High-sensitivity determination of Cd isotopes in low-Cd geological samples by double spike MC-ICP-MS

Decan Tan,Jian-Ming Zhu,Xiangli Wang,Guilin Han,Zhuo Lu,Wenpo Xu

DOI: https://doi.org/10.1039/c9ja00397e

2020-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The accuracy and precision of Cd isotope measurement at different injecting sample sizes.

spectroscopy,chemistry, analytical

What problem does this paper attempt to address?

High precision cadmium isotope analysis of geological reference materials by double spike MC-ICP-MS

Huan Peng,Dong He,Rui Guo,Xing Liu,Nicholas S. Belshaw,Hongtao Zheng,Shenghong Hu,Zhenli Zhu

DOI: https://doi.org/10.1039/d0ja00424c

2021-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The effect of the DS ratio is evaluated and a correction approach is proposed to improve the accuracy and robustness of the proposed DS Cd isotope analysis.

spectroscopy,chemistry, analytical
Precise/small sample size determination of stable Cd isotope ratios of geological samples with double spike MC-ICP-MS

Chao Guo,Tao Li,Gaojun Li,Tianyu Chen,Le Li,Liang Zhao,Junfeng Ji

DOI: https://doi.org/10.1039/d2ja00250g

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The precise determination of Cd isotope ratios via multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) has made the widespread application of Cd isotopes possible. However, previous studies are complicated by the chemical purification method and molecular interferences from Zn (e.g.(ZnAr+)-Zn-70-Ar-36, (ZnAr+)-Zn-68-Ar-38, and (ZnAr+)-Zn-66-Ar-40 on Cd-106(+), (ZnAr+)-Zn-70-Ar-38 and (ZnAr+)-Zn-68-Ar-40 on Cd-108(+), (ZnAr+)-Zn-70-Ar-40 on Cd-110(+)). Separation of Zn from Cd requires the usage of a toxic reagent (HBr) and is also complicated by the relatively high procedural Zn blank especially when only a very small amount of Cd is available. Here we present a high-precision Cd isotope measurement method using double spike MC-ICP-MS, which avoids the molecular interferences from Zn introduced by both sample and chemical purification. A Cd-111-Cd-113 double spike pair optimized for the Cd-111, Cd-112, Cd-113, and Cd-114 inversion was used to correct for the mass bias. Elemental doping experiments suggest that the measured Cd isotope data were not significantly affected when the measured solution has, Zn/Cd < 10(3), Pd/Cd < 10(2), Fe/Cd < 10(-2), In/Cd < 10(-3), Sn/Cd < 10(-1), Zr/Cd < 10(-2), Nb/Cd < 10(-1), Mo/Cd < 10(-2), Ru/Cd < 10(-2), Ga/Cd < 10(-2), Ge/Cd < 10(-2), Se/Cd < 10(-1), and As/Cd < 10(-1). We thus modified the chemical purification method by removing the HBr step and eluting Zn and Cd together. The minimum requirement of sample size for precise measurement of stable Cd isotope ratios was tested to be as low as 10 ng. The measurements of pure Cd solutions (BAM I012 Cd and HPS Cd) give a long-term intermediate precision for delta Cd-114/110 relative to NIST SRM 3108 of 0.05 parts per thousand. We further validated our method by measuring different reference materials covering a relatively wide range of Zn/Cd (similar to 9 to 1239), the results of which agree within uncertainty with previous studies. Our study thus provides an efficient and precise way to determine stable Cd isotope ratios of geological samples with relatively low Cd concentrations.
High‐Precision Cd Isotope Measurements of Soil and Rock Reference Materials by MC‐ICP‐MS with Double Spike Correction

