Flame Acceleration and DDT in a Channel with Continuous Triangular Obstacles: Effect of Blockage Ratio

Xiaoxi Li,Jizhou Dong,Kaiqiang Jin,Qiangling Duan,Jinhua Sun,Huahua Xiao
DOI: https://doi.org/10.1080/00102202.2022.2120767
IF: 1.9
2024-01-01
Combustion Science and Technology
Abstract:Experiments were conducted in a stoichiometric hydrogen-oxygen mixture at initial pressure of 1 atm to study the flame acceleration and deflagration-to-detonation transition (DDT) in a 20 mm high channel equipped with continuous triangular obstacles. Effect of blockage ratio (br) was explored by considering different obstacle heights of 0, 1 mm, 3 mm, 5 mm, and 7 mm, corresponding to br= 0, 0.1, 0.3, 0.5, and 0.7, respectively. High-speed schlieren photography and OH* chemiluminescence recording were used to visualize the processes. Results show that blockage ratio has a significant effect on the scales and velocities of the vortices generated in the gaps between neighboring obstacles and consequently on the subsequent flame-vortex interactions. Higher br leads to faster flame acceleration via stronger flame-vortex interactions. The intricate shock-flame interactions cause successive local explosions in the br = 0.3, 0.5, and 0.7 cases, creating conditions for DDT. An eventual choking regime occurs in the br = 0.7 case due to energy losses by continuous diffractions at the obstacle vertices. It was found that the onset of DDT is triggered when the critical height of the unobstructed passage is approximately greater than three detonation cell sizes. The mechanism of DDT changes as the br decreases. One important feature observed is that the br = 0.1 case has the shortest DDT distance. In addition, the final flame speed (similar to 740 m/s, 1.4 times unburned sound speed) before DDT for br = 0.1 is significantly smaller than those (similar to 1300 m/s, 2.4 times unburned sound speed) for br >= 0.3. The reason is that the low obstacles retain the characteristics of the obstacle, while mimicking the wall roughness, resulting in both shock compression of unburned gas and viscous heating in the boundary layer ahead of the flame front. The combined effects promote the occurrence of DDT for the case with br = 0.1.
What problem does this paper attempt to address?