Abstract:Direct-acting relief valve is widely applied in pumps for control of pump pressure; when it is applied by underwater equipment, its dynamic stability is challenged by the varied hydraulic pressure due to the variation of its underwater penetration; specifically, sudden jumps of pump pressure can be triggered, which brings harmful influence on the normal working condition of underwater equipment. In order to fully understand this phenomenon, a two-degree-of-freedom fluid–structure coupling model is developed by considering both the axial and longitudinal vibro-impacts between the valve element and the valve seat, whose external excitation comes from the flowing fuel which has been accelerated to a high speed in the narrow channel of relief valve. Based on the developed mathematical model, the predicted errors about the water depth for appearance of the sudden jump of pressure are verified within 5% when compared with the corresponding experimental results. Moreover, the axial vibro-impact oscillation of the valve element is demonstrated as the origin of such drastic fluctuation of pump pressure. In order to further control the sudden jumps of pressure, parameter optimization with reliability analysis is carried out via an optimization closed loop which consists of design of experiment algorithm, Monte Carlo algorithm and six sigma algorithm. Based on the optimized combination of parameters, the pressure stability of the direct-acting relief valve is secured within its working water depth as [0 m, 300 m], and the differential pressure at the valve port remains a linear variation without sudden jump, and the maximal change of the differential pressure is around 3.6 MPa, which is determined by the variation of water depth.Graphic abstract

Fluid–structure coupling modelling and parameter optimization of a direct-acting relief valve for underwater application

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Parameter cooperative matching optimization method for anti-cavitation structure of unloading valve

Research on control characteristic and compensation of water hydraulic proportional pressure relief valve

Modeling and Characteristics Investigation on a Load Control Valve

Modelling and Experimental Verification of Pressure Relief Synchronous Control for Small Trapped Fluid Volumes.

Properties of Pilot-Operated Water Hydraulic Relief Valve with Different Structure Parameters

Experimental Study on the Water Hydraulic Unloading Relief Valve

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Design and modeling of precise flux valve driven by piezoelectric ceramics

Modeling, simulation and experimental research on pressure tracking valve

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation

Mechanical and System Simulation Modeling and Analysis of Surge Relief Valve

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Simulation and Design Improvement of a Low Noise Control Valve in Autonomous Underwater Vehicles

Static and Dynamic Performance Improvement of a Hydraulic Feedback Valve for Load Control by Introducing Force Feedback and Compensation Orifice

Design of Pilot-Assisted Load Control Valve for Proportional Flow Control and Fast Opening Performance Based on Dynamics Modeling

Simulation and Optimal Design of High-Pressure-Differential and High-Solid-Phase Relief Valves

Research on the Optimal Design of a Pilot Valve Controlling Cut-Off Valve