Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Study on a Nozzle Flapper Gas Valve Based on Piezoelectric Stacks

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Design and modeling of precise flux valve driven by piezoelectric ceramics

Piezoelectric Actuator and Its Application in Hydraulic Valves

Study on ultrahigh pressure and large flow rate pneumatic on-off valve

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Theoretical Design for a Novel Piezoelectric On/Off Valve

Study on the Diffuser/Nozzle-Based Valve Less Piezoelectric Pump

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Design and performance analysis of a piezoelectric jetting dispensing valve

Simulation of the Piezoelectric High-Speed On/off Valve

Piezoelectric actuators for screw-in cartridge valves

Design and performance analysis of an embedded amplified piezoelectric jetting dispensing valve

Energy-saving, High-Pressure Resistant Mini Valve Based on a Bistable Electromagnetic Actuator

Simulation of a high frequency on/off valve actuated by a piezo-ring stack for digital hydraulics

A Valveless Piezoelectric Micropump with Flexure Connection Structure

Design and Experiment of a Solder Paste Jetting System Driven by a Piezoelectric Stack

Research on Screw-in Cartridge Valves Using Piezoelectric Actuator

Research on the performance of a valveless piezoelectric pump with a herringbone bluffbody

Development of a High-Pressure Self-Priming Valve-Based Piezoelectric Pump Using Bending Transducers