Abstract:The layer-by-layer processing features of laser melting deposited (LMD) TC11 titanium alloy inevitably lead to microstructural inhomogeneity, and the grain morphology associated with micro-orientations induces plastic anisotropy, which causes uneven deformation and further performance deterioration. Understanding the main causes of these characteristics and how to distinguish their relative roles in inducing plastic anisotropy is critical. In this work, a high-efficiency LMD process is developed. Then, the individual factors causing the formation of elongated grains, microstructural inhomogeneity and micro-orientations are isolated to investigate the synergistic and competitive mechanisms of plastic anisotropy for high-efficiency LMD TC11 titanium alloy before and after various heat treatments. Initially, the TC11 titanium alloy is prepared by the LMD technique under high laser power and then heat-treated via three methods of double annealing in the α+β phase zone. Subsequently, the macro- and microscopic morphology, microstructure, and micro-orientations are characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The individual effects of grain shape, α grain boundary (αGB) and micro-orientations on tensile plastic anisotropy are systematically and thoroughly investigated via a hybrid method consisting of experimental and crystal plasticity finite element simulation methods. By introducing a redefined evaluation indicator of dislocation plugging coefficients, elongated grains are found to be the main source affecting the tensile strength in different loading directions. In addition, with increasing primary annealing temperature, the breakage degree of αGB parallel to the building direction (BD) is significantly higher than that perpendicular to the BD, which leads to an increase in tensile strength and elongation. Moreover, the preferred <0 0 0 1> orientation leads to different tensile strengths perpendicular and parallel to the BD, which is caused by the transformation between easy-to-slip and hard-to-slip orientations. The micro-orientations mainly affect the yield strength and elongation, while the tensile strength and elongation are simultaneously controlled by the grain morphology and αGB.

Unusual Work Hardening Rate of a 3D Gradient High Purity Ti Fabricated by Laser Surface Treatment

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Influence of laser treatment on the microstructural evolution and performance of Ti65 alloy

On Strain-Hardening Behavior and Ductility of Laser Powder Bed-Fused Ti6Al4V Alloy Heat-Treated above and below the β-Transus

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium

Microstructural Characterization of Pure Titanium Treated by Laser Surface Treatment under Different Processing Parameters

Microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Ti6Al4V functionally graded material via high power and high speed laser surface modification

Effect of heat treatment on microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Microstructure Evolution and Mechanical Properties of Ti-25Ta Alloy Fabricated by Selective Laser Melting and Hot Isostatic Pressing

Anisotropic Tensile Behavior of Ti-47Al-2Cr-2Nb Alloy Fabricated by Direct Laser Deposition

Fundamental Study of In-Situ Strengthening and Formation of Continuous Gradient Titanium Alloys via Laser Directed Energy Deposition

Porosity effect on tensile behavior of Ti-6Al-4V specimens produced by laser engineered net shaping technology

In Situ Electron Backscatter Diffraction Study of Deformation Inhomogeneity under Uniaxial Tension of Laser Melting Deposited TA15 Alloy

Chemical, microstructure, and mechanical property of TiAl alloys produced by high-power direct laser deposition

The Martensitic Transformation and Mechanical Properties of Ti6Al4V Prepared Via Selective Laser Melting

Synergistic and Competitive Mechanisms of Plastic Anisotropy in High-Efficiency Laser Melting Deposited TC11 Alloy

Tailoring the microstructure and mechanical property of laser powder bed fusion fabricated Ti–6Al–2Sn–4Zr–2Mo via heat treatment

Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion