A Humidity-Tolerant NO2 Sensor Based on Ag3PO4–SnSe2 Heterostructures

Juanyuan Hao,Wen Lu,Dongmin Yin,Weixun Hao,You Wang

DOI: https://doi.org/10.1039/d2nj06076k

IF: 3.3

2023-01-01

New Journal of Chemistry

Abstract:Ag3PO4–SnSe2 heterostructures are constructed as a sensing material and show excellent NO2-sensing performance at high relative humidity.

What problem does this paper attempt to address?

SnSe2/Ag2Se Heterostructures with an Accumulation Layer for Rapid and Sensitive Detection of NO2

Junpeng Mao,Dongmin Yin,Wen Lu,You Wang,Zhenze Zhou,Weixun Hao,Xiangqun Chen,Juanyuan Hao

DOI: https://doi.org/10.1039/d3nj02803h

IF: 3.3

2023-01-01

New Journal of Chemistry

Abstract:The SnSe2/Ag2Se heterostructure is potential for rapid detection of NO2owing to the synergistic effect of increased adsorption sites and the enhanced charge transfer.
Ag2Te Nanowires for Humidity-Resistant Trace-Level NO2 Detection at Room Temperature

Zhen Yuan,Qiuni Zhao,Zaihua Duan,Chunyan Xie,Xiaohui Duan,Shaorong Li,Zongbiao Ye,Yadong Jiang,Huiling Tai

DOI: https://doi.org/10.1016/j.snb.2022.131790

2022-01-01

Abstract:As one of the obstinate problems for gas sensors, humidity interference has troubled researchers for decades. In this short communication, an n-type semiconductor Ag2Te is selected as the NO2 gas sensing material. Through the hydrothermal method, Ag2Te nanowires are synthesized and then spin-coated on an integrated electrode to fabricate gas sensor. The sensing properties of the Ag2Te sensor are investigated at room temperature (similar to 25 degrees C) and 50% relative humidity (RH), revealing its good sensing characteristics towards NO2 with a rapid response (10.2 s towards 5 ppm NO2), low limit of detection (ppb-level), and repeatable detection. It is worth noting that the Ag2Te sensor is humidity resistible. The resistance of Ag2Te sensor in air and 1 ppm NO2 are both stable in humidity range from 10% to 90% RH with resistance variation of 1.84%and 0.95% respectively, demonstrating the humidity-resistant property of the Ag2Te sensor. This work is expected to provide a new pathway for the development of room temperature humidity-resistant gas sensors.
Ultrasensitive NH3 sensor based on Ag3PO4&nano-Ag co-modified SnS with humidity compensation

Yuxiang Qin,Xiaoxuan Liu,Peilun Qiu,Bing Li

DOI: https://doi.org/10.1016/j.apsusc.2024.159542

IF: 6.7

2024-05-01

Applied Surface Science

Abstract:Stannous sulfide (SnS), a representative of two-dimensional (2D) layered monosulfide, shows a broad application in gas sensing due to its unique honeycomb-folded geometry and sensing capability at room temperature. However, the weak response of pure SnS to NH3 and poor humidity resistance limit its gas-sensing application in certain special scenarios like breath analysis. Herein, we propose a co-modulation strategy of combining special heterogeneous design and nano-Ag modification to construct novel nanocomposite of Ag3PO4&Ag@SnS, effectively improving the NH3-sensitive performance of SnS under high humidity conditions. Gas-sensing measurements indicate that the prepared Ag3PO4&Ag@SnS sensor had a low detection limit of 6.73 ppb and showed a 6.17-flod higher response to 10 ppm NH3 than that of pure SnS. It also showed an excellent humidity resistance, as evidence that the response value to10 ppm NH3 at 97% RH is 84.03% of that at 10% RH. The NH3-sensitive enhancement and anti-humidity mechanisms were clarified from heterostructure effects and first-principles calculations, respectively. Finally, to achieve accurate NH3 concentration measurement in high humidity environments, a Genetic Algorithm optimized Back Propagation (GA-BP) neural network algorithm was performed to humidity-compensate the sensors. This study provides an effective strategy to explore applications for accurate NH3 detection in high humidity environments.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
SnS 2 /SnS p-n heterojunctions with an accumulation layer for ultrasensitive room-temperature NO 2 detection.

