Abstract:Rigid polyurethane foam (RPUF) is one of the most widely used construction materials, but it is flammable and releases toxic smoke during combustion. In this study, a novel, synergistic-effect flame retardant (FPASO-DOPO) was synthesized by the Atherton–Todd reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with fumaropimaric acid-based siloxane (FPASO). The obtained FPASO-DOPO was then introduced into the cross-linking network of an RPUF by chemical bonding. The flame retardancy was enhanced by the synergistic effect of phosphorus and silicon in the FPASO-DOPO, which captured the free radical in the gaseous phase and formed a compact silica-rich char layer in the condensed phase. More importantly, the incorporation of FPASO-DOPO not only increased the limiting oxygen index from 17.0% to 26.1% but also reduced the total smoke release by 17.5%. A cone-calorimeter test indicated that the peak heat-release rate of the modified foam was reduced by 33.7% compared with that of neat RPUF. Calculations determined that the flame retardancy index (FRI) value was 7.88 for a modified foam, which shows a "good" flame retardancy. Moreover, the modified foams exhibited improvements in both compressive and flexural strength owing to the introduction of the rosin. This study has important implications for the development of modified polymers with good flame and smoke suppression from renewable resources.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02273?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02273</a>.Additional FPASO-DOPO characterization; FT-IR and <sup>1</sup>H NMR spectra of FPASO-DOPO; EDS mapping of FPASO-DOPO; elemental analysis of FPASO-DOPO and foams; curing behaviors of foams at a heating rate of 10 °C/min; thermal stability of FPASO-DOPO; formulation of sample DOPO-RPUF 20%; and comparison of compressive strengths between P-RPUF, FR-RPUF 20%, and DOPO-RPUF 20% (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_001.pdf">PDF</a>)Video of the flammability test (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

High-performance flexible polyurethane from renewable castor oil: Preparation, properties and mechanism

Green flame-retardant flexible polyurethane foam based on cyclodextrin

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

Preparation and intrinsical flame resistance of reed-based polyurethane foam modified by 9,10-dihydro-9-oxa-10 phosphaphenanthrene 10-oxide

Lightweight Biobased Polyurethane Composites Derived from Liquefied Polyol Reinforced by Biomass Sources with High Mechanical Property and Enhanced Fire-Resistance Performance

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

Synthesis of a green reactive flame‐retardant polyether polyol and its application

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Preparation and mechanism study of intrinsic hard segment flame‐retardant polyurethane foam

Synthesis of bio-castor oil polyurethane flexible foams and the influence of biotic component on their performance

Fabrication of Fire Safe Rigid Polyurethane Foam with Reduced Release of CO and NOx and Excellent Physical Properties by Combining Phosphine Oxide-Containing Hyperbranched Polyol and Expandable Graphite

Hierarchical Ti3C2Tx@BPA@PCL for flexible polyurethane foam capable of anti-compression, self-extinguishing and flame-retardant

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Preparation of aliphatic bio-based polyester polyols for water-blown and halogen-free flame retardant rigid polyurethane foam

The improvement of fire safety performance of flexible polyurethane foam by Highly-efficient P-N-S elemental hybrid synergistic flame retardant

Bio-Based Polyurethane Foams with Castor Oil Based Multifunctional Polyols for Improved Compressive Properties

Flame-Retardant Vegetable Oil-based Rigid Polyurethane Foam Constructed with Mxene@HNT and Hydrogel via Layer-by-Layer Coating

Biobased Phosphorus Siloxane-Containing Polyurethane Foam with Flame-Retardant and Smoke-Suppressant Performances

Highly Efficient Flame Retardancy and Fire Spread Behavior of Rigid Polyurethane Foams with extremely low content of Flame Retardant

Flame Retardancy Behaviors of Flexible Polyurethane Foam Based on Reactive Dihydroxy P–N-containing Flame Retardants

Green flame-retardant rigid polyurethane foam with cobalt hydroxystannate to improve the thermal stability, flame retardancy and smoke suppression properties