Abstract:To meet the requirement of accurate and convenient 3-D measurement for some large parts in reverse engineering, a full field of view scanning system that is mainly composed of a CCD camera, a galvanometer and a laser projector is proposed in this paper. The camera model is firstly established according to the mapping between the world coordinate system and the computer image. A planar target engraved with square patterns is adopted to calibrate the camera. Based on the rule of cross-ratio invariability, the calibration points are extracted from the square patterns and the lens distortion coefficients are simultaneously acquired. The unknown parameters in camera model are solved using these points. For obtaining the 3-D coordinate of a point in a laser plane, the orientation and position of the laser plane are computed according to the angle of the galvanometer and the intersected lines on the target. And based on the laser orientation and position, the three coordinates of a point in the laser plane can be represented by two of them. Hence, two coordinates can be directly obtained from the camera model. Experiments show that the developed system possesses good accuracy. It can identify the fine structure on a large part, also it is portable and convenient for field measurement.

Galvanometer Driven Optical System for Laser Dynamic Focusing.

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Dynamic Focusing Technology for Laser Galvanometer Scanning of a Selective Laser Melting System

Design of Focusing System in Laser Pattern Generator

Optical Design and Analysis of a High-Speed Triple Galvanometer Laser 3d Scanning System

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Study on large scale 3-D laser dynamic scanning manufacturing systems

Ultrafast and High-Precision Steering of Laser Beams: Using a Synchronized Scanning System with Frequency Domain Feedforward Tuning

Real-time focus control in broad flat field laser material processing

Galvanometer Based In-situ Imaging and Inspection System with Variable Ranges and Resolutions

Non-mechanical Axial Focus Tuning by Coherent Beam Combining Technique

High speed laser processing device and method based on spatial light modulator and scanning galvanometer

A Linear Drive System for the Dynamic Focus Module of Sls Machines

Modeling and Calibration of the Galvanometric Laser Scanning Three-Dimensional Measurement System

Robust tracking with FPGA for high-speed laser galvanometer scanning

Research on High-Speed Precise Mixed Focusing Technology in Laser Carving

Design Of High Precise Focusing System In Laser Direct Writer

A Novel Dynamic Light-Section 3D Reconstruction Method for Wide-Range Sensing

Application of PC Based Galvanometric Scanner with Dynamic Focus in Rapid Prototyping

Study on A Full Field of View Laser Scanning System