Abstract:Nitrogen dioxide (NO2) is a highly dangerous gas, mostly emitting emitted from fossil fuels, and a major contributor to air pollution. It has negatively effects affects on the human health as well asand contributes to environmental issues like acid rain. In this study, mesoporous CuOx nanoparticles (NPs) were successfully synthesized using a low-temperature inverse micelle sol–gel method. Subsequently, the synthesized NPs were annealed at temperatures of 250, 350, and 450 °C. Advanced characterization of the synthesized samples revealed that upon with increasing the annealing temperature, the sizes of the NPs increased, whileereas their surface areas decreased. The sample annealed at 250°C showed a remarkably higher surface area (161.85 m2/g) compared with the samples annealed at 350 °C (39.88 m2/g) and 450 °C (22.52 m2/g) thanks to finer particle sizes and a mesoporous nature. Resistive gas sensors incorporating these samples were successfully fabricated and tested for sensitivity towards both NO2 (oxidizing gas) and H2S (reducing gas) at 200 °C. The sensor with the mesoporous CuOx NPs annealed at the lowest temperature (250 °C) exhibited an enhanced response to NO2 gas but no response to H2S. The strong response to NO2 gas is considered to be due to the high surface area of the sensing layer which provides plenty of adsorption sites for gas molecules and the oxidizing nature of NO2 gas with high affinity to electrons. These findings highlight the effectiveness of the inverse micelle sol–gel method forin synthesizing mesoporous CuOx NPs for gas sensing, as well as the need for to optimizing optimize the annealing temperature to maximize the sensor response.

Construction of Cu 2 O@Cu 1.75 S Core‐Shell Octahedrons for Enhanced NO 2 Gas Sensing at Low Temperature

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

Controllable synthesis of heterostructured CuO–ZnO microspheres for NO 2 gas sensors

Design of Ag modified Cu@Cu2O/CuO hierarchical heterostructure hybrid for high-performance room temperature NO2 sensing

Enhanced NO2 sensing performance of ZnO@ZnS core-shell structure fabricated using a solution chemical method

Facile solvothermal synthesis of ZnO/Ti3C2Tx MXene nanocomposites for NO2 detection at low working temperature

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Cu3N-derived hydrophobic porous CuO hollow nanospheres for NO2 detection at room temperature

Simple synthesis of hydrangea-like CuO structure constructed by porous nanosheets for rapid detection of NO 2 at low temperature

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Photochemical Fabrication of Ag‐Modified Hierarchical Cu@Cu2O/CuO Nanocomposite Toward Room Temperature NO2 Detection

Gas-sensitive performance of metal-organic framework-derived CuO NPs/Ti3C2TX MXene heterostructures for efficient NO2 detection at room temperature

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

N-doped three-dimensional needle-like CoS2 bridge connection Co3O4 core–shell structure as high-efficiency room temperature NO2 gas sensor

Improved NO2 Sensing Performance of Ternary Nanocomposites Based on Au-doped Co3O4/CuO

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

A Room-Temperature NO2 Gas Sensor Based on CuO Nanoflakes Modified with Rgo Nanosheets

Synthesis of Mesoporous CuOx Using Inverse Micelle Sol–gel Process for NO2 Gas Sensing