Abstract:In this study, with the meso-scale model reliably validated in our previous work (Construction and Building Materials, 2018), the waveform features of plain concrete under various loading conditions and especially with considering stress non-equilibrium are reliably reproduced and predicted. Associating with waveform features, the violation indicator of the specimen stress equilibrium in the split Hopkinson pressure bar test is identified for concrete-like damage softening materials. The concrete material behaviors for stress non-equilibrium are further analyzed, e.g. the dynamic increase factor (DIF) and damage development, etc. The conception of "damage failure volume" is introduced, and a new method of defining the development of concrete dynamic damage is given in the numerical study. What's more, the "compression wave" and "double peak" phenomena observed in the experiment are further interpreted based on the means of numerical simulation. Waveform features how to reflect the concrete material properties is also concluded. The results show that, the disappearance of the "double peak" phenomenon of reflection curve under high strain rate can be regarded as the indicator of the violation of stress equilibrium. After the violation of the stress equilibrium, the relevant DIFs of the concrete specimen will not change significantly. Especially, the concrete specimen will turn into structural response from material response. The conception of "damage failure volume" can well explain the generation of the "double peak" phenomenon of the reflection curve. The "compression wave" phenomenon of reflection curve under lower strain rates is derived from the unloading expansion recovery of the concrete specimen. Furthermore, under the same loading condition, the amplitude of the first peak of the reflection curve can be used as the evaluation standard of the bonding quality between mortar and aggregates.

Nondestructive Evaluation of Concrete Compressive Strength Using Shear-Horizontal Waves

Axial stress measurement of concrete with nonlinear ultrasonic harmonic method

Application of Surface Wave Method for Nondestructive Testing of Hydraulic Tunnel Concrete

Non-destructive concrete strength evaluation using smart piezoelectric transducer—a comparative study

Ultrasonic assessment of compressive strength of underwater concrete considering various mix parameters

Investigation of early-age concrete strength development using a contactless ultrasonic method

Estimation of compressive strength of concrete structures using the ultrasonic pulse velocity method and spectral analysis of surface wave method

A solitary wave-based sensor to monitor the setting of fresh concrete

Improved Rayleigh Wave Velocity Measurement for Nondestructive Early-Age Concrete Monitoring

Estimating the Strength of High Performance Concrete Using Acoustic Parameters

Experimental and Numerical Studies on the Dynamic Behaviors of Concrete Material Based on the Waveform Features in SHPB Test

Further numerical investigation on concrete dynamic behaviors with considering stress non-equilibrium in SHPB test based on the waveform features

Quasi-Non-Destructive Estimation of Concrete Compression Strength Using Laser-Induced Breakdown Spectroscopy and Multivariate Analysis

Detecting Compressive Strength of Pouring Piles Concrete by Ultrasonic Method

Improving Non-Destructive Concrete Strength Tests Using Support Vector Machines

Tentative Research on Non-Destructive Detection of Early-Age Elastic Modulus of Concrete

A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing

Ultrasonic imaging of concrete-embedded corroded steel liners using linear and nonlinear evaluation

NDT response of spectral analysis of surface wave method to multi-layer thin high-strength concrete structures

Application Progress of Nondestructive Testing Technique of Hydraulic Concrete Based on Steady Rayleigh Wave Method

Monitoring the curing process of in-situ concrete with piezoelectric-based techniques – A practical application