Meng-Shu Liu,Qun Zhang,Yingnan Zhang,Zhaofeng Zhang,Fang Huang,Hui-Min Yu

DOI: https://doi.org/10.1111/ggr.12291

2020-01-01

Geostandards and Geoanalytical Research

Abstract:This study presents a high‐precision Cd isotope measurement method for soil and rock reference materials using MC‐ICP‐MS with double spike correction. The effects of molecular interferences (e.g., 109Ag1H+, 94Zr16O+, 94Mo16O+ and 70Zn40Ar+) and isobaric interferences (e.g., Pd, In and Sn) to Cd isotope measurements were quantitatively evaluated. When the measured solution has Ag/Cd ≤ 5, Zn/Cd ≤ 0.02, Mo/Cd ≤ 0.4, Zr/Cd ≤ 0.001, Pd/Cd ≤ 5 × 10−5 and In/Cd ≤ 10−3, the measured Cd isotope data were not significantly affected. The intermediate measurement precision of pure Cd solutions (BAM I012 Cd, Münster Cd and AAS Cd) was better than ± 0.05‰ (2s) for δ114/110Cd. The δ114/110Cd values of soil reference materials (NIST SRM 2709, 2709a, 2710, 2710a, 2711, 2711a and GSS‐1) relative to NIST SRM 3108 were in the range of −0.251 to 0.632‰, the δ114/110Cd values of rock reference materials (BCR‐2, BIR‐1, BHVO‐2, W‐2, AGV‐2, GSP‐2 and COQ‐1) varied from −0.196‰ to 0.098‰, and that of the manganese nodule (NOD‐P‐1) was 0.163 ± 0.040‰ (2s, n = 8). The large variation in Cd isotopes in soils and igneous rocks indicates that they can be more widely used to study magmatic and supergene processes.
Efficient Cd separation protocols for high-precision cadmium isotope analyses of diverse samples by double spike MC-ICP-MS

Yihang Huang,Zijian Jia,Hui Xu,Katharina Kreissig,Barry J. Coles,Mark Rehkämper,Rebekah E.T. Moore

DOI: https://doi.org/10.1016/j.talanta.2024.127296

IF: 6.1

2024-11-30

Talanta

Abstract:Cadmium isotope analyses are applied for research in planetary, Earth, environmental and life sciences. However, there is still a lack of efficient methods for the separation of the trace element Cd from the different types of samples that are of interest for isotopic analyses. This study presents new and improved Cd separation and purification techniques for meteorite, diverse terrestrial and seawater samples prior to Cd isotope measurements by multiple collector ICP-MS using the double spike approach for mass bias correction. The first separation stage for meteorites and terrestrial samples employs an existing anion exchange chromatography method that uses AG MP-1M resin, whilst AG 1-X8 and Nobias Chelate PA-1 resins were applied for the initial isolation of Cd from small and large seawater samples, respectively. Teflon microcolumns and AG MP-1M anion exchange resin was then employed for further Cd purification of all sample types. The methods consistently isolate Cd from matrix elements more efficiently than previous protocols, whilst achieving consistently high Cd recoveries, of >95% for meteorite and terrestrial samples and >80% for seawater samples, combined with low procedural blanks of <0.08 ng. The performance of the new protocols is demonstrated by repeated Cd isotope analyses of well-characterized geological and biological reference materials, which produced data that are in excellent agreement with results that were obtained with previous, more laborious separation methods. Furthermore, precise Cd isotope compositions (δ 114 Cd) are presented for the Murchison meteorite and, for the first time, the ordinary chondrite GRO 95504. Finally, analyses of seven seawater samples, with Cd concentrations between 0.25 and 0.91 nmol kg -1 using sample volumes of up to 2 L, generated results consistent with those of previous studies. Overall, the new methods thus enable unbiased δ 114 Cd measurements for diverse sample types with a 2SD precision of better than ±0.07‰, even for samples with 10 ng or less of natural Cd.

chemistry, analytical
An efficient Cd two-stage column system for high-precision determination of Cd isotopic compositions by double spike MC-ICP-MS

