Abstract:Ultrasound-assisted extraction is compared with slurry sampling and microwave-assisted acid digestion for the determination of cadmium, lead and copper in biological samples and cadmium in sediment samples by electrothermal atomic absorption spectrometry (ETAAS). The main advantage of using an ultrasound-assisted extraction in comparison to slurry sampling is a doubling of the tube lifetime for all the chosen analytes, most likely because the sample matrix was not introduced into the atomiser, avoiding the build up of carbonaceous residues or silicates on the graphite platform. Consequently the analytical variable costs were remarkably diminished. In comparison to microwave-assisted digestion, ultrasound-assisted extraction resulted typically in a two-fold better precision and better detection limits. For the extraction, slurries in nitric acid were sonicated for 2–5 min using a titanium probe. Subsequently, the solid phase was separated by centrifugation, and 20 µl of the liquid phase was introduced into a graphite tube previously treated with a W–Rh permanent modifier. For slurry sampling, the slurries were sonicated for 20 s before being delivered to the W–Rh treated platform. Nitric acid concentration, sonication time, sonication power, sample mass and particle size were optimised for each analyte to obtain quantitative recoveries. For cadmium the optimum conditions (sediments and biological materials) were, 0.2–3.0% m/v slurry, 0.5% HNO3, 2 min sonication at 15 W. For copper and lead (biological materials only) the optimum conditions were 0.2–2.0% m/v slurry, 5.0% HNO3, 5 min 35 W. The particle size chosen for all analytes was <30 µm. For biological materials, the extraction recoveries were: Cd, 95–105%; Cu, 90–101%; and Pb, 88–98%. However, only cadmium was quantitatively extracted (based on the certified values of the reference materials) from sediment samples (recoveries 92–95%). For Pb and Cu the maximum recoveries attained were 54% and 60% respectively. Detection limits, based on integrated absorbance for the extracts of a 2.5% m/v biological material were: Cd, 3.0 ng g−1; Cu, 88 ng g−1; and Pb, 55 ng g−1. For 0.5% m/v sediment the cadmium detection limit was 15 ng g−1.

Direct determination of cadmium in geological samples by slurry sampling electrothermal atomic absorption spectrometry

In-situ Detection of Cadmium with Aptamer Functionalized Gold Nanoparticles Based on Smartphone-Based Colorimetric System

In Situ Determination of Cadmium and Lead in Water Environment Based on Microelectrode Array Combined PLS with Local Optimum Method

Highly Sensitive Determination of Cadmium by Atomic Emission Spectrometry with Miniaturized Solution Anode Glow Discharge

Highly sensitive determination of cadmium and lead in whole blood by electrothermal vaporization-atmospheric pressure glow discharge atomic emission spectrometry

Low-volume, high-sensitivity assay for cadmium in blood and urine using conventional atomic absorption spectrophotometry

Accurate Determination of Trace Cadmium in Soil Samples with Graphite Furnace Atomic Absorption Spectrometry Using Metal–Organic Frameworks as Matrix Modifiers

Analysis of Trace Heavy Metal in Solution Using Liquid Cathode Glow Discharge Spectroscopy

Comparison of ultrasound-assisted extraction, slurry sampling and microwave-assisted digestion for cadmium, copper and lead determination in biological and sediment samples by electrothermal atomic absorption spectrometry

Octadecyl immobilized surface for precipitate collection with a renewable microcolumn in a lab-on-valve coupled to an electrothermal atomic absorption spectrometer for ultratrace cadmium determination.

A Sequential Injection On-Line Column Preconcentration System for Determination of Cadmium by Electrothermal Atomic Absorption Spectrometry

High-sensitivity determination of Cd isotopes in low-Cd geological samples by double spike MC-ICP-MS

Determination of Cadmium in Biological-Materials by Flame Atomic-Absorption Spectrometry with Flow-Injection Online Sorption Preconcentration

Rapid and simultaneous detection of cadmium and mercury in foods based on solid sampling integrated electrothermal vaporization technique

Electrochemical Aptasensor for Ultrasensitive Cadmium Detection Through Hybridization Chain-Amplified Reaction

Determination of Metals in Environmental Waters by Solution Cathode Glow Discharge -Atomic Emission Spectroscopy (SCGD-AES) with a Syringe Pump for Sample Introduction

Environmental Geochemistry of Cadmium in Solid Wastes at Jinding Mine Area

Rapid, Simultaneous, and Automatic Determination of Lead and Cadmium in Cereals with a New High Performance Composite Hollow Cathode Lamp Coupled to Graphite Furnace Atomic Absorption Spectrometry

Development of Analytical Strategy for the Determination of Cadmium by Flame Atomic Absorption Spectrometry After Dithizone/Deep Eutectic Solvent Probe Based Liquid Phase Microextraction

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

8.2.2 A High Spatial Resolution MEA for Voltammetric Analysis of Trace Metals in Water Pollution Based on Partial Least Squares Regression