol‐modified polyols (Polyol‐E) and one contained an epoxidized polyol modified with phosphoric acid (Polyol‐P), and the other contained epoxidized polyol modified with phenylphosphonic acid (Polyol‐PPOA). The cell morphologies, thermal and mechanical properties, and flame retardancy characteristics of the RPUF, RPUF‐P, and RPUF‐PPOA were studied by scanning electron microscopy (SEM), thermogravimetric analysis(TGA), compression tests, limiting oxygen index (LOI), and cone calorimetry test (CCT). The porous structures revealed that the cell sizes of both RPUF‐P and RPUF‐PPOA increased first and then decreased, and the number of pores decreased first and then increased. Furthermore, the apparent density showed a similar trend of increasing before decreasing. The compressive strengths of the RPUF‐P and RPUF‐PPOA were higher than that of the RPUF, and the compressive strength of the RPUF‐P was better than that of the RPUF‐PPOA, because the hydroxyl value of the Polyol‐P was much higher than that of the Polyol‐PPOA. The crosslinking density of the RPUF‐P prepared by the PM‐200 reaction was much higher than that of the RPUF‐PPOA. The LOI values of the RPUF‐P4 and RPUF‐PPOA4 were 21.68 and 23.10, respectively. Furthermore, the value of the peak of the heat release rate (HRR) was reduced by 40.3% compared with that of pure RPUF. The total heat release (THR), smoke produce rate (SPR), and total smoke release (TSR) decreased with increased Polyol‐P and Polyol‐PPOA addition. The flame‐retardancy residues micrographs showed that the carbon layers generated from the combustion of the RPUF‐P4 and the RPUF‐PPOA4 lacked perforated structures and exhibited better densification than the pure RPUF. Based on the analysis and discussion, the flame retardancy of RPUF‐P and RPUF‐PPOA were improved mainly through a condensed and gas phases mechanism.

Preparation of aliphatic bio-based polyester polyols for water-blown and halogen-free flame retardant rigid polyurethane foam

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

Reactive flame-retardants prepared by transesterification between erythritol and dimethyl methyl phosphonate for rigid polyurethane foams

Research on Properties of Rigid Polyurethane Foam with Heteroaromatic and Brominated Benzyl Polyols

Synthesis and Characterization of Flame-Retardant Rigid Polyurethane Foams Derived from Gutter Oil Biodiesel

Elaboration of Thermally Performing Polyurethane Foams, Based on Biopolyols, with Thermal Insulating Applications

Lightweight Biobased Polyurethane Composites Derived from Liquefied Polyol Reinforced by Biomass Sources with High Mechanical Property and Enhanced Fire-Resistance Performance

Functionalized Lignin for Halogen-Free Flame Retardant Rigid Polyurethane Foam: Preparation, Thermal Stability, Fire Performance and Mechanical Properties

Preparation of a catalyst-free and water-blown rigid polyurethane foam from malic-co-citric acid-based polyols

Bio-Based Rigid Polyurethane Foams Modified with Phosphorus Flame Retardants

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Preparation and properties investigation of flame‐retardant rigid polyurethane foam composites based on alkylphosphate oligomer

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

Preparation and intrinsical flame resistance of reed-based polyurethane foam modified by 9,10-dihydro-9-oxa-10 phosphaphenanthrene 10-oxide

Preparation and Properties of Water-blown Polyurethane Rigid Foam with Flame Retardants

Inherently Flame-Retardant Rigid Polyurethane Foams with Excellent Thermal Insulation and Mechanical Properties

Fully bio-based and intrinsically flame retardant unsaturated polyester cross-linked with isosorbide-based diluents

Preparation, Characterization and Thermal Degradation Behavior of Rigid Polyurethane Foam Using a Malic Acid Based Polyols

Flame Retarded Rigid Polyurethane Foams Composites Modified by Aluminum Diethylphosphinate and Expanded Graphite

Preparation and Properties of Rigid Polyurethane Foam with Flame Retardants