Quan Sun,Jiaxin Wang,Juanyuan Hao,Shengliang Zheng,Peng Wan,Tingting Wang,Haitao Fang,You Wang

DOI: https://doi.org/10.1039/c9nr02780g

IF: 6.7

2019-01-01

Nanoscale

Abstract:The unique features of SnS2 make it a sensitive material ideal for preparing high-performance nitrogen dioxide (NO2) gas sensors. However, sensors based on pristine tin disulfide (SnS2) fail to work at room temperature (RT) owing to their poor intrinsic conductivity and weak adsorptivity toward the target gas, thereby impeding their wide application. Herein, an ultrasensitive and fully recoverable room-temperature NO2 gas sensor based on SnS2/SnS p-n heterojunctions with an accumulation layer was fabricated. The amounts of SnS2/SnS heterojunctions can be effectively controlled by tuning the ratios of tin and sulfur precursors in the easy one-step solvothermal synthesis. Compared with pristine SnS2, the conductivity of SnS2/SnS heterostructures improved considerably. Such improvement was caused by the electron transfer from p-type SnS to n-type SnS2 because the Fermi level of SnS was higher than that of SnS2. The sensing response of optimized SnS2/SnS toward 4 ppm NO2 was 660% at room temperature, which was higher than most reported sensitivity values of other two-dimensional (2D) materials at room temperature. The superior sensing response of SnS2/SnS heterostructures was attributed to the enhanced electron transport and the increased adsorption sites caused by the SnS2/SnS p-n heterojunctions. Moreover, the SnS2/SnS sensor showed good selectivity and long-term stability. These achievements of SnS2/SnS heterostructured sensors make them highly desirable for practical applications.
Heterojunctions of ZnO-Nanorod-Decorated WO 3 Nanosheets Coated with ZIF-71 for Humidity-Independent NO 2 Sensing

Linlin Qian,Canxiang Fang,Yanghai Gui,Kuan Tian,Huishi Guo,Dongjie Guo,Xiang Guo,Peng Liu

DOI: https://doi.org/10.1021/acsanm.3c01955

IF: 6.14

2023-07-08

ACS Applied Nano Materials

Abstract:NO2 is a very dangerous and toxic gas and is prone to cause acid rain in high humidity environments, so it is essential to prepare a real-time monitoring and humidity immunity NO2 sensor. WO3 nanomaterials are commonly applied to detect NO2, but their poor immunity to humidity is still a critical limitation for the application. ZnO-nanorod-decorated WO3 nanosheets coated with ZIF-71 (ZnO@ZIF-71/WO3) composites prepared by an in situ growth method displayed excellent gas sensing performance and good humidity immunity to detect NO2. Compared to WO3 nanosheets and ZnO-nanorod-decorated WO3 nanosheets (ZnO/WO3) heterojunction composites grown on ceramic substrates in situ, ZnO@ZIF-71/WO3 presented excellent selectivity, good long-term stability, and a remarkably high response of about 947.96 to 100 ppm NO2 at 180 °C, which is 3.07 times higher than that of the ZnO/WO3 sensor and 4.59 times higher than that of the pure WO3 sensor. Even at a relative humidity of 85%, the response of ZnO@ZIF-71/WO3 to NO2 remained essentially constant. The functional ZIF-71 layer not only improved the humidity immunity of ZnO@ZIF-71/WO3 but also enhanced the sensitivity and selectivity performance to NO2 at low operating temperatures. The ZnO@ZIF-71/WO3 sensor still provided a response of 88.41 to 100 ppm NO2 at room temperature.

materials science, multidisciplinary,nanoscience & nanotechnology
2D/2D Heterojunction of G-C3n4/sns2: Room-Temperature Sensing Material for Ultrasensitive and Rapid-Recoverable NO2detection

Quan Sun,Juanyuan Hao,Shengliang Zheng,Peng Wan,Jialu Li,Di Zhang,Yanqiu Li,Tingting Wang,You Wang

