Abstract:Traditional fault-tolerant strategies inevitably lead to an increase in the amplitude of the fault-tolerant current. In this paper, a new fault-tolerant control (FTC) method is proposed for single-phase open-circuit faults in a multi-operational mode dual five-phase permanent magnet (MODF-PM) motor. The proposed method takes advantage of the motor structural characteristics to keep the amplitude of the faulty stator phase currents under fault-tolerant conditions the same as that under healthy operation. Two main strategies, termed torque compensation method and flux regulation method, are proposed. On one hand, the q-axis current of the inner stator is used to compensate for the torque loss in the case of outer stator failure. On the other hand, the d-axis current is controlled to enhance the magnetic flux of the outer stator. However, in the case of inner stator failure, since the outer stator does not have the magnetization capacity, only the torque compensation method can be used. By analyzing the structure of the motor, a mathematical model is established and two current distribution modes are provided. Based on the principle of minimum copper loss, the optimal operating mode is selected. Finally, the effectiveness of the proposed method is verified through experiments.

Single-Phase Short-Circuit Fault Tolerant Control for Five-Phase Permanent Magnet Machines with Copper Loss Reduction

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Open-Circuit Fault-Tolerant Control for Nonsinusoidal Back EMF Five-Phase PMSM with Copper Loss Reduction.

Online Full Range Copper Loss Minimization for Single-phase Short-circuit Fault Tolerant Control in Five-phase PMSM

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Short-Circuit Fault-Tolerant Control Without Constraint on the D-Axis Armature Magnetomotive Force for Five-Phase PMSM

Fault-tolerant Control Strategy for Five-phase Permanent Magnetic Synchronous Motor under Single Phase Open-circuit Fault Condition

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Fault-Tolerant Control for Single-phase Open-circuit and Short-circuit Fault in Five-phase PMSM with Third-order Harmonic Back EMF Using Coefficients Reconfiguration

Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor for Industry Applications

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes

Open-Circuit Fault-Tolerant Control of Five-Phase PM Machine Based on Reconfiguring Maximum Round Magnetomotive Force.

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

A Generalized Open-Circuit Fault-Tolerant Control Strategy for FOC and DTC of Five-Phase Fault-Tolerant Permanent-Magnet Motor

Post-fault operation for five-phase induction machines under single-phase open using symmetrical components

Simple fault tolerant control of dual three-phase PMSM under one phase open-circuited condition