Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Piezoelectric actuators for screw-in cartridge valves

Research on Screw-in Cartridge Valves Using Piezoelectric Actuator

Piezoelectric Actuator and Its Application in Hydraulic Valves

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Theoretical Design for a Novel Piezoelectric On/Off Valve

Design and modeling of precise flux valve driven by piezoelectric ceramics

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Simulation of the Piezoelectric High-Speed On/off Valve

Simulation of a high frequency on/off valve actuated by a piezo-ring stack for digital hydraulics

Development of a Piezoelectric Pump with Ball Valve Structure

Design and Experimental Research of a High-Precision Piezoelectric Control Valve

Design and testing of a high power piezo pump for hydraulic actuation

Application of Smart Materials in the Actuation System of a Gas Injector

Implementation of Piezoelectric Actuators for Pilot Valve of High Response Hydraulic Servo Valve

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Comprehensive Numerical Analysis of a Four-Way Two-Position (4/2) High-Frequency Switching Digital Hydraulic Valve Driven by a Ring Stack Actuator

Energy-saving, High-Pressure Resistant Mini Valve Based on a Bistable Electromagnetic Actuator

Working Mechanisms and Experimental Research of Piezoelectric Pump with a Cardiac Valve-like Structure.

Study on a Nozzle Flapper Gas Valve Based on Piezoelectric Stacks

Design and performance analysis of a piezoelectric jetting dispensing valve