DOI: https://doi.org/10.1088/1361-6528/aba05b

IF: 3.5

2020-01-01

Nanotechnology

Abstract:Heterojunction engineering plays an indispensable role in improving gas-sensing performance. However, rational heterojunction engineering to achieve room-temperature NO2 sensing with both high response and rapid recovery is still a challenge. Herein, a 2D/2D heterojunction of g-C3N4/SnS2 is designed to improve the sensing performance of SnS2 and used for ultrasensitive and rapid-recoverable NO2 detection at room temperature. The pristine SnS2 fails to work at room temperature because of its high resistivity and weak adsorption to NO2. After combination with g-C3N4 nanosheets, the g-C3N4/SnS2-based sensor exhibits an extremely high response (503%) and short recovery time (166 s) towards 1 ppm NO2 at room temperature. The improved sensing performance is primarily attributed to the increased adsorption sites and enhanced charge transfer induced by the 2D/2D heterojunctions with large interface contact area. This achievement of g-C3N4/SnS2 2D/2D heterostructures demonstrates a promising pathway for the design of sensitive gas-sensing material based on a 2D/2D heterojunction strategy.
Pr2Sn2O7/NiO heterojunction for ultra-fast and low operating temperature to NO2 gas sensing

Hu Zhao,Wanyin Ge,Ye Tian,Pengtao Wang,Xi Li,Zhifu Liu

DOI: https://doi.org/10.1016/j.sna.2022.114100

2023-01-01

Abstract:The performance of NO2 sensors with low operating temperature, high selectivity, and high sensitivity is of importance in the gas sensing field. In this work, porous Pr2Sn2O7/NiO heterojunction was fabricated by solid-state reaction. We analyzed the phase composition, morphology, and chemical composition of Pr2Sn2O7/NiO using X-ray diffraction, scanning electron microscope, chemical element mapping, transmission electron microscope, and X-ray photoelectron spectrometer. The gas sensing result reveals that the Pr2Sn2O7/NiO possesses significantly improved performance toward NO2 than that of Pr2Sn2O7. The fast response time of 2 s and high response value of 27.4 were realized in 250 ppm NO2 at 180 ℃, promoting 17.5 times that in pure Pr2Sn2O7. According to the Hall effect measurement, the carrier type of Pr2Sn2O7/NiO composite is dominated by electrons, so the resistance of Pr2Sn2O7/NiO increases once it is exposed to strong oxidizing gas. The heterojunction and Ni2+ replace Pr3+ reduce the sensor's operating temperature, providing a new strategy for developing a low-energy consumption device. Our work provides new insight into potential development for Pr2Sn2O7/NiO based heterojunction.

engineering, electrical & electronic,instruments & instrumentation
High-Response Room-Temperature NO2 Sensor and Ultrafast Humidity Sensor Based on SnO2 with Rich Oxygen Vacancy.

Yujia Zhong,WeiWei Li,Xuanliang Zhao,Xin Jiang,Shuyuan Lin,Zhen,Wenduo Chen,Dan Xie,Hongwei Zhu

DOI: https://doi.org/10.1021/acsami.9b01737

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:SnO2 nanosheets with abundant vacancies (designated as SnO2- x) have been successfully prepared by annealing SnSe nanosheets in Argon. The transmission electron microscopy results of the prepared SnO2 nanosheets indicated that high-density SnO2- x nanoplates with the size of 5-10 nm were distributed on the surface of amorphous carbon. After annealing, the acquired SnO2- x/amorphous carbon retained the square morphology. The stoichiometric ratio of Sn/O = 1:1.55 confirmed that oxygen vacancies were abundant in SnO2 nanosheets. The prepared SnO2- x exhibited excellent performance of sensing NO2 at room temperature. The response of the SnO2- x-based sensor to 5 ppm NO2 was determined to be 16 with the response time and recovery time of 331 and 1057 s, respectively, which is superior to those of most reported room-temperature NO2 sensors based on SnO2 and other materials. When the humidity varied from 30 to 40%, Δ R/ R was 0.025. The ultrafast humidity response (52 ms) and recovery (140 ms) are competitive compared with other state-of-art humidity sensors. According to the mechanistic study, the excellent sensing performance of SnO2- x is attributed to its special structure.
2D/2D Bi2Se3/SnSe2 heterostructure with rapid NO2 gas detection