Zheyuan Zhang,Tao Li,Baichan Li,Yibo Lin,Gaojun Li,Tianyu Chen

DOI: https://doi.org/10.1039/d3ja00468f

2024-03-12

Journal of Analytical Atomic Spectrometry

Abstract:There has been a growing interest in using cadmium (Cd) isotopes to trace the source of Cd contamination and Cd cycling in the Earth surface. Yet it remains technically challenging to precisely and efficiently determine the Cd isotopic compositions of samples with extremely low Cd concentrations due to the imperfect separation of Cd from the matrix and the interference caused by resin-derived organics when TRU Spec resin was used. In this study, we present a two-stage column chromatography system (AG-MP-1M resin + UTEVA resin) for Cd purification. Here, a Prefilter resin combined with UTEVA resin effectively purifies Cd from Sn after the separation of Cd by AG-MP-1M column while keeping the phosphorous organic compounds to an acceptable level. In contrast to TRU Spec resin, which is prone to leaking through the Prefilter resin, we find that UTEVA resin is effectively retained by the Prefilter resin, thus avoiding the P-related anomalous shifts in the Cd isotope measurement (P/Cd < 1). UTEVA resin also exhibits a comparable capacity for purifying Cd from Sn and Mo when compared to TRU Spec resin. The recovery of the two-stage column system is generally higher than 99% and the procedural blank accounting for sample digestion and chemical purification is lower than 20 pg. The Cd isotopic compositions of several reference materials are determined using double spike MC-ICP-MS, with a 111Cd-113Cd double spike pair optimized for the 111Cd, 112Cd, 113Cd, and 114Cd inversion. The δ114/110Cd values of these reference materials relative to NIST SRM 3108 agree within analytical uncertainty with previous studies. The long-term external precision of δ114/110Cd determined based on replicated measurements of BCR-2 is 0.04‰ (n=10, 2SD) for a minimum sample size of 10 ng. Our study thus provides an efficient two-stage column system for determining the Cd isotopic compositions of geological samples with relatively low Cd concentrations.

spectroscopy,chemistry, analytical
High-precision Double-Spike Sn Isotope Analysis of Geological Materials by MC-ICP-MS

Jia-Xin She,Weiqiang Li,Shichao An,Yuanfeng Cai

DOI: https://doi.org/10.1039/d2ja00339b

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:This study proposes a new robust protocol for stable Sn isotope measurements using the double-spike method in geological reference materials with a range of sample matrices.
AMS measurement of 53Mn and its initial application at CIAE

Kejun Dong,Duo Zhou,Yongning Xu,Ming He,Guangshan Liu,Hao Hu,Liang Dou,Jiancheng Liu,Shaoyong Wu,Xianggao Wang,Hongtao Shen,Kangning Li,Qubo You,Yiwen Bao,Yueming Hu,Chunsheng Jin,Xinyi Yin,Shan Jiang

DOI: https://doi.org/10.1016/j.nimb.2015.05.026

2015-01-01

Abstract:The determination of cosmogenic 53Mn in terrestrial archives has important applications, such as burial ages, exposure age and erosion rates. Accelerator mass spectrometry (AMS) is the most sensitive technique to detect minute amounts of 53Mn. 53Mn measurements were developed at the China Institute of Atomic Energy (CIAE) using the ΔE-Q3D equipped AMS system. This approach was recently optimized with the goal to reach the sensitivity required for AMS measurements of 53Mn in deep-sea ferromanganese crust (DSFC) samples. Based on these improvements of sample preparation, current beam transmission and so on, 53Mn in two samples of DSFC was measured by AMS. The ratios of 53Mn/Mn corresponding to an age of 3.77±0.42 and 13.73±2.74Ma by 129I dating method are (5.01±2.15)×10−13 and (1.90±0.96)×10−13. The ratios are close to the experimental reference values, deduced from the previous research. The experimental progress, performances and results are presented in this contribution.
High-precision low-level Cd isotopic analysis using MC-ICP-MS and its application to marine samples from Terra Nova Bay (Antarctica)

Maria Alessia Vecchio,Frank Vanhaecke,Lana Abou-Zeid,Marco Grotti

DOI: https://doi.org/10.1039/d4ja00214h

2024-09-15

Journal of Analytical Atomic Spectrometry

Abstract:This study presents the development, validation and use of an approach for precise and accurate cadmium (Cd) isotopic analysis at low concentration levels using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) equipped with a standard sample introduction system, an ICP operated under wet plasma-conditions, and Faraday cup amplifiers equipped with 10^13 Ω resistors. One-column anion exchange chromatography allowed isolation of Cd with ≥ 80% recovery and absence of potential on-column fractionation on the isotope ratio results was demonstrated. Use of both an internal (using Ag) and an external (measured in a sample-standard bracketing sequence) standard was relied on for correction for instrumental mass discrimination. A long-term precision of 0.09‰ (2SD) for δ114/110Cd was achieved at a Cd concentration of 10 ng mL-1. The method developed was validated by analysing NIST 2711a (Montana soil) and TORT-3 (Lobster hepatopancreas) reference materials, yielding results consistent with literature values. Subsequently, the method was applied to two Antarctic marine organisms Adamussium colbecki and Trematomus bernacchii, collected during both the 1990s and 2020s, to investigate potential changes in the biogeochemical cycle of Cd over time and evaluate the potential for identifying potential natural or anthropogenic sources. A preferential uptake of the lighter Cd isotopes in both species was observed, indicated by negative δ114/110Cd values ranging between -0.24 and -0.09‰. This finding is consistent with previous studies that have reported Cd fractionation during its uptake by marine organisms, with a preference for lighter isotopes. No significant differences in δ114/110Cd‰ values were observed between organs of the same species or between the same species collected in the different decades, suggesting minimal Cd isotopic fractionation during internal transfer and consistent Cd sources over time. Comparison with literature data suggests that the Cd source in Antarctic biota may be predominantly of natural origin, with δ114/110Cd‰ values indicating isotopically heavier Cd than that found in Cd-polluted areas. However, further Cd isotope ratio data from various Antarctic sample types are necessary to further evaluate the Cd sources in marine samples.

spectroscopy,chemistry, analytical
Elimination of Matrix Effect and Spectral Interference by Two Compactly Combined Separations in the Determination of Cd in Geological Samples with High Mo, Zr or Sn Contents by Icp-Ms

Taicheng Duan,Xuejie Song,Pengran Guo,Hongfei Li,Lihua Pan,Hangting Chen,Jingwei Xu

DOI: https://doi.org/10.1039/b610685d

2007-01-01

Journal of Analytical Atomic Spectrometry

Abstract:The determination of Cd in geological samples with high Mo, Zr or Sn contents by ICP-MS suffered from matrix effects and severe spectral interferences. In this work solvent and solid phase extractions ( SPE) were combined and both matrix and spectral interference free determinations were realized. After solvent extraction with an acidic extractant, interferences from Sn and Zr were reduced over 1000 fold, and Mo about 250 fold, while matrix elements could be e. ectively removed by a SPE column. A linear working curve could be obtained between Cd concentrations of 0.2 - 20 mu g L-1, with a correlation coefficient of 0.9992. Cd recoveries in both separation systems were shown to be near 100%, and a total enrichment factor could reach 22. Feasibility of the established method was demonstrated by analyzing three soil geological standard reference materials with high Mo, Zr or Sn contents. The results showed that the established method was accurate, fast, low in procedural blank value, and good in Cd recovery.
High Precision Isotope Ratio Measurements of Mercury Isotopes in Cinnabar Ores Using Multi-Collector Inductively Coupled Plasma Mass Spectrometry

H Hintelmann,SY Lu

DOI: https://doi.org/10.1039/b300451a

2003-01-01

Abstract:Variations in Hg isotope ratios in cinnabar ores obtained from different countries were detected by high precision isotope ratio measurements using multi-collector inductively coupled mass spectrometry (MC-ICP- MS). Values of delta(198/202)Hg varied from 0.0 - 1.3parts per thousand relative to a NIST SRM 1641d Hg solution. The typical external uncertainty of the delta values was 0.06 to 0.26parts per thousand. Hg was introduced into the plasma as elemental Hg after reduction by sodium borohydride. A significant fractionation of lead isotopes was observed during the simultaneous generation of lead hydride, preventing normalization of the Hg isotope ratios using the measured (208/206)Pb ratio. Hg ratios were instead corrected employing the simultaneously measured (205/203)Tl ratio. Using a 10 ng ml(-1) Hg solution and 10 min of sampling, introducing 60 ng of Hg, the internal precision of the isotope ratio measurements was as low as 14 ppm. Absolute Hg ratios deviated from the representative IUPAC values by approximately 0.2% per u. This observation is explained by the inadequacy of the exponential law to correct for mass bias in MC-ICP- MS measurements. In the absence of a precisely characterized Hg isotope ratio standard, we were not able to determine unambiguously the absolute Hg ratios of the ore samples, highlighting the urgent need for certified standard materials.
High-Precision Measurements of 44 Ca/ 40 Ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry without Collision-Cell Technology

Hai-Ou Gu,Xiya Liu,He Sun,Guochao Sun,Dongyong Li,Fangyue Wang,Can Ge,Yu Fan,Taofa Zhou

DOI: https://doi.org/10.1021/acs.analchem.3c04823

IF: 7.4

2024-04-11

Analytical Chemistry

Abstract:Herein, we present a new method for determining the Ca isotopic composition of geological samples. To eliminate matrix elements from Ca, a column chromatography method was developed using a N,N,N'N' tetraoctyl-1,5-diglycolamide (TODGA) resin. The Ca isotopic compositions were measured by a multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) without collision cell equipment, especially that direct measurement to ^(44)Ca/^(40)Ca can be achieved. To mitigate the interference...

chemistry, analytical
High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

Hai-Ou Gu,Xiya Liu,He Sun,Guochao Sun,Dongyong Li,Fangyue Wang,Can Ge,Yu Fan,Taofa Zhou

DOI: https://doi.org/10.1021/acs.analchem.3c04823

IF: 7.4

2024-01-01

Analytical Chemistry

Abstract:Herein, we present a new method for determining the Ca isotopic composition of geological samples. To eliminate matrix elements from Ca, a column chromatography method was developed using a N,N,N'N' tetraoctyl-1,5-diglycolamide (TODGA) resin. The Ca isotopic compositions were measured by a multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) without collision cell equipment, especially that direct measurement to 44Ca/40Ca can be achieved. To mitigate the interference from 40Ar during 40Ca measurement, the cold plasma technique was used to suppress the Ar+ generation, resulting in a background Ar+ intensity of <300 mV, in contrast to the conventional hot plasma conditions, which typically yield thousands of volts for Ar+ intensities. Given the potential for a concentration mismatch between the sample and bracketed standard solutions to cause an intensive shift in measured Ca isotopic compositions, a correction for the [Ca] match is needed. To avoid matrix effects arising from residue matrix elements, it is crucial to limit the concentrations below 1% of Ca for most matrix elements (including Al, Mg, K, Na, and Sr) and below 1‰ for Fe. Notably, the tolerance of residue Sr is effectively improved compared to measurements with CC-MC-ICP-MS and traditional Hot-plasma-SSB-MC-ICP-MS methods with the conventional hot plasma technique, thereby lowering the complexity of column chemistry. The measured δ44/40Ca, δ44/42Ca, and ε40Ca values for eight reference materials agree well with previously reported values within analytical uncertainties. This method demonstrates long-term precision is better than 0.10‰ (two standard deviations) for both δ values (i.e., δ44/40Ca and δ44/42Ca). We anticipate that the proposed method will benefit the growth of the Ca isotope data set and foster an increase in the application of Ca isotope in Earth science studies.
An analytical method for precise determination of the cadmium isotopic composition in plant samples using multiple collector inductively coupled plasma mass spectrometry

