Abstract:Surface effect in three different axisymmetric Hertzian contact models is investigated in this paper with a recently developed elastic theory for nanostructured materials, including a Boussinesq problem, contact problem between a rigid flat-ended cylindrical indenter and an elastic half space as well as contact problem between a rigid spherical indenter and an elastic half space. With the help of the Love's strain function method and Hankel integral transformation, closed-form solutions of the stress and displacement fields at the surface of an elastic half space subjected to a concentrated force are achieved, based on which the interface tractions and displacements in the three different axisymmetric contact problems can be further obtained. It is found that surface effect in these contact problems can be characterized only by an intrinsic length, i.e., the ratio of the bulk surface energy density to the bulk shear modulus of the indented material. When the contact radius is comparable with the intrinsic length, surface effect is much obvious, leading to a serious deviation between the two solutions predicted respectively by the theoretical model developed for nanomaterials and the classical contact model. A more interesting phenomenon is about surface effect on the indentation hardness, which is found to increase with the reduction of the indenter radius when the external load is fixed, or to increase with the decrease of the external load when the indenter radius keeps unchanged. All the results in this paper should be helpful not only for deep understanding of the surface effect on nano-contact behaviors but also for further revealing the nature of surface effect of nano-indentation hardness.

Contact Unloading Behaviors of Elastic-Power-Law Strain Hardening Material Considering Indenter Elasticity Effect

Unloading Model of Elastic–Plastic Half-Space Contacted by an Elastic Spherical Indenter

An Indentation Fatigue Depth Propagation Law

Elastic Contact Versus Indentation Modeling of Multilayered Materials

A Reverse Numerical Approach to Determine Elastic-plastic Properties of Multi-layer Material Systems with Flat Cylindrical Indenters

Spherical Elastic–Plastic Contact Model for Power-Law Hardening Materials under Combined Normal and Tangential Loads

Influence of Friction in Material Characterization in Microindentation Measurement.

Partial Slip Contact Problem Between a Transversely Isotropic Half-Space of Multi-Ferroic Composite Medium and a Spherical Indenter

Unloading behavior of low velocity impact between elastic and elastic–plastic bodies

Material characterization based on dual indenters

Study of the Ratcheting by the Indentation Fatigue Method with a Flat Cylindrical Indenter: Part I. Experimental Study

Influence of Friction on Imperfect Conical Indentation for Elastoplastic Material

Finite Element Analysis of the Creep Damage Indentation Testing with Flat Indenter

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

The Effect of Friction on Indentation Test Results

Influence of Equi-Biaxial Residual Stress on Spherical Indentation of Strain Hardening Materials

Contact Law and Coefficient of Restitution in Elastoplastic Spheres

Surface Effect in Axisymmetric Hertzian Contact Problems

The Relationship Between Plastic Zone and Contact Radius During Indentation Experiment for Strain-Hardened Materials

An elastic-plastic indentation model for different geometric indenters and its applications

Simulation of instrumented indentation and material characterization