Shuangshuang Yi,Cunguang Chen,Meiling Yu,Juanjuan Hao,You Wang

DOI: https://doi.org/10.3389/fchem.2024.1425693

IF: 5.5

2024-07-27

Frontiers in Chemistry

Abstract:Heterostructure engineering is crucial for enhancing gas sensing performance. However, achieving rapid response for room-temperature NO 2 sensing through rational heterostructure design remains a challenge. In this study, a Bi 2 Se 3 /SnSe 2 2D/2D heterostructure was synthesized by hydrothermal method for the rapid detection of NO 2 at room temperature. By combining Bi 2 Se 3 nanosheets with SnSe 2 nanosheets, the Bi 2 Se 3 /SnSe 2 sensor demonstrated and the lowest detection limit for NO 2 a short response time (15 s) to 10 ppm NO 2 at room temperature, reaches 25 ppb. Furthermore the sensor demonstrates significantly larger response to NO 2 than to other interfering gases, including 10 ppm NO 2 , H 2 S, NH 3 , CH 4 , CO, and SO 2 ,demonstrating its outstanding selectivity. And we discuss the mechanism of related performance enhancement.

chemistry, multidisciplinary
Hierarchical SnS2/SnO2 Nanoheterojunctions with Increased Active-Sites and Charge Transfer for Ultrasensitive NO2 Detection.

Juanyuan Hao,Dan Zhang,Quan Sun,Shengliang Zheng,Jianyong Sun,You Wang

DOI: https://doi.org/10.1039/c8nr01379a

IF: 6.7

2018-01-01

Nanoscale

Abstract:SnS2 nanosheets with unique properties are excellent candidate materials for fabricating high-performance NO2 gas sensors. However, serious restacking and aggregation during sensor fabrication have greatly impacted the sensing response. In this study, flower-like hierarchical SnS2 was prepared by a simple microwave method and partially thermally oxidized to form hierarchical SnS2/SnO2 nanocomposites to further improve the sensing performance at low operating temperature. The fabricated SnS2/SnO2 sensor exhibited ultrahigh response (resistance ratio = 51.1) toward 1 ppm NO2 at 100 °C, roughly 10.2 times higher than that of pure SnS2 nanoflowers. The excellent and enhanced NO2 sensing performances of hierarchical SnS2/SnO2 nanocomposites were attributed to the novel hierarchical structure of SnS2 and the nanoheterojunction between SnS2 and the ultrafine SnO2 nanoparticles. The SnS2/SnO2 sensors also exhibited excellent selectivity and reliable repeatability. The simple fabrication of high performance sensing materials may facilitate the large-scale production of NO2 gas sensors.
Humidity-Insensitive NO2 Sensors Based on SnO2/rGO Composites

Yingyi Wang,Lin Liu,Fuqin Sun,Tie Li,Ting Zhang,Sujie Qin

DOI: https://doi.org/10.3389/fchem.2021.681313

IF: 5.5

2021-05-28

Frontiers in Chemistry

Abstract:This study reported a novel humidity-insensitive nitrogen dioxide (NO 2 ) gas sensor based on tin dioxide (SnO 2 )/reduced graphene oxide (rGO) composites through the sol-gel method. The sensor demonstrated ppb-level NO 2 detection in p-type sensing behaviors (13.6% response to 750 ppb). Because of the synergistic effect on SnO 2 /rGO p-n heterojunction, the sensing performance was greatly enhanced compared to that of bare rGO. The limit of detection of sensors was as low as 6.7 ppb under dry air. Moreover, benefited from the formed superhydrophobic structure of the SnO 2 /rGO composites (contact angle: 149.0°), the humidity showed a negligible influence on the dynamic response (S g ) of the sensor to different concentration of NO 2 when increasing the relative humidity (RH) from 0 to 70% at 116°C. The relative conductivity of the sensor to 83% relative humidity was 0.11%. In addition, the response ratio (S g /S RH ) between 750 ppb NO 2 and 83% RH was 649.0, indicating the negligible impaction of high-level ambient humidity on the sensor. The as-fabricated humidity-insensitive gas sensor can promise NO 2 detection in real-world applications such as safety alarm, chemical engineering, and so on.

