Abstract:In this study, one particular application of in situ pulse anodic stripping voltammetry and polytetrafluoroethylene membrane-based liquid three-phase micro extraction is presented for the micro extraction and quantification of cadmium(II) ions in trace levels. The main factors influencing on preconcentration and micro extraction of cadmium ions such as organic solvent, aqueous feed solution pH and acceptor phases, complexing agent concentration, time of extraction and stirring were examined and discussed in details. The design voltammetric cell was made of three microelectrodes inserted into an extraction cell, containing acceptor solution and then the voltammetric analysis was performed in situ during the extraction time. The enrichment factor and the relative standard deviation, under the optimized conditions, were 15 and 1.7% (n = 5), respectively. The obtained calibration curve was in the range of 1.0-250 nmol L-1 CdIIwith a regression coefficient of 0.9980. The limit of detection was found 0.1 nmol L–1. Due to the high total effective area of the gold nanoparticles and the low analyte concentration, the anodic stripping voltammetric method relies exclusively on the underpotential deposition and stripping process of CdIIon gold, with little hydrogen evolution during deposition at -0.40 V and no gassing at the stripping peak near 0.0 V vs. Ag/AgCl. The good selectivity for the underpotential deposition/ stripping method is one of advantages of the proposed method. The efficiency of the method for determination of cadmium(II) for real samples was checked using fish and rice samples.

Development of Analytical Strategy for the Determination of Cadmium by Flame Atomic Absorption Spectrometry After Dithizone/Deep Eutectic Solvent Probe Based Liquid Phase Microextraction

Response surface methodology and hydrophobic deep eutectic solvent based liquid phase microextraction combination for determination of cadmium in food and water samples

Solvent microextraction-flame atomic absorption spectrometry (SME-FAAS) for determination of ultratrace amounts of cadmium in meat and fish samples

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Determination of Cadmium in Biological-Materials by Flame Atomic-Absorption Spectrometry with Flow-Injection Online Sorption Preconcentration

Development of an air-assisted liquid-liquid microextraction method based on a ternary solidified deep eutectic solvent in extraction and preconcentration of Cd(II) and Zn(II) ions

A Natural Deep Eutectic Solvent–based Ultrasound-Vortex-assisted Dispersive Liquid–Liquid Microextraction Method for Ligand-less Pre-concentration and Determination of Traces of Cadmium Ions in Water and Some Food Samples

On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination

Ultrasound-Assisted Ionic Liquid Microextraction for Preconcentration of Cadmium in Water, Vegetables and Hair Samples Prior to FAAS Determination

Determination of copper ion at trace levels in apple tea samples by simultaneous complexation and spray assisted microextraction method prior to detection by flame atomic absorption spectrophotometry

Determination of copper in rose tea samples using flame atomic absorption spectrometry after emulsification liquid-liquid microextraction

Development a novel supramolecular solvent microextraction procedure for copper in environmental samples and its determination by microsampling flame atomic absorption spectrometry

Determination of Cadmium, Lead and Copper in Water Samples by Flame Atomic-Absorption Spectrometry with Preconcentration by Flow-Injection On-Line Sorbent Extraction.

Optimized ultrasound-assisted dispersive liquid–liquid microextraction for simultaneous trace multielement determination of heavy metals in environmental water samples by ICP-MS

A new synthesis, characterization and application chelating resin for determination of some trace metals in honey samples by FAAS

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

A Sequential Injection On-Line Column Preconcentration System for Determination of Cadmium by Electrothermal Atomic Absorption Spectrometry

Trace Determination of Cadmium in Water Matrix by Matrix Matching Calibration Strategy-Based UV-Vis Spectrophotometer After Its Preconcentration

Polytetrafluorethylene Membrane-Based Liquid Three-Phase Micro Extraction Combined with in situ Differential Pulse Anodic Stripping Voltammetry for the Determination of Cadmium Ions Using Au-Nanoparticles Sol-Gel Modified Pt-Wire

Development of a dispersive liquid–liquid microextraction procedure based on a natural deep eutectic solvent for ligand-less preconcentration and determination of heavy metals from water and food samples

On-line Micro-Packed Column Solid-Phase Extraction of Cadmium Using Metal-Organic Framework (MOF) UiO-66 with Posterior Determination by TS-FF-AAS