Abstract:The use of the simple Hertz model for the analysis of Atomic Force Microscopy (AFM) force-distance curves measured on soft spherical cell-like particles leads to significant underestimations of the objects Young's modulus E. To correct this error, a mixed double contact model (based on the simple Hertz model and the Johnson-Kendall-Roberts (JKR) model) was derived. The model considers two independent particle deformation sites: (i) the upper part of the particle is deformed by the AFM indenter, (ii) the bottom part is deformed by the substrate, which is usually unnoticed. It becomes apparent that for soft particles even small forces between substrate and particle can influence the resulting force-distance curves. For instance we show, that a gravity-induced compression on the particle bottom side can have significant influence on the measurements. To highlight these observations, the deviation of the particle Young's modulus E between the simple Hertz model and our model is calculated. This error strongly depends on the ratio of the three involved radii: (i) the radius of the AFM indenter, (ii) the radius of the particle and (iii) the radius of the substrate as well as on the acting gravity force. Overall, the analysis suggests that for nanoscopic indenters the deviation is negligible, whereas the use of microscopic indenters results in significant errors that can be corrected via the presented model. This is important especially for very soft particles, since larger indenters can achieve higher signal to noise ratios. Furthermore, the applicability of the model was confirmed by indentation experiments on hydrogel microbeads. The mixed double contact model is applicable to a large range of indenter geometries and can be adapted for other contact models.

A modified Hertz model for finite spherical indentation inspired by numerical simulations

Multiscale Simulation Of Wedge Nanoindentation Based On The Repulsive Force-Field Approach

Spherical Indentation Method for Determining the Constitutive Parameters of Hyperelastic Soft Materials

Validation of contact mechanics models for Atomic Force Microscopy via Finite Elements Analysis

Unloading Model of Elastic–Plastic Half-Space Contacted by an Elastic Spherical Indenter

An Approximate Solution of the Spherical Indentation on a Generally Anisotropic Elastic Half-Space

An elastic-plastic indentation model for different geometric indenters and its applications

An Experimental Study on the Contact Problem of Spherical Indentation on the Anisotropic Elastic Half-Space Based on Imaging

A novel oblique impact model for elastic solids

Semi-analytical model for predicting mechanical properties of metals using flat truncated cone indenter and its application

A novel contact model for AFM indentation experiments on soft spherical cell-like particles.

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Experimental and modeling studies on contact mechanics of silicone rubbers

Semi-analytical model for flat indentation of metal materials and its applications

Identification of plastic properties through spherical indentation

Square indentation on a soft elastomer layer with finite thickness

Spherical indentation on biological films with surface energy

Approximate contact force model for viscoelastic materials based on generalized Maxwell model

Analysis on Elastic–plastic Spherical Contact and Its Deformation Regimes, the One Parameter Regime and Two Parameter Regime, by Finite Element Simulation

Measuring elastic parameters of transversely isotropic materials by cylindrical indentation

Indentation Responses of Piezoelectric Layered Half-Space