chemistry, multidisciplinary
Highly sensitive, humidity-tolerant and flexible NO2 sensors based on nanoplate Bi2Se3 film

Yanjie Wang,Cheng Tang,Min Su,Yixiong Ji,Lei Xie,Qi Yang,Aijun Du,Yong Zhou,Jun Yang

DOI: https://doi.org/10.1016/j.cclet.2022.107981

IF: 9.1

2022-11-01

Chinese Chemical Letters

Abstract:Recently, two-dimension (2D) materials have fueled considerable interest in the field of gas sensing to cope urgent demands at specific scenarios. Unfortunately, the susceptibility to ambient humidity, and/or fragile operation stability always frustrate their further practicability. To overcome these drawbacks, we proposed one novel flexible gas sensor based on bismuth selenide (Bi2Se3) nanoplates for sensitive NO2 detection at room temperature. The as-prepared Bi2Se3 sensor exhibited favorable sensing performance, including remarkable NO2 selectivity, high response of 120% and fast response time of 81 s toward 5 ppm NO2, an ultralow detection limit of 100 ppb, and nice stability. Besides, the excellent humidity tolerance and mechanical flexibility endowed Bi2Se3 sensors with admirable reliability under harsh working conditions. The first-principles calculation further revealed the insights of extraordinary NO2 selectivity and the underlying gas-sensing mechanism.

chemistry, multidisciplinary
2D/2D heterojunction of g–C 3 N 4 /SnS 2 : room-temperature sensing material for ultrasensitive and rapid-recoverable NO 2 detection

Quan Sun,Juanyuan Hao,Shengliang Zheng,Peng Wan,Jialu Li,Di Zhang,Yanqiu Li,Tingting Wang,You Wang

DOI: https://doi.org/10.1088/1361-6528/aba05b

IF: 3.5

2020-07-23

Nanotechnology

Abstract:Abstract Heterojunction engineering plays an indispensable role in improving gas-sensing performance. However, rational heterojunction engineering to achieve room-temperature NO 2 sensing with both high response and rapid recovery is still a challenge. Herein, a 2D/2D heterojunction of g–C 3 N 4 /SnS 2 is designed to improve the sensing performance of SnS 2 and used for ultrasensitive and rapid-recoverable NO 2 detection at room temperature. The pristine SnS 2 fails to work at room temperature because of its high resistivity and weak adsorption to NO 2 . After combination with g–C 3 N 4 nanosheets, the g–C 3 N 4 /SnS 2 -based sensor exhibits an extremely high response (503%) and short recovery time (166 s) towards 1 ppm NO 2 at room temperature. The improved sensing performance is primarily attributed to the increased adsorption sites and enhanced charge transfer induced by the 2D/2D heterojunctions with large interface contact area. This achievement of g–C 3 N 4 /SnS 2 2D/2D heterostructures demonstrates a promising pathway for the design of sensitive gas-sensing material based on a 2D/2D heterojunction strategy.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Optoelectronic Gas Sensor Based on Few-Layered InSe Nanosheets for NO2 Detection with Ultrahigh Antihumidity Ability

