Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Design and Experimental Research of a High-Precision Piezoelectric Control Valve

Design and modeling of precise flux valve driven by piezoelectric ceramics

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Piezoelectric Actuator and Its Application in Hydraulic Valves

Design and Characteristics Analysis of a High Precision Pneumatic Proportional Pressure Valve

Design and Simulation of Pneumatic Proportional Extra-High Pressure Valve

Working Mechanisms and Experimental Research of Piezoelectric Pump with a Cardiac Valve-like Structure.

Simulation of the Piezoelectric High-Speed On/off Valve

Theoretical Design for a Novel Piezoelectric On/Off Valve

Development of a High Differential Pressure Piezoelectric Active Proportional Regulation Valve Using a Bending Transducer

Development of a Piezoelectric Pump with Ball Valve Structure

Design Of A Piezoelectric Exciter Actuator For Micro-Displacement Control - Theory And Experiment

Development of a High-Pressure Self-Priming Valve-Based Piezoelectric Pump Using Bending Transducers

Design and performance analysis of a piezoelectric jetting dispensing valve

Implementation of Piezoelectric Actuators for Pilot Valve of High Response Hydraulic Servo Valve

Development of a Piezoelectric Pump with Unfixed Valve

Design and Testing of a Valveless Piezoelectric Pump with Conical Vortex Diodes

Design of a Simple Valveless Micropump Using Piezoelectric Actuators

Simulation Analysis of High Frequency and High Pressure Piezoelectric Micro-Pump

Piezoelectric actuators for screw-in cartridge valves

Design and Analysis on two-stage proportional electro-hydraulic pressure reducing valve driven by piezoelectric actuator