rongfei wei,qingjun guo,hanjie wen,junxing yang,marc peters,chuanwei zhu,jie ma,guangxu zhu,hanzhi zhang,liyan tian,chunyu wang,yingxin wan

DOI: https://doi.org/10.1039/c4ay02435d

IF: 3.1

2015-01-01

Analytical Methods

Abstract:Isotope techniques can be applied to discover the migration and transformation of metal elements in plants. However, only a few studies on Cd isotopes in plants have been carried out so far. In this study, an optimized analytical method consisting of digestion, purification and determination of Cd isotopes in plants was developed. Three Cd standard solutions as well as four plant species (Solanum nigrum, Ricinus communis, Cyperus alternifolius and Pteris vittata), which were grown in soil or hydroponic cultures, were repeatedly analyzed for Cd isotopes using Multiple Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS). The factors that affected the accuracy of Cd isotopic determination, such as isobaric interference and instrumental mass fractionation, have been carefully evaluated and corrected. The purification procedure yielded a Cd recovery of not less than 95% and effectively eliminated the spectral interference of Pd, In and Sn as well. The analysis of pure Cd standard materials showed accurate isotope values, which matched with the results of previously published methods. This technique provided an average long-term external reproducibility of +/- 0.09 parts per thousand for delta Cd-114/110 (2SD). The overall delta Cd-114/110 values of four plant species ranged from -0.39 parts per thousand to -0.08 parts per thousand and provided direct evidence for Cd isotopic fractionation in herbaceous plants.
Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

Yan Hu,Fang-Zhen Teng

DOI: https://doi.org/10.1039/c8ja00335a

2019-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Analytical advances in Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) over the past decade have led to rapid growth in studies utilizing non-traditional stable isotopes. There are substantial analytical challenges for achieving precise and accurate measurements of these isotopes that limit their applications in geoscience where natural isotopic variations are generally small. Here, we evaluate experimental factors that may affect the accuracy and repeatability of isotopic measurements of selected stable metal isotopes (Li, Mg, Fe, Cu, and Zn) on a Nu Plasma II MC-ICPMS to provide optimized analytical protocols for acquiring high quality data. Our results suggest that the repeatability level (2SD) that is readily obtainable for delta Li-7 is +/- 0.09 parts per thousand to +/- 0.24 parts per thousand, for delta Mg-26 is +/- 0.03 parts per thousand to +/- 0.07 parts per thousand, for delta Fe-56 is +/- 0.05 parts per thousand to +/- 0.07 parts per thousand, for delta Cu-65 is +/- 0.03 parts per thousand to +/- 0.05 parts per thousand, and for delta Zn-66 is +/- 0.02 parts per thousand to +/- 0.04 parts per thousand. Instrumental mass bias for these isotope systems can be corrected adequately using the standard-sample bracketing method but it requires that target elements are of high purity, a close match in analyte concentrations between samples and bracketing standards, and preparation of all running solutions using the same concentration of nitric acid. Overall, the Nu Plasma II is well suited for precise and accurate analyses of the isotopes studied here, and the optimal results were obtained using a 'wet' plasma operating at a normal radio-frequency (RF) power.
Correction: High-precision measurement of Cd isotopes in ultra-trace Cd samples using double spike-standard addition MC-ICP-MS

Hui Chang,Jian-Ming Zhu,Xiangli Wang,Ting Gao

DOI: https://doi.org/10.1039/d4ja90017k

2024-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Correction for ‘High-precision measurement of Cd isotopes in ultra-trace Cd samples using double spike-standard addition MC-ICP-MS’ by Hui Chang et al. , J. Anal. At. Spectrom. , 2023, 38 , 950–962, https://doi.org/10.1039/D3JA00047H.

spectroscopy,chemistry, analytical
Precise Determination of Cd Isotope Ratios at 3-10 ng Level by Thermal Ionization Mass Spectrometry Using a Molybdenum Silicide Emitter

Chao-Feng Li,Zhu-Yin Chu,Peng Peng

DOI: https://doi.org/10.1021/acs.analchem.4c03362

IF: 7.4

2024-09-11

Analytical Chemistry

Abstract:Thermal ionization mass spectrometry (TIMS) combined with the double spike technique has excellent analytical precision for Cd isotopic ratio analysis. However, because of the low ionization efficiency of Cd by TIMS, it is still not possible to obtain high precision Cd isotope ratios for small sample size (<100 ng) due to the lack of a highly sensitive emitter for Cd. A new loading method using molybdenum silicide (MoSi(2)) emitter has been developed for Cd isotope ratio measurements. This...

chemistry, analytical
Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Yihuan Song,Feng Guo,Pingxiu Zeng,Jinhua Liu,Yuanchao Wang,Heyong Cheng

DOI: https://doi.org/10.1016/j.aca.2022.339935

IF: 6.911

2022-01-01

Analytica Chimica Acta

Abstract:Toxicity, mobility, bioavailability and biofunctions of chromium, cadmium, mercury and lead are heavily dependent upon their specific chemical forms, leading to a high demand to metal speciation analysis rather than total quantification. Simultaneous speciation analysis of multiple metal(loid)s is attractive to a large sample capacity containing unstable analytes due to its economic and environmental advantages over the conventional single elemental strategies. In this work, an analytical method integrating online solid phase extraction into high performance liquid chromatography interfaced with inductively coupled plasma mass spectrometry (ICP-MS) to simultaneously preconcentrate and quantify Cr, Cd, Hg and Pb forms in pg L-1 levels in water was developed. Cr (III + VI), Cd(II), Hg(II), Pb(II), methylmercury (MeHg), ethylmercury (EtHg), and trimethyl (TML) and triethyl lead (TEL) were captured by the C18 adsorbent (equilibrated with 10 mL of 1.0 mM 2-hydroxyethanethiol at 10 mL min-1) and eluted by mobile phase (5.0 mM Cys at pH 2.0), then completely separated on the C18 column within 8.0 min and eventually determined by ICP-MS. Low limits of detection (0.001-0.007 ng L-1) and quantification (0.003-0.023 ng L-1), good relative standard deviations (<4%) and high enrichment factors (827-2656 folds) were obtained with good linearities. Three reference materials of total cadmium (GBW08602), total mercury (GBW08603) and total lead (GBW08601) in water were analyzed by the developed method to validate the accuracy with good agreement with certified values and satisfactory recoveries (92-100%). This method was proved feasible by the determination of Cr, Cd, Hg and Pb compounds in drinking water, river water, pond water and tap water.
Direct determination of cadmium in geological samples by slurry sampling electrothermal atomic absorption spectrometry

Hao Cui,Wei Guo,Mengting Cheng,Ping Zhang,Lanlan Jin,Qinghai Guo,Shenghong Hu

DOI: https://doi.org/10.1039/c5ay01719j

IF: 3.1

2015-01-01

Analytical Methods

Abstract:An accurate and high throughput method involving slurry sampling ETAAS was developed to detect trace Cd content in various geological samples.

spectroscopy,chemistry, analytical,food science & technology
Precise measurements of δ88/86Sr for twenty geological reference materials by double-spike MC-ICP-MS

