High Intermediate Precision Sm Isotope Measurements in Geological Samples by MC-ICP-MS

Jiang-Hao Bai,Mang Lin,Song-Xiong Zhong,Yi-Nan Deng,Le Zhang,Kai Luo,Hao Wu,Jin-Long Ma,Gang-Jian Wei

DOI: https://doi.org/10.1039/d2ja00412g

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:A protocol for high intermediate precision Sm isotope measurements.

What problem does this paper attempt to address?

High-precision Double-Spike Sn Isotope Analysis of Geological Materials by MC-ICP-MS

Jia-Xin She,Weiqiang Li,Shichao An,Yuanfeng Cai

DOI: https://doi.org/10.1039/d2ja00339b

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:This study proposes a new robust protocol for stable Sn isotope measurements using the double-spike method in geological reference materials with a range of sample matrices.
High-precision measurement of Ag isotopes for silicate rocks by MC-ICP-MS

Yuan Fang,Qiu-Yu Wen,Zi-Cong Xiao,Hui-Min Yu,Fang Huang

DOI: https://doi.org/10.1039/d3ja00424d

2024-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Silver (Ag) isotopes can be a useful geochemical and environmental tracer, but its applications are hindered by the challenges of Ag isotope analyses, especially for samples with extremely high matrix...

spectroscopy,chemistry, analytical
Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

Yan Hu,Fang-Zhen Teng

DOI: https://doi.org/10.1039/c8ja00335a

2019-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Analytical advances in Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) over the past decade have led to rapid growth in studies utilizing non-traditional stable isotopes. There are substantial analytical challenges for achieving precise and accurate measurements of these isotopes that limit their applications in geoscience where natural isotopic variations are generally small. Here, we evaluate experimental factors that may affect the accuracy and repeatability of isotopic measurements of selected stable metal isotopes (Li, Mg, Fe, Cu, and Zn) on a Nu Plasma II MC-ICPMS to provide optimized analytical protocols for acquiring high quality data. Our results suggest that the repeatability level (2SD) that is readily obtainable for delta Li-7 is +/- 0.09 parts per thousand to +/- 0.24 parts per thousand, for delta Mg-26 is +/- 0.03 parts per thousand to +/- 0.07 parts per thousand, for delta Fe-56 is +/- 0.05 parts per thousand to +/- 0.07 parts per thousand, for delta Cu-65 is +/- 0.03 parts per thousand to +/- 0.05 parts per thousand, and for delta Zn-66 is +/- 0.02 parts per thousand to +/- 0.04 parts per thousand. Instrumental mass bias for these isotope systems can be corrected adequately using the standard-sample bracketing method but it requires that target elements are of high purity, a close match in analyte concentrations between samples and bracketing standards, and preparation of all running solutions using the same concentration of nitric acid. Overall, the Nu Plasma II is well suited for precise and accurate analyses of the isotopes studied here, and the optimal results were obtained using a 'wet' plasma operating at a normal radio-frequency (RF) power.
High-sensitivity determination of Cd isotopes in low-Cd geological samples by double spike MC-ICP-MS

Decan Tan,Jian-Ming Zhu,Xiangli Wang,Guilin Han,Zhuo Lu,Wenpo Xu

DOI: https://doi.org/10.1039/c9ja00397e

2020-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The accuracy and precision of Cd isotope measurement at different injecting sample sizes.

spectroscopy,chemistry, analytical
Applying standard addition to determine antimony isotopes in low-Sb samples using HG-MC-ICP-MS

