Abstract:Abstract In order to further understand and grasp the impact of load on the vibration and noise characteristics of the transformer, this article analyzes the impact of load factors, power factor, harmonic current, three-phase unbalance and other load factors on transformer vibration and noise from the perspective of transformer vibration mechanism. A 10kV/200kVA three-phase oil-immersed distribution transformer was used as the object. Experiments were conducted to study the changes in the spectrum distribution, noise intensity and A-weighted sound pressure level of the transformer vibration and noise under the influence of different load factors. The results show that: when the frequency increases, the amplitude of the 100Hz fundamental frequency in the vibration noise signal increases, and the noise level increases accordingly; when the power factor increases, the amplitude of the odd frequency components in the vibration noise signal gradually decreases with the increase of the power factor. There is no obvious fluctuation in amplitude except 100Hz. When the harmonic current and the three-phase are unbalanced, the spectral components become complicated and accompanied by a large number of odd-order frequency multiplication components. With the increase of harmonic content, the amplitude of vibration noise signal and A-weighted sound pressure level increase significantly; the degree of unbalance and the occurrence of unbalance have a greater impact on the amplitude of vibration noise signal and A-weighted sound pressure level. The research in this paper provides a reference for the noise suppression of power equipment and the fault diagnosis technology based on vibration and noise signals.

Research on Distribution Characteristics of Vibration Signals of ±500 Kv HVDC Converter Transformer Winding Based on Load Test

Analysis Of Transformer'S Winding Vibration Characteristics Using Hilbert-Huang Transform

Analysis of Harmonic Current and Winding Vibration in Converter Transformer

Vibration Characteristics of ± 800 Kv Converter Transformers Part II: under Load Conditions

Vibration Characteristics of ±800 Kv Converter Transformers Part I: under No-Load Conditions

Experimental Research on Power Transformer Vibration Distribution under Different Winding Defect Conditions

Field Monitoring and Analysis on Vibration and Noise Characteristics of AC Transformer Caused by ± 660kv Yin‐dong DC System

Study Of Vibration Sensitive Areas On 500kv Power Transformer Tank

The Inner Voltage Component Analysis and Testing System for Converter Transformer Valve Side Bushings

On-line Monitoring and Characteristic Analysis of Converter Transformer Vibration

Analysis on Sound and Vibration Characteristics of Power Transformer under different Harmonics in Load Condition

The Vibration Analysis of HVDC Converter Module Based on Experiment under Working Conditions

Transformer Winding Faults Diagnosis Based on Vibration Distribution Characteristics

Diagnosis of Transformer Winding Looseness Based on Vibration Sensor Array

Study on Transformer Tank Vibration Characteristics in the Field and Its Application

Study on diagnosis of power transformer winding deformation through vibration signal

The Influence of Load on the Vibration and Noise Characteristics of Transformer

Vibration Distribution Characteristics on Oil-Tank Surface of a Single-Phase Transformer

Research on Vibration Characteristic Analysis and Fault Diagnosis Method of Oil‐Immersed Transformer Based on Multi‐Physics Coupling

Research on the dynamic characteristics of electric field distribution of the ± 1100 kV Ultra high voltage converter transformer valve‐side bushing using weakly ionised gas conductance model

Research on Vibration Signal of Transformer Tank Surface under No-Load Condition