Lu Zhang,Zhongjun Li,Jiang Liu,Zhengchun Peng,Jia Zhou,Han Zhang,Yingchun Li

DOI: https://doi.org/10.1021/acs.analchem.0c01941

IF: 7.4

2020-01-01

Analytical Chemistry

Abstract:Two-dimensional (2D) transition-metal/metal chalcogenides including MoS2, MoSe2, WS2, SnS2, etc. have shown considerable potential for the fabrication of gas sensors for NO2 detection. However, these sensors usually suffer from sluggish and incomplete recovery at room temperature, and their sensitivities are limited by presorbed O2. In this work, a novel optoelectronic gas sensor based on direct-bandgap InSe nanosheets was demonstrated. Because of the excellent photoelectric and sensing properties in few-layer InSe, detection of NO2 at room temperature was realized. Ultrahigh and reversible responses were obtained under ultraviolet (UV) light illumination, and the limit of detection (0.98 ppb) was ∼40 times lower than that observed without UV light. Furthermore, the effects of O2 and H2O molecules on sensor performance were fully studied through experiments and density functional theory. Some new mechanisms of NO2 detection in high relative humidity conditions under UV illumination were proposed, including regulation of proton transfer and induction of H2O2 reduction. In all, this work not only broadens the application field of 2D InSe, but also demonstrates the potential prospect of detecting ppb-level NO2 in complex circumstances such as human breath by using 2D material-based sensors with light activation.
Dual Improvement in Sensitivity and Humidity Tolerance of a NO 2 Sensor Based on 3-Aminopropyltriethoxysilane Self-Assembled Monolayer-Functionalized SnSe 2 for Explosive Photolysis Gas Detection

Xuezheng Guo,Yijie Shi,Peilin Liu,Yanqiao Ding,Bingsheng Du,Chengyao Liang,Wen Niu,Yiling Tan,Yuhui He,Jiangzhao Chen,Xiangshui Miao,Xi Yang,Yong He

DOI: https://doi.org/10.1021/acsami.3c02782

IF: 9.5

2023-06-02

ACS Applied Materials & Interfaces

Abstract:Explosives can be analyzed for their content by detecting the photolytic gaseous byproducts. However, to prevent electrostatic sparking, explosives are frequently preserved in conditions with low temperatures and high humidity, impeding the performance of gas detection. Thus, it has become a research priority to develop gas sensors that operate at ambient temperature and high humidity levels in the realm of explosive breakdown gas-phase detection. In this work, 3-aminopropyltriethoxysilane...

materials science, multidisciplinary,nanoscience & nanotechnology
Boosting room-temperature NO2 detection via in-situ interfacial engineering on Ag2S/SnS2 heterostructures

Tingting Wang,You Wang,Wenqi Fan,Ruozhen Wu,Qihua Liang,Juanyuan Hao

DOI: https://doi.org/10.1016/j.jhazmat.2022.128782

IF: 13.6

2022-03-01

Journal of Hazardous Materials

Abstract:The effective detection of hazardous gases has become extremely necessary for the ecological environment and public health. Interfacial engineering plays an indispensable role in the development of innovative materials with exceptional properties, thus triggering a new revolution in the realization of high-performance gas sensing. Herein, the rational designed Ag2S/SnS2 heterostructures were synthesized via a facile in-situ cation-exchange method. The coshared S atoms derived from in-situ interfacial engineering enable intimate atomic-level contact and strong electron coupling between SnS2 and Ag2S, which efficiently assist interfacial charge redistribution and transport as confirmed theoretically and experimentally. Benefiting from the high-quality interface of the heterostructures, the resultant Ag2S/SnS2 sensor delivered an ultrahigh response (286%) together with short response/recovery time (17 s/38 s) to 1 ppm NO2. The sensor also demonstrated superior sensing selectivity and reliable repeatability at room-temperature. Such excellent sensing performance could be synergistically ascribed to the junction effect and interfacial engineering of Ag2S/SnS2 heterostructures, which not only modulates the electronic properties of SnS2 but also provides abundant adsorption sites for gas sensing. This study offers guidance for engineering heterostructures with high-quality interface, which might stimulate the exploitation of other novel materials and widen their potential applications.

environmental sciences,engineering, environmental
Ag intercalated SnS2 with S vacancy and expanded interlayer for enhancing NO2 sensing

Huimin Yang,Zhenming Du,Yazhou Yang,Xiang Li,Qirui Wu,Jiahong Tang,Xiaoxia Wang,Dawen Zeng