HongGang Zhu,Jian-Ming Zhu,Decan Tan,Zhuo Lu,Hongfei Liao,Yiwei Ma

DOI: https://doi.org/10.1039/d4ja00333k

2024-11-04

Journal of Analytical Atomic Spectrometry

Abstract:The standard addition method (SA) has been successfully employed in measuring metal-stable isotopes in recent years. Here, utilizing hydride generation (HG)-multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS, Nu Plasma II and Neptune Plus), we evaluated the method's robustness through achieving the high-precision δ 123 Sb(antimony) values (relative to NIST 3102a) in samples with more complex matrices and low-Sb concentrations. By using element doping ( 113/111 cadmium) coupled with sample-standard bracketing (SSB), a mass discrimination correction model was presented. The Sb isotope ratios of 30 geological reference materials (GRMs) were reported, in which the selected GRMs agreed well with previously published values. The SA method was then used to determine four of these with low-Sb samples. The analytical precision (2 standard deviations: 2SD) was found to mainly depend on the sample fraction(fspl) in SA, with the ideal mixing range recommended to be f spl ≥ 0.5 for single- and ≥0.45 for double SA when expected precision is ≤ 0.09‰ (2SD). The δ 123 Sb ratio calculated for basalt BCR-2 (Sb = 0.30 μg g -1 ) was 0.28 ± 0.09‰, and together with other four GRMs, confirmed that the accurate and precise Sb isotopes can be analyzed for samples with low-Sb samples using SA. Validating the measurement of Sb isotope composition in low-Sb samples with complex matrices by SA will expand the application of Sb isotopes in environmental, agricultural, life, Earth, and Planetary sciences.

spectroscopy,chemistry, analytical
High precision cadmium isotope analysis of geological reference materials by double spike MC-ICP-MS

Huan Peng,Dong He,Rui Guo,Xing Liu,Nicholas S. Belshaw,Hongtao Zheng,Shenghong Hu,Zhenli Zhu

DOI: https://doi.org/10.1039/d0ja00424c

2021-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The effect of the DS ratio is evaluated and a correction approach is proposed to improve the accuracy and robustness of the proposed DS Cd isotope analysis.

spectroscopy,chemistry, analytical
A simplified instrumental protocol for trace Nd and Hf isotope measurements (<10 ng) using a MC-ICP-MS and an Apex Omega de-solvating system

Ting Zhou,Liang Qi,shenghua Liu,bo Zhou,Sheng-hua Liu,Bo Zhou

DOI: https://doi.org/10.1039/d4ja00276h

2024-10-01

Journal of Analytical Atomic Spectrometry

Abstract:We reported a simple technique allowing accurate and precise Nd and Hf isotope measurements of samples with low contents using a Neptune Plus MC-ICP-MS and an Apex Omega membrane de-solvating system. By employing a highly sensitive jet sample cone and X skimmer cone, our protocol achieved a low oxide level (<0.05%) at high ion transmission (∼880 V ppm −1 for Nd and 850 V ppm −1 for Hf) and was found to have little effect on the mass fractionation of Nd and Hf. This was accomplished by simple adjustments of the sweep gas of the membrane de-solvating system and the sample gas of the nebulizer. Instrumental sensitivities were enhanced by a factor exceeding tenfold, in comparison to those of standard measurements with wet plasma. Long term measurements of 1 ng Nd solution standards yielded 143 Nd/ 144 Nd ratios of 0.512117 ± 0.000032 (2SD, n = 24) and 0.512227 ± 0.000036 (2SD, n = 42) for Jndi-1 and JMC-Nd solutions, respectively, while analysis of 1 ng JMC475 Hf gave 176 Hf/ 177 Hf ratios of 0.282163 ± 0.000027 (2SD, n = 21). These results are in agreements with their reference values. Potential interfering elements Ce and Sm are found to have an insignificant influence on 143 Nd/ 144 Nd ratios. Lu and Yb have a remarkable effect on 176 Hf/ 177 Hf ratios. Improved correction performance can be achieved by using Lu and Yb ratios obtained by analyzing pure Lu and Yb solutions. Five chemically purified rock reference materials are measured with the presented method and the results are consistent with their recommended values. Relative to other approaches, this protocol is rapid and accurate and can be widely applied in Nd and Hf isotope analysis of samples with trace amounts of Nd and Hf (<10 ng).

