Abstract:Molybdenum disulfide (MoS2), as a promising gas-sensing material, has gained intense interest because of its large surface-to-volume ratio, air stability, and various active sites for functionalization. However, MoS2-based gas sensors still suffer from low sensitivity, slow response, and weak recovery at room temperature, especially for NO2. Fabrication of heterostructures may be an effective way to modulate the intrinsic electronic properties of MoS2 nanosheets (NSs), thereby achieving high sensitivity and excellent recovery properties. In this work, we design a novel p-n hetero-nanostructure on MoS2 NSs using interface engineering via a simple wet chemical method. After surface modification with zinc oxide nanoparticles (ZnO NPs), the MoS2/ZnO hetero-nanostructure is endowed with an excellent response (5 ppm nitrogen dioxide, 3050%), which is 11 times greater than that of pure MoS2 NSs. To the best of our knowledge, such a response value is much higher than the response values reported for MoS2 gas sensors. Moreover, the fabricated hetero-nanostructure also improves recoverability to more than 90%, which is rare for room-temperature gas sensors. Our optimal sensor also possesses the characteristics of an ultrafast response time of 40 s, a reliable long-term stability within 10 weeks, an excellent selectivity, and a low detection concentration of 50 ppb. The enhanced sensing performances of the MoS2/ZnO hetero-nanostructure can be ascribed to unique 2D/0D hetero-nanostructures, synergistic effects, and p-n heterojunctions between ZnO NPs and MoS2 NSs. Such achievements of MoS2/ZnO hetero-nanostructure sensors imply that it is possible to use this novel nanostructure in ultrasensitive sensor applications.

Design of Ag modified Cu@Cu2O/CuO hierarchical heterostructure hybrid for high-performance room temperature NO2 sensing

Photochemical Fabrication of Ag‐Modified Hierarchical Cu@Cu2O/CuO Nanocomposite Toward Room Temperature NO2 Detection

Designing One-Dimensional Hierarchical Cu@Cu2O/CuO Core-Shell Heterostructure for Highly Sensitive Detection of NO2 at Room Temperature

Cu-MOF-Derived C-Doped CuO/Cu2O Hollow Nano-Octahedrons for Room-Temperature NO2 Sensing at the Ppb Level

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

Construction of organic-inorganic “chelate” adsorption sites on metal oxide semiconductor for room temperature NO2 sensing

Cu2O and Rgo Hybridizing for Enhancement of Low-Concentration NO2 Sensing at Room Temperature

Controllable synthesis of heterostructured CuO–ZnO microspheres for NO 2 gas sensors

An ultrasensitive NO2 gas sensor based on a hierarchical Cu2O/CuO mesocrystal nanoflower

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Gas-sensitive performance of metal-organic framework-derived CuO NPs/Ti3C2TX MXene heterostructures for efficient NO2 detection at room temperature

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection

An Ultrasensitive NO2 Gas Sensor Based on a NiO-SnO2 Composite with a Sub-ppb Detection Limit at Room Temperature

Boosting room-temperature NO2 detection via in-situ interfacial engineering on Ag2S/SnS2 heterostructures

Construction of Cu2O@Cu1.75S Core‐Shell Octahedrons for Enhanced NO2 Gas Sensing at Low Temperature

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

Three-Dimensional Fe3O4@Reduced Graphene Oxide Heterojunctions for High-Performance Room-Temperature NO2 Sensors

Design of Hetero-Nanostructures on MoS 2 Nanosheets To Boost NO 2 Room-Temperature Sensing.

Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Porous Co3O4 Nanocrystals Derived by Metal-Organic Frameworks on Reduced Graphene Oxide for Efficient Room-Temperature NO2 Sensing Properties