Xu-Qi Chen,Zhen Zeng,Hui-Min Yu,Nan Sun,Fang Huang

DOI: https://doi.org/10.1016/j.ijms.2022.116883

IF: 1.934

2022-01-01

International Journal of Mass Spectrometry

Abstract:Analytical method using double-spike and MC-ICP-MS can provide high efficiency of measurement for stable Sr isotopic compositions (δ88/86Sr). Here we report a method for high precision measurement of δ88/86Sr using MC-ICP-MS. A84Sr–87Sr double-spike was used to correct instrumental mass bias of stable Sr isotopes. Strontium was purified by a cation exchange resin (AG50W-X12, 200–400 mesh), and for samples with high Er, Yb, Lu, and Hf contents, an additional chromatographic purification procedure was applied. The potential effects of doubly charged ion isobaric inferences and different measurement conditions were rigorously evaluated to improve the analytical precision. Data quality was monitored by measuring three USGS reference materials (BHVO-2, AGV-2, and G-2) and two in-house reference materials, giving the long-term precision of 0.03‰ (2SD) for δ88/86Sr. Twenty reference materials, including nine igneous rocks, four sedimentary rocks, two sediments, and five soils, have δ88/86Sr values range from −0.06‰ to 0.35‰, showing resolvable isotope fractionation during magmatic and supergene processes. This study provides a useful standard dataset for inter-laboratory comparison of stable Sr isotope studies.
High-precision measurement of Ag isotopes for silicate rocks by MC-ICP-MS

Yuan Fang,Qiu-Yu Wen,Zi-Cong Xiao,Hui-Min Yu,Fang Huang

DOI: https://doi.org/10.1039/d3ja00424d

2024-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Silver (Ag) isotopes can be a useful geochemical and environmental tracer, but its applications are hindered by the challenges of Ag isotope analyses, especially for samples with extremely high matrix...

spectroscopy,chemistry, analytical

High-sensitivity determination of Cd isotopes in low-Cd geological samples by double spike MC-ICP-MS

High precision cadmium isotope analysis of geological reference materials by double spike MC-ICP-MS

Precise/small sample size determination of stable Cd isotope ratios of geological samples with double spike MC-ICP-MS

High‐Precision Cd Isotope Measurements of Soil and Rock Reference Materials by MC‐ICP‐MS with Double Spike Correction

Efficient Cd separation protocols for high-precision cadmium isotope analyses of diverse samples by double spike MC-ICP-MS

An efficient Cd two-stage column system for high-precision determination of Cd isotopic compositions by double spike MC-ICP-MS

High-precision Double-Spike Sn Isotope Analysis of Geological Materials by MC-ICP-MS

AMS measurement of 53Mn and its initial application at CIAE

High-precision low-level Cd isotopic analysis using MC-ICP-MS and its application to marine samples from Terra Nova Bay (Antarctica)

Elimination of Matrix Effect and Spectral Interference by Two Compactly Combined Separations in the Determination of Cd in Geological Samples with High Mo, Zr or Sn Contents by Icp-Ms

High Precision Isotope Ratio Measurements of Mercury Isotopes in Cinnabar Ores Using Multi-Collector Inductively Coupled Plasma Mass Spectrometry

High-Precision Measurements of 44 Ca/ 40 Ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry without Collision-Cell Technology

High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

An analytical method for precise determination of the cadmium isotopic composition in plant samples using multiple collector inductively coupled plasma mass spectrometry

Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

Correction: High-precision measurement of Cd isotopes in ultra-trace Cd samples using double spike-standard addition MC-ICP-MS

Precise Determination of Cd Isotope Ratios at 3-10 ng Level by Thermal Ionization Mass Spectrometry Using a Molybdenum Silicide Emitter

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Direct determination of cadmium in geological samples by slurry sampling electrothermal atomic absorption spectrometry

Precise measurements of δ88/86Sr for twenty geological reference materials by double-spike MC-ICP-MS

High-precision measurement of Ag isotopes for silicate rocks by MC-ICP-MS