DOI: https://doi.org/10.1016/j.snb.2023.134140

2023-10-01

Abstract:Nitrogen dioxide (NO2) is a common gas that can cause irreversible damage to human health, emphasizing the essentiality of developing highly sensitive NO2 sensors with good selectivity and low consumption. Here, a facile in–situ cation exchange method was employed to successfully synthesize interlayer expansion Ag intercalated SnS2 with S vacancies for NO2 gas sensing. The presence of S vacancies strongly improves the electronic structure of SnS2 and significantly facilitates the interaction of NO2 with the sensor. Moreover, the interlayer spacing of SnS2 is expanded by 0.48 Å after Ag intercalation, prompting diffusion behavior of NO2 molecules between the interlayers. Benefiting from the factors above, SnS2–Ag exhibited excellent gas sensing performance for NO2 with a high response to 5 ppm NO2 (response value = 8.37) and detection limits as low as 200 ppb at a low temperature of 100 °C. This work combines defect engineering with interlayer engineering to provide a new perspective for extending the application of SnS2 gas sensors.

chemistry, analytical,electrochemistry,instruments & instrumentation
2D SnSe2 nanoflakes decorated with 1D ZnO nanowires for ppb-level NO2 detection at room temperature

Xuezheng Guo,Yanqiao Ding,Xi Yang,Bingsheng Du,Chengjiu Zhao,Chengyao Liang,Yi Ou,Delin Kuang,Zhilin Wu,Yong He

DOI: https://doi.org/10.1016/j.jhazmat.2021.128061

IF: 13.6

2022-03-01

Journal of Hazardous Materials

Abstract:The detection of air pollutant nitrogen dioxide (NO2) is of great importance arising from its great harm to the ecological environment and human health. However, the detection range of most NO2 sensors is ppm-level, and it is still challenging to achieve lower concentration (ppb-level) NO2 detection. Herein, 2D tin diselenide nanoflakes decorated with 1D zinc oxide nanowires (SnSe2/ZnO) heterojunctions were first reported by facile hydrothermal and ultra-sonication methods. The response of the fabricated SnSe2/ZnO sensor enhances 3.41 times on average compared with that of pure SnSe2 sensor to 50-150 ppb NO2 with a high detection sensitivity (22.57 ppm-1) at room temperature. In addition, the SnSe2/ZnO sensor has complete recovery, negligible cross-sensitivity, and small relative standard deviation (6.98%) during the 1 month sensing test, which can meet the requirements for NO2 detection in environmental monitoring. The enhanced NO2 sensing performance can be attributed to the n-n heterojunction constructed between SnSe2 and ZnO. The as-prepared sensor based on SnSe2/ZnO hybrid significantly promotes the development of the low detection limit of the NO2 sensor at room temperature.

environmental sciences,engineering, environmental
TiO2-SnS2 Nanoheterostructures for High-Performance Humidity Sensor

Wencheng Yu,Duo Chen,Jianfei Li,Zhenzhen Zhang

DOI: https://doi.org/10.3390/cryst13030482

IF: 2.7

2023-03-12

Crystals

Abstract:The larger surface-to-volume ratio of the hierarchical nanostructure means it has attracted considerable interest as a prototype gas sensor. Both TiO2 and SnS2 can be used as sensitive materials for humidity sensing with excellent performance. However, TiO2-SnS2 nanocomposites are rarely used in humidity detection. Therefore, in this work, a new humidity sensor was prepared by a simple one-step synthesis process based on nano-heterostructures, and the humidity sensing performance of the device was systematically characterized by much faster response/recovery behavior, better linearity and greater sensitivity compared to pure TiO2 or SnS2 nanofibers. The enhanced sensitivity of the nanoheterostructure should be attributed to its special hierarchical structure and TiO2-SnS2 heterojunction, which ultimately leads to a significant change in resistance upon water molecule exposure. In consideration of its non-complicated, cost-effective fabrication process and environmental friendliness, the TiO2-SnS2 nanoheterostructure is a hopeful candidate for humidity sensor applications.

materials science, multidisciplinary,crystallography
Design of Ag modified Cu@Cu2O/CuO hierarchical heterostructure hybrid for high-performance room temperature NO2 sensing

