Abstract:In this study, a continuum damage mechanics (CDM) finite element (FE) model was developed to investigate the effects of surface roughness on rolling contact fatigue (RCF) life of non-conformal contacts. In order to assess the surface roughness of tribo-components, twelve deep groove rolling element bearings from various companies in different sizes were procured and measured using an optical surface profilometer. The roughness average (Ra) and the root mean square of surface roughness (RMS, σ) ranged from a low of 0.03, 0.05 µm to a high of 0.14, 0.20 µm, respectively. The number of peaks and valleys per 400 µm were measured and calculated. The number of peaks ranged from 11 to 31 (>99.5% Confidence Interval). The measured surfaces also revealed that a sinusoidal pattern can be used to accurately represent the surface patterns. The sinusoidal surface pattern was used to determine the elastohydrodynamic lubrication (EHL) pressure distribution between an equivalent rough surface in contact with a smooth surface. Four roughness amplitude were used to generate specific film thicknesses (λ-ratios) resulting in full to mixed EHL lubrication regimes. The EHL pressure distributions were replaced with representative symmetric Hertzian pressure distributions in order to remove the effect of asymmetry of an EHL pressure distribution. The resulting symmetric pressure distributions were used in a finite element continuum damage mechanics model to determine RCF life of machine elements operating in specific film thickness range of 1 < λ < 10. The RCF results from the FE model indicate that as roughness amplitude increases or lambda ratio decreases, the fatigue lives decrease for the various frequencies. Additionally, subsurface failure fatigue lives are reduced as roughness frequency increases regardless of amplitude or Hertzian pressure. The RCF results also indicate that for the low frequency pressure distribution the contact is most susceptible to surface failure, whereas for high frequency pressure distribution the contact resists surface failure. The results from this investigation were used to develop surface roughness effects for various RCF life equations commonly used in rolling element bearing application.

Research on Rolling Contact Fatigue Failure of the Bearing Used in High-Speed Electric Multiple Units’ Axle Box Based on a Damage-Coupled Elastic–Plastic Constitutive Model

Study on predicting rolling contact fatigue of pitch bearing raceway in offshore wind turbine

Time-variant reliability analysis of angular contact ball bearing considering the coupled effect of rolling contact fatigue damage and wear

A rolling contact fatigue health prediction model based on load interaction and damage energy accumulation

A peridynamic damage-cumulative model for rolling contact fatigue

Life Prediction Method for EMU Axle Box Bearings Based on Actual Measured Loadings

The effect of friction on surface crack initiation in rolling contact fatigue considering damage accumulation

Experimental characterization and numerical modeling on the external impacting of high-speed railway axle EA4T steel

A modified nonlinear fatigue damage accumulation model for life prediction of rolling bearing under variable loading conditions

Research on Size Effects in Fracture Properties and Residual Life Prediction for High-Speed Train Axles

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

A crystal plasticity framework for modelling the rolling contact fatigue of planetary roller screw mechanism

Study on Fatigue Performance of Three-Roll Skew Rolling Hollow Axle

Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model

An investigation into Belgrospi-like damage formation on a sharp curved track using finite element method

A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue

On High Cycle Fatigue Characteristic of Locomotive Wheels

A life prediction model for rolling contact fatigue based on the improved moment of load path method

Research on the damage mechanism of the rolling contact fatigue of a wheel–rail contact system under the influences of surface defects