Abstract:Particle holdup and the average residence time in the cyclone of a Circulating Fluidized Bed (CFB) boiler are important information for describing events post-combustion in the cyclone that often lead to a noticeable increase in the temperature of the flue gas. The existing results for the variation of particle average residence time with fluidizing gas velocity are contradictory since they were obtained under different operation conditions. A cold CFB apparatus made of plexiglass was established with a riser of 5 m in height and 0.2 m in diameter and equipped with a standard Lapple cyclone. The particle holdup was directly measured by the mass in the cyclone when the system was shut down. The solid concentration at the cyclone inlet was kept in the range generally used in CFB boilers. The experimental results showed that the particle holdup in the cyclone was equal to ca. 10-40% of the corresponding bed material in the riser and that it increases monotonously with both the fluidizing gas velocity and the initial static bed height, and approximately linearly with the solid circulation rate. In addition, within the experimental conditions, the cyclone pressure drop increases monotonously with particle holdup. It was found that the average residence time of the particles either increased or decreased linearly with the fluidizing gas velocity, depending on the initial static bed height. Nevertheless, both variation rates were very small. In a view of engineering applications, the average residence time of the particles in the cyclone is insignificantly affected by the fluidizing gas velocity, initial bed inventory and solid circulation rate, within the range of experimental conditions examined.

Particle Residence Time Determination with More Than 400 Tracer Particles in a Circulating Fluidized‐Bed Full‐Loop System

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Particle Residence Time Distribution in a Circulating Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Measurement of circulation time of particles in fluidized bed based on electrostatic induction sensor

Stable Operating Range and Solids Residence Time of Fine Fluorite Particles in the Two-Stage Fluidized Bed

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Application of phosphor tracer technique to the measurement of solid RTD in circulating fluidized bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed

THERMAL TRACER METHOD FOR MEASURING PARTICLE CIRCULATING VELOCITY IN BUBBLE CIRCULATING FLUIDIZED BEDS

Measurement and modeling of solids flow behaviors in an aerated standpipe and inclined pipe of circulating fluidized bed full-loop system

K-1413 Experimental Study on Characteristic of Particles at Exit Zone in CFBB by PTV

Lateral and Axial Mixing of the Dispersed Particles in CFB.

Experimental study on secondary air mixing along the bed height in a CFB with a multi-tracer-gas method

High-fidelity simulation of the 3-D full-loop gas–solid flow characteristics in the circulating fluidized bed

Experimental characterizing the residence time distribution of large spherical objects immersed in a fluidized bed

MEASURING TECHNIQUES USED IN CIRCULATING FLUIDIZED BED RESEARCH

Particle Holdup And Average Residence Time In The Cyclone Of A Cfb Boiler