Abstract:Laser autocollimation is innovated for absolute angular position measurement based on an optical frequency comb. The conventional laser autocollimation can only make relative angle measurement due to the unknown angular distance between the incident laser beam and the axis of the autocollimation unit. In the proposed absolute laser autocollimation employed with the femtosecond laser autocollimator, in which a femtosecond laser and a diffraction grating are employed as the measurement light source and the reflector, respectively, a new method is proposed for accurate identification of the angular distance through taking use of first-order diffracted beams from the reflector associated with the optical frequency comb of the femtosecond laser source. With the identified angular distance, the absolute angular position of the grating reflector, which is defined by the angle between the normal axis of the reflector surface and the incident laser beam, can be determined from the information of optical frequencies of the first-order diffracted beams based on the fact that each of the first-order diffracted beams from the grating reflector has a deterministic angular position corresponding to the optical frequency of each comb mode of the femtosecond laser. Principle of the proposed absolute laser autocollimation and an experimental setup as well as experimental results demonstrating the effectiveness and potentiality of the proposed method are presented.

Three-degree-of-freedom autocollimation angle measurement method based on crosshair displacement and rotation.

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Roll angle measurement based on common path compensation principle

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Three-Dimensional Small Angle Measurement System Based on Autocollimation Method.

Three-degree-of-freedom autocollimator with large angle-measurement range

Laser autocollimation based on an optical frequency comb for absolute angular position measurement

Precision Roll Angle Measurement System Basedon Autocollimation

Optical Frequency Domain Angle Measurement in a Femtosecond Laser Autocollimator.

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

Two-dimension automatic tracking vision autocollimator system

2D Micro-Angle Sensor Based on Laser Autocollimation

An optical method based auto-collimation for measuring five degrees of freedom error motions of rotary axis

A compact 2D micro-angle sensor

A Novel Enhanced Roll-Angle Measurement System Based on a Transmission Grating Autocollimator

Drift compensation system of an autocollimator based on reciprocal roll angles and a feedback combination target