Abstract:Three-dimensional (3D) measurement based on structured light, as a non-contact, active, and high-precision measurement technology, is widely applied in the diverse fields of industrial detection, face recognition, reverse engineering, and so on. We adopted an adjustable grating-stripe coding as the dynamic structured-light mode, which can continuously cover the entire measured surface to guarantee high accuracy. A one-axis resonant-mode MEMS mirror combined with a linear laser was used to project the desired adjustable grating stripes, leading to a miniaturized module size. To make the scanning angle of the MEMS mirror matching the intensity distribution of the linear laser, we further introduced a single-chip microcomputer (STM32) to receive the feed-back signals from MEMS mirror, and synchronously controlled the laser power with corresponding function relationship output. Here, the MEMS mirror could provide a resonant frequency of 1.15 kHz, a scanning optical angle of +/- 30 degrees, a feed-back scanning-angle resolution of 0.05 degrees, and a reflected mirror size of 3 mm-diameter circle, respectively. Also, the laser source could generate a line width of 70 mu m at a 300 mm focused distance. To decrease the error in the energy amplitude of each cycle of the structured light stripes, the empirical mode decomposition (EMD) was used to perform principal component analysis and recombination of the structured light stripes. In addition, total harmonic distortion (THD) is used to evaluate the quality of structured light stripes. Finally, the structured light based on the scanning of the MEMS mirrors exhibits a good sinusoidal stripes and high refresh rate, implying high adaptivity for the 3D reconstruction.

Angle Extended Linear MEMS Scanning System for 3D Laser Vision Sensor

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Design Study of a Large-Angle Optical Scanning System for MEMS LIDAR

Development of a Novel Multi-Line Laser Triangulation Scanning System Based on the Rotary Diffraction Grating

A 360-Degree Panoramic Stereo Scanning Measurement System Based on a Panoramic Annular Lens and Omnidirectional Ring Structured Light

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

Low-voltage Wide-Field-of-view Lidar Scanning System Based on a MEMS Mirror.

Research on Key Technologies of MEMS-based 3D Imaging LIDAR Vision System

A 2D Resonant MEMS Scanner with an Ultra-Compact Wedge-Like Multiplied Angle Amplification for Miniature LIDAR Application

Design and Realization of Wide Field-of-View 3D MEMS LiDAR

Stereovision System For 3-D Measurement Of Mems Components

Wide-angle high-precision electronically controlled continuous beam scanning implementation based on MLAS cascaded AFOC

An Omnidirectional 3D Sensor with Line Laser Scanning

Wide Angle and High Frequency Resonant Piezoelectric MEMS Mirror for Laser Beam Scanning Application

Optical System for Scanning Angle Amplification in Tunable Laser Based All-Solid Lidar

MEMS-mirror-based Dynamic Structured Light Projection System for Three-Dimensional Measurement with High Precision

A Multi-View Stereo Measurement System Based on a Laser Scanner for Fine Workpieces

Design of Laser-Synchronized Scanning System for Linear Array LiDAR

Linear Laser Scanning Measurement Method Tracking by a Binocular Vision

MEMS-based adaptive optics scanning laser ophthalmoscopy

A Novel Mechatronic Design of a 3D Laser Scanning System