spectroscopy,chemistry, analytical
An Efficient Li Dual-Column System and High-Precision Li Isotope Measurement of High Matrix and Low-Li Samples by MC-ICP-MS

Cheng Cao,Tao Li,Tianyu Chen,Gaojun Li,Wei Li,Jun Chen

DOI: https://doi.org/10.1039/d3ja00054k

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Over the last decade, there has been a growing interest in using lithium (Li) isotopes in marine carbonates to trace chemical weathering and clay formation in the Earth's history. Yet it remains technically challenging to precisely and efficiently determine the Li isotope composition in carbonate samples due to the imperfect Li separation led by the matrix effect and the extremely low Li concentration in carbonates relative to the analytical threshold of sample size. For such high matrix and low-Li samples, here we present an efficient dual-column chromatography system for Li purification. The dual-column system has a large loading capacity, fixed Li elution range of merely 12 mL, complete Li recovery (>99.5%) and relatively efficient total elution time (7 hours). The procedural blank is 0.036 & PLUSMN; 0.002 ng accounting for sample dissolution and chemical purification, and the Na/Li mass ratio of the Li cut is below 0.5. High precision and accurate Li isotope measurement is performed efficiently with a small sample-sized protocol developed on a MC-ICP-MS (Neptune plus) connected with an APEX 2-IR desolvator. The whole procedure is validated by analyzing a series of certified reference materials. The long-term external precision of & delta;Li-7 determined based on L-SVEC and a high-purity Li solution is 0.6 & PTSTHOUSND; (2SD) and 0.9 & PTSTHOUSND; (2SD) for a minimum sample size of 7.5 ng.
High precision potassium isotope analysis of geological samples using MC-ICP-MS

CHEN Yaqi,SUN He,GU Haiou,HUANG Chao,CAO Ziyi,WANG Fangyue,GE Can

DOI: https://doi.org/10.19762/j.cnki.dizhixuebao.2022032

2023-01-01

Acta Geologica Sinica

Abstract:In recent years, with the rapid development of multi-collector inductively coupled plasma-mass spectrometry（MC-ICP-MS）, the analytical precision of potassium（K） isotopes has been greatly improved, which in turn has promoted their development as potential geochemical tracers in processes involving continental weathering, crust-mantle interaction, and so on. Until now, the cumbersome and time-consuming process of sample pretreatments and the poor analytical accuracy caused by argon hydrides interference are still the biggest obstacles to the wide application of K isotopes. After completely dissolving the samples with hydrochloric acid, nitric acid, and hydrofluoric acid, purification of K from major matrix was performed on a customized quartz ion exchange column packed with ～2.7 mL of AG50W-X8 cation exchange resin（BioRad TM,200～400 mesh） using 0.5 mol/L HNO 3 as the eluent. This one-step procedure can effectively separate K from Li, Na, Ti, Mg, Mn, Al and Ca, except for Cr, in most of the geological samples. To find the appropriate method for high-precision stable K isotopic measurements, for minimizing the ArH + yield and improving the stability of the instrument, three methods were compared here（the high-resolution mode, high-resolution mode with continuous acquisition measurement run mode, and the low-resolution mode with a method designed to eliminate ArH + interference）. The low-resolution mode has the advantages of low cost, high stability, and high precision（long-term precision at about 0.08‰ for our laboratory）. When used to measure the K isotopic composition of a series of international geological reference materials, the results are consistent with previous values within analytical precision, indicating the reliability of this method. The K isotopic composition of a set of Chinese national rock standard materials is determined here. The measured values of K isotopes can provide a reference for the data comparison between different laboratories in future.
Precise/small sample size determination of stable Cd isotope ratios of geological samples with double spike MC-ICP-MS

Chao Guo,Tao Li,Gaojun Li,Tianyu Chen,Le Li,Liang Zhao,Junfeng Ji

DOI: https://doi.org/10.1039/d2ja00250g

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The precise determination of Cd isotope ratios via multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) has made the widespread application of Cd isotopes possible. However, previous studies are complicated by the chemical purification method and molecular interferences from Zn (e.g.(ZnAr+)-Zn-70-Ar-36, (ZnAr+)-Zn-68-Ar-38, and (ZnAr+)-Zn-66-Ar-40 on Cd-106(+), (ZnAr+)-Zn-70-Ar-38 and (ZnAr+)-Zn-68-Ar-40 on Cd-108(+), (ZnAr+)-Zn-70-Ar-40 on Cd-110(+)). Separation of Zn from Cd requires the usage of a toxic reagent (HBr) and is also complicated by the relatively high procedural Zn blank especially when only a very small amount of Cd is available. Here we present a high-precision Cd isotope measurement method using double spike MC-ICP-MS, which avoids the molecular interferences from Zn introduced by both sample and chemical purification. A Cd-111-Cd-113 double spike pair optimized for the Cd-111, Cd-112, Cd-113, and Cd-114 inversion was used to correct for the mass bias. Elemental doping experiments suggest that the measured Cd isotope data were not significantly affected when the measured solution has, Zn/Cd < 10(3), Pd/Cd < 10(2), Fe/Cd < 10(-2), In/Cd < 10(-3), Sn/Cd < 10(-1), Zr/Cd < 10(-2), Nb/Cd < 10(-1), Mo/Cd < 10(-2), Ru/Cd < 10(-2), Ga/Cd < 10(-2), Ge/Cd < 10(-2), Se/Cd < 10(-1), and As/Cd < 10(-1). We thus modified the chemical purification method by removing the HBr step and eluting Zn and Cd together. The minimum requirement of sample size for precise measurement of stable Cd isotope ratios was tested to be as low as 10 ng. The measurements of pure Cd solutions (BAM I012 Cd and HPS Cd) give a long-term intermediate precision for delta Cd-114/110 relative to NIST SRM 3108 of 0.05 parts per thousand. We further validated our method by measuring different reference materials covering a relatively wide range of Zn/Cd (similar to 9 to 1239), the results of which agree within uncertainty with previous studies. Our study thus provides an efficient and precise way to determine stable Cd isotope ratios of geological samples with relatively low Cd concentrations.
High-precision Mg isotope analyses of low-Mg rocks by MC-ICP-MS

Yajun An,Fei Wu,Yuanxin Xiang,Xiaoyun Nan,Xun Yu,Jinhui Yang,Huimin Yu,Liewen Xie,Fang Huang

DOI: https://doi.org/10.1016/j.chemgeo.2014.09.014

IF: 3.9

2014-01-01

Chemical Geology

Abstract:We present a method for precise measurement of Mg isotope ratios for low-Mg rock samples (where MgO <1wt.%) by multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). The efficiency of Mg purification is significantly improved by using a newly calibrated HNO3+HF step to remove undesired matrix elements (such as Ti, Al, Fe, and K) in low-Mg samples. We also establish that increasing the amount of Mg loaded to the chromatographic column minimized blank effects of organics leached from cation resin. All parameters that could affect the accuracy and precision of Mg isotope analyses were rigorously examined by two independent laboratories in Beijing and Hefei. The δ26Mg of mono-elemental Mg standard CAM-1 measured in the two laboratories were −2.597±0.042‰ (2σ, n=49) and −2.598±0.039‰ (2σ, n=79), respectively; in house standard IGGMg1 were −1.742±0.041‰ (2σ, n=53) and −1.749±0.049‰ (2σ, n=72), respectively. The average δ26Mg over ten months of two synthetic standards, made by doping IGGMg1 and IGGMg2 with matrix elements, agrees well with their recommended values, within error. The robustness of our method was further assessed by replicated analyses of sixteen rock standards with MgO contents from 0.28wt.% to 49.4wt.%. The δ26Mg of USGS rhyolite standards RGM-1 and RGM-2 are −0.188±0.031‰ (2σ, n=35) and −0.182±0.041‰ (2σ, n=72), respectively; granite standard GA is −0.165±0.038‰ (2σ, n=57), G-2 is −0.129±0.045‰ (2σ, n=34), GS-N is −0.204±0.059‰ (2σ, n=33), GSP-2 is 0.042±0.020‰ (2σ, n=15), and GSR-1 is −0.234±0.016‰ (2σ, n=17). Based on repeated analyses of standards, the long-term external precision of our method is better than ±0.05‰ for δ26Mg. This precision allows us to distinguish the fractionation of Mg isotopes in low-Mg granites and rhyolites as well as that between mantle minerals.
High Precision Isotope Ratio Measurements of Mercury Isotopes in Cinnabar Ores Using Multi-Collector Inductively Coupled Plasma Mass Spectrometry

