Abstract:This article presents an investigation into the effects of natural seawater and sea sand on the behaviour of unconfined and fibre-reinforced polymer-confined concrete. The experimental programme covered compression tests of a large number of standard concrete cylinders, which were prepared from the following four series of concrete: (1) the reference normal concrete, (2) sea-sand concrete, (3) seawater concrete (SwC), and (4) seawater sea-sand concrete. The concrete cylinders were either unconfined or confined with externally wrapped carbon fibre-reinforced polymer jackets to be tested at various ages from the early to the long term. This article presents the results of the first-phase tests, which covered a total of 48 specimens from the four series of concrete, with a half of them tested in the unconfined condition at the ages of 7 and 28 days, and another half tested with either one-ply or two-ply carbon fibre-reinforced polymer jackets at 28 days. The results show that at the ages of 7 and 28 days, the unconfined concrete specimens prepared with seawater and/or sea sand developed a slightly higher compressive strength, as compared to those prepared from normal concrete. When confined with carbon fibre-reinforced polymer jackets, the compressive stress–strain responses of concrete with or without seawater and/or sea sand were very similar. The use of seawater and sea sand did not seem to have significant effects on the compressive strength, ultimate axial strain and stress–strain responses of confined concrete, and the ultimate strain capacity of carbon fibre-reinforced polymer jackets neither. The test results were also compared with the predictions of an existing analysis-oriented stress–strain model for fibre-reinforced polymer-confined concrete. It is shown that the compressive strength, ultimate axial strain, stress–strain responses and dilation behaviour of the carbon fibre-reinforced polymer-confined concrete with or without seawater/sea sand can be reasonably well predicted.

Investigation of early-age concrete strength development using a contactless ultrasonic method

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Dynamic property determination for early-age concrete

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

Evaluation of Condition of Concrete Structures Using Ultrasonic Pulse Velocity Method

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Estimation of compressive strength of concrete structures using the ultrasonic pulse velocity method and spectral analysis of surface wave method

Early-Age Index Choosing for Long-Term Quality Evaluation of Concrete Structures

Interpretation of Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement

Influence of Early Age on the Wave Velocity and Dynamic Compressive Strength of Concrete Based on Split Hopkinson Pressure Bar Tests

Nondestructive Curing Monitoring of Early-Age Concrete Using Rayleigh Wave Velocity

Study on the Electrical Properties of Young Concrete

Statistical Reliability Analysis of Ultrasonic Velocity Method for Predicting Residual Strength of High-Strength Concrete under High-Temperature Conditions

Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors

Monitoring the curing process of in-situ concrete with piezoelectric-based techniques – A practical application

Evaluation of Early Age Mechanical Properties of Concrete in Real Structure

Monitoring of Strength Gain in Concrete Using Smart Pzt Transducers

Improved Rayleigh Wave Velocity Measurement for Nondestructive Early-Age Concrete Monitoring

On the relation of setting and early-age strength development to porosity and hydration in cement-based materials

Monitoring and estimate of concrete compressive strength in full curing period using smart piezoelectric modules