Abstract:Heterostructure construction is an effective strategy for enhancing the properties of functional materials. However, the problems of lattice mismatch and weak built-in field in the heterointerface usually degrade the interfacial charge transfer efficiency, severely limiting the improvement of sensing properties for gas sensors. To break through this limitation, we attempted to build a lattice-matched SnS2/SnSe2 in-plane heterostructure as a NO2 gas sensor, for which the capability was revealed by DFT calculations. The SnS2/SnSe2 in-plane heterostructures with atomically sharp interfaces were synthesized by the topotactic anion-exchange method. The content and spatial arrangement of in situ grown SnSe2 can be tuned in the heterostructures by adjusting the Se precursor. Ultrahigh response (1165.2%), sensitivity (322.0% ppm(-1)) and rapid response/recovery (80/78 s) to NO2 (4 ppm) were realized at room temperature for the optimal SnS2/SnSe2 in-plane heterostructure. The response value was 24.7 and 9.5 times higher than that of the common SnS2/SnSe2 heterostructures prepared by mechanical mixing and solvothermal deposition, respectively. The response and recovery times were also improved by a factor of 3.5/8.9 and 1.6/4.9, respectively. The superior sensing properties are attributed to the atomic-level sharp in-plane SnS2/SnSe2 heterointerface with a lateral built-in field that not only improves NO2 adsorption but also boosts the interfacial charge transfer along the 2D plane. The ion-exchange growth of the 2D in-plane heterostructure is expected to expand to other 2D nanomaterial systems for applications in sensors, photoelectronics, and catalysts.

Ag intercalated SnS2 with S vacancy and expanded interlayer for enhancing NO2 sensing

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Boosting room-temperature NO2 detection via in-situ interfacial engineering on Ag2S/SnS2 heterostructures

Synergically Engineering Defect And Interlayer In Sns2 For Enhanced Room-Temperature No2 Sensing

Enhanced NO2 Sensing of SnO2/SnS2 Heterojunction Based Sensor

SnS 2 /SnS p-n heterojunctions with an accumulation layer for ultrasensitive room-temperature NO 2 detection.

Synergistic Effect of Charge Transfer and Interlayer Swelling in V2CTx/SnS2 Driving Ultrafast and Highly Sensitive NO2 Detection at Room Temperature

Ce-Ag Active Bimetallic Pairs in Two-Dimensional SnS2 for Enhancing NO2 Sensing

2D/2D Heterojunction of G-C3n4/sns2: Room-Temperature Sensing Material for Ultrasensitive and Rapid-Recoverable NO2detection

In-situ Construction of SnO2 Nanolayer-Sns2 Nanosheets Heterostructures for Enhanced NO2 Sensing at Room Temperature and Their DFT Investigation

Hierarchical SnS2/SnO2 Nanoheterojunctions with Increased Active-Sites and Charge Transfer for Ultrasensitive NO2 Detection.

High selectivity of sulfur-doped SnO 2 in NO 2 detection at lower operating temperatures.

Synergetic Effect of Highly Active Ce Sites and Interlayer Engineering Induced by Ce Doping of SnS2 to Enhance Gas Sensing of NO2

A lateral built-in field of the 2D/2D SnS2/SnSe2 in-plane heterostructure with boosted interfacial charge transfer

2D/2D heterojunction of g–C 3 N 4 /SnS 2 : room-temperature sensing material for ultrasensitive and rapid-recoverable NO 2 detection

Gas sensors based on SnS 2 /In 2 O 3 for high performance NO 2 detection at room temperature

Controllable synthesis of heterostructured CuO–ZnO microspheres for NO 2 gas sensors

Vacancy–Assisted Exposed Sn Atoms Enhancing NO2 Room Temperature Sensing of SnSe2 Nanoflowers

Flexible, 3D SnS2/Reduced Graphene Oxide Heterostructured NO2 Sensor

g-C3N4 templated synthesis of 3DOM SnO2/CN enriched with oxygen vacancies for superior NO2 gas sensing

Urchin-like Bi2S3 Nanostructures with Rich Sulfur Vacancies for Ppb-Level NO2 Sensing