Abstract:Many hydraulic tools, like hydraulic cylinders and hydraulic artificial muscle joints are operated by adjusting pressure differences between different zones. Typically, the method employed to change the pressure difference is establishing hydraulic bridges and adjusting liquid resistance. While effective, this method's drawback is complex structures. To address this issue, a water-hydraulic pressure difference control valve, integrating two hydraulic bridges, was designed. The static performances including the output pressure difference, the flow rate and the force acting on the valve core were analyzed using AMESim and computational fluid dynamics simulations. Based on the simulation results, a prototype of voice coil motor direct drive pressure difference control valve was manufactured and the corresponding experiments were carried out. The computational fluid dynamics simulation results show that the internal leakage and the through-flow capacity difference between throttling grooves affect the flow field characteristics of the valve. When the pump pressure is 3 MPa and the valve opening is at the middle position, the internal leakage increases the flow rate from 2.25 L/min to 2.38 L/min, and the through-flow capacity difference reduces the control port pressure from the theoretical analysis of 1.5 MPa to 1.41 MPa. Furthermore, combined with the analysis of the external liquid resistance, the AMESim model of the pressure difference control valve is modified. When the pump pressure is 3 MPa, the pressure difference and flow rate average deviations between the modified AMESim model and the experiment are 0.021 MPa and 0.048 L /min. Finally, a rotational angle experiment for a water hydraulic artificial muscle joints showed satisfactory control effects, suggesting the valve's application in controlling hydraulic tools and actuators.

Design and modeling of precise flux valve driven by piezoelectric ceramics

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Design and Characteristics Analysis of a High Precision Pneumatic Proportional Pressure Valve

Design and Simulation of Pneumatic Proportional Extra-High Pressure Valve

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Design and Experimental Research of a High-Precision Piezoelectric Control Valve

Modeling, simulation and experimental research on pressure tracking valve

Piezoelectric Actuator and Its Application in Hydraulic Valves

Study of Proportion and Fuzzy Control Method Upon Precision Micro-Flow Valve

Theoretical Design for a Novel Piezoelectric On/Off Valve

Design and Analysis on two-stage proportional electro-hydraulic pressure reducing valve driven by piezoelectric actuator

Design of Pilot-Assisted Load Control Valve for Proportional Flow Control and Fast Opening Performance Based on Dynamics Modeling

Development of a High Differential Pressure Piezoelectric Active Proportional Regulation Valve Using a Bending Transducer

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Application of Proportion and Fuzzy Control Method on Piezoelectric Ceramic Actuators

Development of a Piezoelectric Pump with Ball Valve Structure

Simulation Analysis and Experimental Research on Static Performance of Water-hydraulic Pressure Difference Control Valve

Fluid–structure coupling modelling and parameter optimization of a direct-acting relief valve for underwater application

Working Mechanisms and Experimental Research of Piezoelectric Pump with a Cardiac Valve-like Structure.

The Design and Experimental Research on a High-Frequency Rotary Directional Valve

Experimental Investigation of an Automatic Flux Compensation Valve