DOI: https://doi.org/10.1007/s10854-024-12428-4

2024-03-27

Journal of Materials Science Materials in Electronics

Abstract:Room temperature (RT) NO 2 sensing has always been a challenge for metal oxide semiconductor gas sensors. Herein, we report a one-dimensional (1D) hierarchical Ag modified Cu@Cu 2 O/CuO hybrid which is synthesized by low-temperature liquid-phase etching self-assembly method. The Ag nanoparticles are directly modified onto the surface of Cu nanowires (NWs) through simple and efficient substitution reaction, and serve as active centers to improve the gas sensing properties of the hybrid. Subsequently, the Ag–Cu NWs is etched by alkaline solution to form the 1D hierarchical Ag–Cu@Cu 2 O/CuO hybrids at RT. When applied as sensing material, the Ag–Cu@Cu 2 O/CuO exhibits high response of 71.3 to 10 ppm NO 2 with excellent selectivity and fast response/recovery at 25 °C. The nanostructure of the material is characterized systematically and the sensing mechanism is discussed. The synergistic effect of Ag heteroatom and the special morphology as well as the hierarchical Cu 2 O/CuO heterostructure in the Ag–Cu@Cu 2 O/CuO (4 h) hybrid are recognized as the main reason for its excellent NO 2 sensing performance. This work provides a good idea for simple and effective improving the gas sensing properties of metal oxide materials with low power consumption.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied

A Humidity-Tolerant NO2 Sensor Based on Ag3PO4–SnSe2 Heterostructures

SnSe2/Ag2Se Heterostructures with an Accumulation Layer for Rapid and Sensitive Detection of NO2

Ag2Te Nanowires for Humidity-Resistant Trace-Level NO2 Detection at Room Temperature

Ultrasensitive NH3 sensor based on Ag3PO4&nano-Ag co-modified SnS with humidity compensation

SnS 2 /SnS p-n heterojunctions with an accumulation layer for ultrasensitive room-temperature NO 2 detection.

Heterojunctions of ZnO-Nanorod-Decorated WO 3 Nanosheets Coated with ZIF-71 for Humidity-Independent NO 2 Sensing

2D/2D Heterojunction of G-C3n4/sns2: Room-Temperature Sensing Material for Ultrasensitive and Rapid-Recoverable NO2detection

Pr2Sn2O7/NiO heterojunction for ultra-fast and low operating temperature to NO2 gas sensing

High-Response Room-Temperature NO2 Sensor and Ultrafast Humidity Sensor Based on SnO2 with Rich Oxygen Vacancy.

2D/2D Bi2Se3/SnSe2 heterostructure with rapid NO2 gas detection

Hierarchical SnS2/SnO2 Nanoheterojunctions with Increased Active-Sites and Charge Transfer for Ultrasensitive NO2 Detection.

Humidity-Insensitive NO2 Sensors Based on SnO2/rGO Composites

Highly sensitive, humidity-tolerant and flexible NO2 sensors based on nanoplate Bi2Se3 film

2D/2D heterojunction of g–C 3 N 4 /SnS 2 : room-temperature sensing material for ultrasensitive and rapid-recoverable NO 2 detection

Optoelectronic Gas Sensor Based on Few-Layered InSe Nanosheets for NO2 Detection with Ultrahigh Antihumidity Ability

Dual Improvement in Sensitivity and Humidity Tolerance of a NO 2 Sensor Based on 3-Aminopropyltriethoxysilane Self-Assembled Monolayer-Functionalized SnSe 2 for Explosive Photolysis Gas Detection

Boosting room-temperature NO2 detection via in-situ interfacial engineering on Ag2S/SnS2 heterostructures

Ag intercalated SnS2 with S vacancy and expanded interlayer for enhancing NO2 sensing

2D SnSe2 nanoflakes decorated with 1D ZnO nanowires for ppb-level NO2 detection at room temperature

TiO2-SnS2 Nanoheterostructures for High-Performance Humidity Sensor

Design of Ag modified Cu@Cu2O/CuO hierarchical heterostructure hybrid for high-performance room temperature NO2 sensing