Abstract:To increase the residual stress stability of Au films while reducing the residual stress level, the effect of deposition temperature on long-term residual stress evolution of Au films under different conditions were studied. Au films with a thickness of 360 nm were deposited using e-beam evaporation on fused silica under different temperatures. Observations and comparisons were made of the microstructures of Au films deposited under different temperatures. Results showed that by increasing the deposition temperature, a more compact microstructure of Au film was obtained, which was manifested in increased grain size and reduced grain-boundary voids. After deposition, a combined process consisting of natural placement and 80 °C thermal holding was conducted on the Au films, and the residual stresses were monitored using the curvature-based technique. Results showed that the initial tensile residual stress of the as-deposited film decreased with the deposition temperature. The Au films with higher deposition temperatures showed better residual stress stability, maintaining low stress levels in the subsequent long-term combination of natural placement and thermal holding. The mechanism was discussed based on the differences in microstructure. Comparisons were made between post-deposition annealing and increased deposition temperature.

Effect of Pulsed Laser Irradiation on Microstructure and Evolution of Residual Stress for Gold Film

Effect of Post Deposition Annealing on Residual Stress Stability of Gold Films

Residual Stress Evolution During Long-Term and Cyclic Aging and Annealing of Gold Films Deposited by Electron Beam Evaporation

Electron Relaxation Effect on the Sub-100-fs Laser Interaction with Gold Thin Film.

Laser Induced Transient Structures in a 150 nm Gold Crystal

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

Experimental and Numerical Studies on Micro-Bumps Without Melting of Gold Films with Different Thicknesses Induced by Ultrafast Laser

Study on Deformations of Gold Film Induced by Ultrafast Laser at GHz Burst Mode

The Radiation Effect of Ion Species on the Microstructure of Nanoporous Gold

Bump Deformation of Gold Film Induced by Ultrafast Laser

Ultrafast Laser-Induced Premelting and Structural Transformation of Gold Nanorod

Atomic-Level Study of A Thickness-Dependent Phase Change in Gold Thin Films Heated by an Ultrafast Laser

Effect of Current Density on the Deposit Stress in Gold Electroplating

Structural Transition Dynamics of the Formation of Warm Dense Gold: from an Atomic Scale View

Effect of Deposition Temperature on Long-Term Residual Stress Evolution of Au Films

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Femtosecond laser ablation on gold-chromium film

Molecular Dynamics Study of the Tensile Properties of Gold Nanocrystalline Films Irradiated by Gallium Ions

Effect of residual stress on laser-induced damage characterization of mitigated damage sites in fused silica

Ultrafast Dynamics of Laser Thermal Excitation in Gold Film Triggered by Temporally Shaped Double Pulses

Microstructure, mechanical properties and tribological behaviors of gold coating determined by surface quality