Abstract:The purpose of this study is to prove the feasibility, efficiency and selectivity of lithium recovery from waste lithium-ion batteries (LIB) via sulfuric acid roasting-water leaching by thermodynamic analysis and experimental verification. The feasibility was proved by Gibbs free energy calculations and experiments. Then, the effects of H 2 SO 4 concentration, roasting temperature and roasting time were assessed on the leaching rate of valuable metals. The results indicate that the leaching efficiency of lithium increases firstly and then decreases with the increase of H 2 SO 4 concentration, roasting temperature and roasting time, more than 91 % lithium are leached under optimized experimental conditions: 50 wt% H 2 SO 4 , roasting temperature of 650°C, and roasting time of 2 h. Meanwhile, the selectivity of lithium is up to 88 % which means overwhelming majority lithium have been separated completely. In addition, the factors which cause sintering phenomenon such as high temperature and longtime roasting will change the microstructure of roasted product extremely, which is inconducive to the subsequent water leaching. The investigations of the phase conversion mechanism by thermodynamic simulation and instrumental characterization indicated that the leaching behaviors of valuable metals might be influenced by the different reaction pathways of the compounds while changing roasting conditions. The recovery process can be divided into two stages: the partial structure of LiNi x Co y Mn z O 2 was destroyed to form metal sulfates at ambient temperature and the solid phase reaction between unreacted LiNi x Co y Mn z O 2 which contained Li + in the unstable layered structure with transition metal sulfates at high temperature. The fully reduced low-valence states are mainly (NiO) 0.75 (MnO) 0.25 and CoO, and basically all Li within the crystalline LiNi x Co y Mn z O 2 was de-intercalated and transformed to soluble Li 2 SO 4 . These results further confirm the advantages of H 2 SO 4 roasting on selective Li recovery, and provide a better understanding of conversion mechanism by combining theory and experiments.

Direct Preparation of Water-Soluble Lithium Salts from Α-Spodumene by Roasting with Different Sulfates

Extraction of Lithium and Synthesis of Kaolinite from α‐Spodumene via Alkali Calcination

Direct Lithium Extraction from α-Spodumene through Solid-State Reactions for Sustainable Li2CO3 Production

Clean and efficient extraction of lithium from montebrasite ore by aluminum sulfate roasting method: Thermal behavior and process optimization

Extraction of Lithium from β-Spodumene via Ion Exchange in Molten Sodium Salts

A Low-Temperature Process for Lithium Extraction from Lithium-Bearing Mineral: Conversion Behavior and Mechanisms

Microwave-enhanced sulfate roasting for lithium extraction from lepidolite: A comprehensive study

Selective lithium recovery from waste lithium-ion batteries by H 2 SO 4 roasting focused on process intensification and conversion mechanism

Na2SO4–NaCl binary eutectic salt roasting to enhance extraction of lithium from pyrometallurgical slag of spent lithium-ion batteries

Selective and efficient extraction of lithium from spodumene via nitric acid pressure leaching

Investigating Exchange Efficiencies of Sodium and Magnesium to Access Lithium from β-Spodumene and Li-Stuffed β-Quartz (γ-Spodumene)

Process for producing lithium carbonate from spodumene concentrate by sulfuric acid method

Aspects of Spodumene Lithium Extraction Techniques

Lithium extraction from β-LiAlSi2O6 using Na2CO3 through thermal reaction

Enhanced lithium extraction from α-spodumene with fluorine-based chemical method: A stepwise heat treatment for fluorine removal

Sulfation Roasting Mechanism for Spent Lithium-Ion Battery Metal Oxides Under SO2-O2-Ar Atmosphere

Efficient Extraction of Lithium and Rubidium from Lepidolite by Medium-Temperature Chlorination Roasting-Water Leaching Process

Selective lithium recovery from black powder of spent lithium-ion batteries via sulfation reaction: phase conversion and impurities influence

Sustainable and efficient recovery of lithium from sodium sulfate by-product of lithium hydroxide production process using solvent extraction

Direct extraction of lithium from ores by electrochemical leaching

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation