Abstract:Conventional gas-sensing materials for detecting trace NO2 gas are suffering from limitations such as low selectivity, high operation temperature and an agglomerated tendency during synthesis. In this work, uniform CuO nanoflakes modified with rGO nanosheets (CuO/rGO) were synthesized via an ultra-low-cost hydrothermal process with a thermal treatment. The gas sensor based on the as-synthesized CuO/rGO was fabricated by spincoated method and applied to detect ppb-level NO2 gas at room temperature (23?C). Remarkably, the CuO/rGObased sensor maintained an ultrahigh response behavior of approximately 400.8 % towards 5 ppm NO2 gas with ultrafast response time of 6.8 s at 23?C, and the limit of detection was down to 50 ppb (S = 20.6 %). In addition, the gas sensor had outstanding consistency, reliable repeatability, and long-term stability (30 days). The improved gas-sensing response was attributed to the synergetic effects of CuO and rGO. Specifically, the porous flake-like nanostructures of CuO and high surface areas of CuO/rGO may provide additional active adsorption sites for NO2 gas and accelerate the redox reaction on the surface of CuO/rGO, leading to the ultrahigh response. On the other hand, the rGO nanosheets with excellent transport capability may serve as highly conductive channels to accelerate carrier transfer, which dramatically reduced the response and recovery time. Furthermore, abundant surface defects of CuO/rGO were also conducive to surface reactions in the gas-sensing process. Undoubtedly, the scientific study of the present work will promote potential applications of ppb-level NO2 detection at room temperature.

Simple synthesis of hydrangea-like CuO structure constructed by porous nanosheets for rapid detection of NO 2 at low temperature

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

Designing One-Dimensional Hierarchical Cu@Cu2O/CuO Core-Shell Heterostructure for Highly Sensitive Detection of NO2 at Room Temperature

One-pot low-energy synthesis of rGO-CuO hybrid for detection of NO2 at room temperature

Ultrathin In2O3 Nanosheets with Uniform Mesopores for Highly Sensitive Nitric Oxide Detection.

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Simple Synthesis of Cu/Cu2O/CuO Composites with Dual Adsorption Capacity for Conductometric NO2 Detection

Cu3N-derived hydrophobic porous CuO hollow nanospheres for NO2 detection at room temperature

A Room-Temperature NO2 Gas Sensor Based on CuO Nanoflakes Modified with Rgo Nanosheets

Controllable synthesis of heterostructured CuO–ZnO microspheres for NO 2 gas sensors

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Highly sensitive and selective NO<sub>2</sub> gas sensor fabricated from Cu<sub>2</sub>O-CuO microflowers

Nitrogen Dioxide Sensing Based on Multiple-Morphology Cuprous Oxide Mixed Structures Anchored on Reduced Graphene Oxide Nanosheets at Room Temperature

Cu2O and Rgo Hybridizing for Enhancement of Low-Concentration NO2 Sensing at Room Temperature

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

Mesoporous ZnO: In nanosheets grown on g-C3N4 for improved detection of NO2

Synthesis of Cu2O-Modified Reduced Graphene Oxide for NO2 Sensors

Facile solvothermal synthesis of ZnO/Ti3C2Tx MXene nanocomposites for NO2 detection at low working temperature

Zno Nanoarrays Via A Thermal Decomposition-Deposition Method For Sensitive And Selective No2 Detection

Direct Synthesis of Upstanding Graphene/ZnO Nanowalls/Graphene Sandwich Heterojunction and Its Application for NO2 Gas Sensor

Cu2o Quantum Dots Modified by Rgo Nanosheets for Ultrasensitive and Selective No2 Gas Detection