H Hintelmann,SY Lu

DOI: https://doi.org/10.1039/b300451a

2003-01-01

Abstract:Variations in Hg isotope ratios in cinnabar ores obtained from different countries were detected by high precision isotope ratio measurements using multi-collector inductively coupled mass spectrometry (MC-ICP- MS). Values of delta(198/202)Hg varied from 0.0 - 1.3parts per thousand relative to a NIST SRM 1641d Hg solution. The typical external uncertainty of the delta values was 0.06 to 0.26parts per thousand. Hg was introduced into the plasma as elemental Hg after reduction by sodium borohydride. A significant fractionation of lead isotopes was observed during the simultaneous generation of lead hydride, preventing normalization of the Hg isotope ratios using the measured (208/206)Pb ratio. Hg ratios were instead corrected employing the simultaneously measured (205/203)Tl ratio. Using a 10 ng ml(-1) Hg solution and 10 min of sampling, introducing 60 ng of Hg, the internal precision of the isotope ratio measurements was as low as 14 ppm. Absolute Hg ratios deviated from the representative IUPAC values by approximately 0.2% per u. This observation is explained by the inadequacy of the exponential law to correct for mass bias in MC-ICP- MS measurements. In the absence of a precisely characterized Hg isotope ratio standard, we were not able to determine unambiguously the absolute Hg ratios of the ore samples, highlighting the urgent need for certified standard materials.
An optimal separation method for high-precision K isotope analysis by using MC-ICP-MS with a dummy bucket

Xiaoqiang Li,Guilin Han,Qian Zhang,Zhuang Miao

DOI: https://doi.org/10.1039/d0ja00127a

2020-01-01

Journal of Analytical Atomic Spectrometry

Abstract:High-precision potassium isotope analysis by MC-ICP-MS: a novel chromatographic method (single column) and cross-disciplinary research.

spectroscopy,chemistry, analytical
High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

Hai-Ou Gu,Xiya Liu,He Sun,Guochao Sun,Dongyong Li,Fangyue Wang,Can Ge,Yu Fan,Taofa Zhou

DOI: https://doi.org/10.1021/acs.analchem.3c04823

IF: 7.4

2024-01-01

Analytical Chemistry

Abstract:Herein, we present a new method for determining the Ca isotopic composition of geological samples. To eliminate matrix elements from Ca, a column chromatography method was developed using a N,N,N'N' tetraoctyl-1,5-diglycolamide (TODGA) resin. The Ca isotopic compositions were measured by a multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) without collision cell equipment, especially that direct measurement to 44Ca/40Ca can be achieved. To mitigate the interference from 40Ar during 40Ca measurement, the cold plasma technique was used to suppress the Ar+ generation, resulting in a background Ar+ intensity of <300 mV, in contrast to the conventional hot plasma conditions, which typically yield thousands of volts for Ar+ intensities. Given the potential for a concentration mismatch between the sample and bracketed standard solutions to cause an intensive shift in measured Ca isotopic compositions, a correction for the [Ca] match is needed. To avoid matrix effects arising from residue matrix elements, it is crucial to limit the concentrations below 1% of Ca for most matrix elements (including Al, Mg, K, Na, and Sr) and below 1‰ for Fe. Notably, the tolerance of residue Sr is effectively improved compared to measurements with CC-MC-ICP-MS and traditional Hot-plasma-SSB-MC-ICP-MS methods with the conventional hot plasma technique, thereby lowering the complexity of column chemistry. The measured δ44/40Ca, δ44/42Ca, and ε40Ca values for eight reference materials agree well with previously reported values within analytical uncertainties. This method demonstrates long-term precision is better than 0.10‰ (two standard deviations) for both δ values (i.e., δ44/40Ca and δ44/42Ca). We anticipate that the proposed method will benefit the growth of the Ca isotope data set and foster an increase in the application of Ca isotope in Earth science studies.
High Precision Hg Isotope Analysis of Environmental Samples Using Gold Trap-Mc-Icp-Ms

QL Xie,SY Lu,D Evans,P Dillon,H Hintelmann

DOI: https://doi.org/10.1039/b418258h

2005-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Precise and accurate analysis of Hg isotope compositions in environmental samples can be an invaluable tool in investigating Hg cycles in the environment. We have developed a method for high precision Hg isotope analysis using a gold trap sample introduction system coupled to a Thermo Finnigan MC-ICP-MS. Environmental samples were pyrolyzed at high temperature and Hg released from the samples was collected in gold traps. The Hg on the gold traps was then thermally released into a sample introduction system coupled to an MC-ICP-MS. The sample introduction system extended the Hg signal duration, which would otherwise be a short transient signal if released directly into the plasma, thus significantly improving the precision and accuracy of Hg isotope measurement. Instrumental mass bias was corrected using a Tl internal isotopic standard and a “standard–sample–standard” bracketing technique. Based on the long term measurement of NIST-2225 elemental Hg standard, the external precision ranges from 44 to 109 ppm for 201Hg/202Hg and 199Hg/202Hg ratios, respectively. The average mass bias corrected Hg isotope ratios for NIST-2225 are: 198Hg/202Hg = 0.335948 ± 87 (2σ), 199Hg/202Hg = 0.567423 ± 109, 200Hg/202Hg = 0.776552 ± 93, and 201Hg/202Hg = 0.443 085 ± 44. These ratios agree within error with the IUPAC values issued in 1983, but differ significantly from the IUPAC values issued in 1997. Our data suggest that there are significant Hg isotope variations among different environmental samples. Specifically, organic samples containing predominantly methylmercury appear to be enriched in light isotopes compared with samples with inorganic Hg, suggesting that biomethylation may play an important role in Hg isotope fractionation in the environment.
<i>In situ</i> Hf isotope analysis of cassiterite by LA-MC-ICP-MS: protocol and applications

Ming Yang,Yue-Heng Yang,Rolf L. Romer,Shi-Tou Wu,Tao Wu,Hao Wang

DOI: https://doi.org/10.1039/d2ja00340f

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:We report the laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) Hf-176/Hf-177 ratios for cassiterite of a known age and demonstrate that the Hf-176/Hf-177 ratios can be measured accurately and reproducibly with adequate precision for cassiterite with Hf contents around 100 mu g g(-1). Although cassiterite only has minor rare earth elements (REEs), corrections for Yb and Lu interferences are required as they may affect the determination of the Hf-176/Hf-177 ratios. Among the investigated samples, Rond-A has a homogeneous Hf isotopic composition. We recommend cassiterite sample Rond-A as a primary reference material for in situ Hf isotope analysis. The Kard sample has a homogeneous Hf isotopic composition and is suitable as a primary reference material once its Hf isotopic composition has been confirmed by solution-based MC-ICP-MS. Samples BB#7, 19MP, and 19GX showed minor variations in their Hf isotopic compositions and, therefore, can only be used as secondary reference materials.
High-Precision Measurements of 44 Ca/ 40 Ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry without Collision-Cell Technology

Hai-Ou Gu,Xiya Liu,He Sun,Guochao Sun,Dongyong Li,Fangyue Wang,Can Ge,Yu Fan,Taofa Zhou

DOI: https://doi.org/10.1021/acs.analchem.3c04823

IF: 7.4

2024-04-11

Analytical Chemistry

Abstract:Herein, we present a new method for determining the Ca isotopic composition of geological samples. To eliminate matrix elements from Ca, a column chromatography method was developed using a N,N,N'N' tetraoctyl-1,5-diglycolamide (TODGA) resin. The Ca isotopic compositions were measured by a multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) without collision cell equipment, especially that direct measurement to ^(44)Ca/^(40)Ca can be achieved. To mitigate the interference...

chemistry, analytical
High‐Precision Measurement of Stable Cr Isotopes in Geological Reference Materials by a Double‐Spike TIMS Method

Chun-Yang Liu,Li-Juan Xu,Chun-Tao Liu,Jia Liu,Li-Ping Qin,Zi-Da Zhang,Sheng-Ao Liu,Shu-Guang Li

DOI: https://doi.org/10.1111/ggr.12283

2019-01-01

Geostandards and Geoanalytical Research

Abstract:Chromium (Cr) isotopes have been widely used in various fields of Earth and planetary sciences. However, high‐precision measurements of Cr stable isotope ratios are still challenged by difficulties in purifying Cr and organic matter interference from resin using double‐spike thermal ionisation mass spectrometry. In this study, an improved and easily operated two‐column chemical separation procedure using AG50W‐X12 (200–400 mesh) resin is introduced. This resin has a higher cross‐linking density than AG50W‐X8, and this higher density generates better separation efficiency and higher saturation. Organic matter from the resin is a common cause of inhibition of the emission of Cr during analysis by TIMS. Here, perchloric and nitric acids were utilised to eliminate organic matter interference. The Cr isotope ratios of samples with lower Cr contents could be measured precisely by TIMS. The long‐term intermediate measurement precision of δ53/52CrNIST SRM 979 for BHVO‐2 is better than ± 0.031‰ (2s) over one year. Replicated digestions and measurements of geological reference materials (OKUM, MUH‐1, JP‐1, BHVO‐1, BHVO‐2, AGV‐2 and GSP‐2) yield δ53/52CrNIST SRM 979 results ranging from −0.129‰ to −0.032‰. The Cr isotope ratios of geological reference materials are consistent with the δ53/52CrNIST SRM 979 values reported by previous studies, and the measurement uncertainty (± 0.031‰, 2s) is significantly improved.
Copper Isotope Compositions Measured Using a Sapphire Dual Path MC-ICPMS with a Collision/Reaction Cell

Tu-Han Luu,Daniel Peters,Esther Lahoud,Yvan Gérard,Frédéric Moynier

DOI: https://doi.org/10.1021/acs.analchem.3c05192

IF: 7.4

2024-01-06

Analytical Chemistry

Abstract:We present a new approach to Cu isotopic measurements using a state-of-the-art Nu Sapphire multicollector inductively coupled plasma source mass spectrometer equipped with a collision/reaction cell (CRC-MC-ICPMS). We investigate the effects of Na doping and Cu concentration mismatch between bracketing standard and unknown samples and demonstrate the efficacy of introducing a He-H(2) gas mix into the CRC to efficiently eliminate the sample matrix-based ^(40)Ar^(23)Na^(+) isobaric interference on...

chemistry, analytical
Efficient Cd separation protocols for high-precision cadmium isotope analyses of diverse samples by double spike MC-ICP-MS

Yihang Huang,Zijian Jia,Hui Xu,Katharina Kreissig,Barry J. Coles,Mark Rehkämper,Rebekah E.T. Moore

