Abstract:Sugar beet pulp polyol‐based rigid polyurethane foam composites as environmentally‐friendly insulation material. The building and construction industry is under increasing pressure to make insulation materials greener, more sustainable, and less flammable. In this study, sugar beet pulp was liquified under the optimized liquefaction conditions and used as the source of bio‐polyol (SBpol) in the production of bio‐based rigid polyurethane foam (sPUF). In order to improve the flame retardancy, sPUF composites were prepared with the addition of flame retardants; expandable graphite (EG) and/or dimethyl methyl phosphonate (DMMP). The bio‐polyol was used at a fixed ratio of 50 php in sPUF composites whereas the total ratio of flame retardants was fixed at 20 php. The effects of the ratio of EG and/or DMMP on the morphological, physicomechanical, thermal, and flame retardant properties of sPUF composites were evaluated. Although the thermal conductivity values of flame retardant added sPUF composites were increased in comparison to the petroleum‐based foam, the compressive strength values were decreased as the amount of DMMP increased in the flame retardant formulation. Thermogravimetric analysis showed that the onset of decomposition of 20 php DMMP‐containing sPUF composite decreased to 168.3°C. Although the limiting oxygen index (LOI) value of the petroleum‐based PUF was as low as 19.7%, the LOI value of the sPUF/10E/10D foam increased to 24.9% (by about 26%). According to the cone calorimeter results, the peak heat release rate (pHRR) of sPUF was much higher than the petroleum‐based foam. The incorporation of both DMMP and EG could further improve the flame retardant properties. The pHRR value of sPUF/10E/10D was 28.1% lower than that of sPUF. The results have shown that flame retardancy of sPUF composites could be improved by the addition of EG which acts in the condensed phase and DMMP, which acts mainly in the gas phase during burning. Flame retardant incorporated sPUF composites are considered as promising materials for use in insulation applications.

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

Bio-Based Rigid Polyurethane Foams Modified with Phosphorus Flame Retardants

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Synthesis and Characterization of Flame-Retardant Rigid Polyurethane Foams Derived from Gutter Oil Biodiesel

Application of Castor Oil Polyol in the Flame-Retardant Rigid Polyurethane Foam

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Bio-Based Polyurethane Foams from Kraft Lignin with Improved Fire Resistance

Lightweight Biobased Polyurethane Composites Derived from Liquefied Polyol Reinforced by Biomass Sources with High Mechanical Property and Enhanced Fire-Resistance Performance

Influence of Expandable Graphite on Comprehensive Performance of All-Water Blown Flame Retardant Rigid Polyurethane Foams

Preparation of aliphatic bio-based polyester polyols for water-blown and halogen-free flame retardant rigid polyurethane foam

Durable flame-retardant, smoke-suppressant, and thermal-insulating biomass polyurethane foam enabled by a green bio-based system

Green flame-retardant rigid polyurethane foam with cobalt hydroxystannate to improve the thermal stability, flame retardancy and smoke suppression properties

Fabrication of Fire Safe Rigid Polyurethane Foam with Reduced Release of CO and NOx and Excellent Physical Properties by Combining Phosphine Oxide-Containing Hyperbranched Polyol and Expandable Graphite

Enhancing the Fire Safety and Smoke Safety of Bio–Based Rigid Polyurethane Foam Via Inserting a Reactive Flame Retardant Containing P@N and Blending Silica Aerogel Powder

Improved thermal stability and flame retardancy of soybean oil-based polyol rigid polyurethane foams modified with magnesium borate hydroxide and ammonium polyphosphate

Highly Efficient Flame Retardancy and Fire Spread Behavior of Rigid Polyurethane Foams with extremely low content of Flame Retardant

Hemp Seed Oil Derived Rigid Polyurethane Foams and Their Underlying Flame Retardancy Properties

Lignin-derived Core-Shell Flame Retardants for Fire-Safety Rigid Polyurethane (RPU) Insulations

Fabrication of nickel phytate modified bio-based polyol rigid polyurethane foam with enhanced compression-resistant and improved flame-retardant

Bio‐based rigid polyurethane foam composites reinforced with flame retardants: From synthesis to performance evaluation