Abstract:The operating condition and structural state of the converter transformer are closely related to vibration. Abundant harmonics aggravate the vibration of windings and iron cores, resulting in frequent mechanical structural failures, which seriously affect the stable operation of the power system. Traditional research mainly focuses on the vibration of AC transformers without harmonics and there is no in-depth discussion of the vibration mechanism and the numerical calculation model of windings and iron cores under harmonics. In addition, the influence of harmonics, winding connection method and other factors on the vibration characteristics are not clear. Therefore, this paper analyzes the voltage and current harmonic components and contents, establishes a harmonic-vibration numerical model and compares the vibration time-frequency characteristics with or without harmonics and different valve side winding connections through vibration measurement experiments. Finally, a combined simulation analysis reveals the contribution of the windings and core to the tank. The results show that the tank vibration amplitude and dominant frequency will increase under harmonica and the valve side current will affect the dominant frequency. Among these results, when there are harmonics, the amplitude increases by three times, the vibration dominant frequency changes from 100 Hz to 400 Hz and the frequency spectrum widens to 2000 Hz. In particular, the contribution of the winding vibration under the harmonic current will exceed the iron core. The research results reveal the influence of converter transformer harmonics on vibration, which can provide a theoretical basis for numerical calculation of vibration and monitoring of operating conditions and guide the design of structural vibration reduction to reduce mechanical failures caused by vibration.

Analysis on Sound and Vibration Characteristics of Power Transformer under different Harmonics in Load Condition

Analysis Of Transformer'S Winding Vibration Characteristics Using Hilbert-Huang Transform

Noise Characteristics of Distribution Power Transformers under Field Load Conditions

Experimental Analysis of Transformer Core Vibration and Noise under Inter-Harmonic Excitation

The Influence of Load on the Vibration and Noise Characteristics of Transformer

Research on Short-Circuit Vibration of Power Transformer

Analysis and Measurement Methods of Transformer Vibration and Noise Characteristics

Research on Vibration Measurement and Characteristics of Converter Transformer Considering the Influence of Harmonics

Research on Distribution Characteristics of Vibration Signals of ±500 Kv HVDC Converter Transformer Winding Based on Load Test

Vibration Distribution Characteristics on Oil-Tank Surface of a Single-Phase Transformer

A Novel Approach to Investigate the Vibration and Noise in Power Transformers

Research on the influence mechanism of harmonic components on the noise distribution characteristics of converter transformers

Analysis of Harmonic Current and Winding Vibration in Converter Transformer

Analysis of harmonic harm to distribution transformers

Research on Influence of Winding and Core Vibration under Harmonic of Hvdc Converter Transformer

Vibration and noise suppression method of transformer

Vibration Measurement and Numerical Modeling Analysis of Transformer Windings and Iron Cores Based on Voltage and Current Harmonics

Multi physical field coupling simulation analysis of power transformer vibration and noise

Influence of Frequency Components of Short-Circuit Electromagnetic Force on Vibration Characteristics of Power Transformer Windings

Vibration and Sound Waveform Analysis of 500 Kv Single Phase Power Transformer

Investigation on Vibration Source and Transmission Characteristics in Power Transformers