DOI: https://doi.org/10.1016/j.talanta.2024.127296

IF: 6.1

2024-11-30

Talanta

Abstract:Cadmium isotope analyses are applied for research in planetary, Earth, environmental and life sciences. However, there is still a lack of efficient methods for the separation of the trace element Cd from the different types of samples that are of interest for isotopic analyses. This study presents new and improved Cd separation and purification techniques for meteorite, diverse terrestrial and seawater samples prior to Cd isotope measurements by multiple collector ICP-MS using the double spike approach for mass bias correction. The first separation stage for meteorites and terrestrial samples employs an existing anion exchange chromatography method that uses AG MP-1M resin, whilst AG 1-X8 and Nobias Chelate PA-1 resins were applied for the initial isolation of Cd from small and large seawater samples, respectively. Teflon microcolumns and AG MP-1M anion exchange resin was then employed for further Cd purification of all sample types. The methods consistently isolate Cd from matrix elements more efficiently than previous protocols, whilst achieving consistently high Cd recoveries, of >95% for meteorite and terrestrial samples and >80% for seawater samples, combined with low procedural blanks of <0.08 ng. The performance of the new protocols is demonstrated by repeated Cd isotope analyses of well-characterized geological and biological reference materials, which produced data that are in excellent agreement with results that were obtained with previous, more laborious separation methods. Furthermore, precise Cd isotope compositions (δ 114 Cd) are presented for the Murchison meteorite and, for the first time, the ordinary chondrite GRO 95504. Finally, analyses of seven seawater samples, with Cd concentrations between 0.25 and 0.91 nmol kg -1 using sample volumes of up to 2 L, generated results consistent with those of previous studies. Overall, the new methods thus enable unbiased δ 114 Cd measurements for diverse sample types with a 2SD precision of better than ±0.07‰, even for samples with 10 ng or less of natural Cd.

chemistry, analytical

High Intermediate Precision Sm Isotope Measurements in Geological Samples by MC-ICP-MS

High-precision Double-Spike Sn Isotope Analysis of Geological Materials by MC-ICP-MS

High-precision measurement of Ag isotopes for silicate rocks by MC-ICP-MS

Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

High-sensitivity determination of Cd isotopes in low-Cd geological samples by double spike MC-ICP-MS

Applying standard addition to determine antimony isotopes in low-Sb samples using HG-MC-ICP-MS

High precision cadmium isotope analysis of geological reference materials by double spike MC-ICP-MS

A simplified instrumental protocol for trace Nd and Hf isotope measurements (<10 ng) using a MC-ICP-MS and an Apex Omega de-solvating system

An Efficient Li Dual-Column System and High-Precision Li Isotope Measurement of High Matrix and Low-Li Samples by MC-ICP-MS

High precision potassium isotope analysis of geological samples using MC-ICP-MS

Precise/small sample size determination of stable Cd isotope ratios of geological samples with double spike MC-ICP-MS

High-precision Mg isotope analyses of low-Mg rocks by MC-ICP-MS

High Precision Isotope Ratio Measurements of Mercury Isotopes in Cinnabar Ores Using Multi-Collector Inductively Coupled Plasma Mass Spectrometry

An optimal separation method for high-precision K isotope analysis by using MC-ICP-MS with a dummy bucket

High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

High Precision Hg Isotope Analysis of Environmental Samples Using Gold Trap-Mc-Icp-Ms

<i>In situ</i> Hf isotope analysis of cassiterite by LA-MC-ICP-MS: protocol and applications

High-Precision Measurements of 44 Ca/ 40 Ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry without Collision-Cell Technology

High‐Precision Measurement of Stable Cr Isotopes in Geological Reference Materials by a Double‐Spike TIMS Method

Copper Isotope Compositions Measured Using a Sapphire Dual Path MC-ICPMS with a Collision/Reaction Cell

Efficient Cd separation protocols for high-precision cadmium isotope analyses of diverse samples by double spike MC-ICP-MS