Abstract:This paper describes a novel three-wire thermal flow sensor for medical applications. The present innovation for low-frequency measurements involves the use of a pulsed-wire anemometer with a comparatively large wire diameter (12.5 microm and larger) together with a novel signal processing approach. A small wire is heated using a sinusoidal alternating current, and two sensing wires, acting as resistance thermometers, are set parallel to, and at a small distance on either side of, the pulsed wire. The thermal wake of the pulsed wire is convected downstream to one of the two receiving wires which detect its delayed arrival. This arrangement allows the sensing of both the direction and the flow velocity component normal to the three probes. By appropriate signal processing, the present sensor can be operated such that the phase shift between the periodic current that drives the central wire and the detected signal by either the upstream or downstream wire takes into account a combination of convection, diffusion and the finite thermal response time of both the pulsed wire and the receiving wire. Because the time constants increase as the flow velocity decreases, the time lag due to thermal inertia supplements the time lag due to the true time of flight, thus yielding an effective operating range of 0.05 m/s <or= U <or= 25 m/s , which corresponds to a dynamic range of 500:1. This wide velocity range is an order of magnitude larger than that for the traditional time-of-flight pulsed-wire anemometers. An important application of the bi-directional thermal flowmeter is the measurement of human respiration, e.g. for early diagnostics of asthmatic attacks. The main advantage of the present sensor is its low sensitivity to variations in temperature and also to the composition of the flowing gas. Also, a calibration will be not needed for each density and gas used in addition to that for velocity. The resultant design work aimed at developing a sensor that can be mass-produced at low cost.

Performance Enhanced Thermal Flow Sensor with Novel Dual-Heater Structure Using CMOS Compatible Fabrication Process

A New Method for Flow Rate Measurement in Millimeter-Scale Pipes.

Design of Thermal Liquid Flow Microsensor

A Device and Method For Flowrate Measurement of Fluid in Small Channel Based on C~4D Technique

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

High Performance Bidirectional Thermal Gas Flow Sensor of (100) Silicon Single-Sided Fabrication by 45-Tilted Dicing

Investigation on the Effective Measures for Improving the Performance of Calorimetric Microflow Sensor

Fabrication and characterization of high-sensitivity, wide-range, and flexible MEMS thermal flow velocity sensors

Vanadium Dioxide-Based High Sensitivity Dual-Heater Calorimetric Microfluidic Sensor

Non-Silicon MEMS Calorimetric Gas Flow Sensor

Design and Modeling of Vanadium Dioxide-Based High-Sensitivity Microfluidic Calorimetric Sensors

Monolithically Integrated Bidirectional Flow Sensor and Stacked Temperature/Humidity Sensor Based on CMOS-Compatible MEMS Technology

A Self-Packaged Thermal Flow Sensor by CMOS MEMS Technology

Highly Sensitive Flow Sensor Based on Flexible Dual-Layer Heating Structures

Bi-directional flow sensor with a wide dynamic range for medical applications

A Three-Dimensional Integrated Micro Calorimetric Flow Sensor in CMOS MEMS Technology

Structural Design of Dual-Type Thin-Film Thermopiles and Their Heat Flow Sensitivity Performance

A numerical investigation of conjugate forced heat transfer for a micro thermal flow sensor

Systematic Study of Packaging Designs on the Performance of CMOS Thermoresistive Micro Calorimetric Flow Sensors

A micro channel integrated gas flow sensor for high sensitivity

Mems Thermal Mass Flow Meter With Double-Heater Structure