Abstract:Understanding flame acceleration (FA) and deflagration-to-detonation transition (DDT) is important for combustion applications. However, DDT is a high-speed, nonlinear and complex process and the exact underlying mechanisms remain unclear, especially for narrow channels with a width smaller than detonation cell size. In this paper, numerical simulations were carried out to study the FA and DDT in a stoichiometric hydrogen-air mixture in narrow channels with width on the order of magnitude comparable to laminar flame thickness. The fully-compressible reactive Navier-Stokes equations were solved by using a high-order numerical method. Hydrogen-air combustion was taken into account using a calibrated simplified chemical-diffusion model. Four different channel widths, i.e., d = 2.0 mm (similar to 6 delta(1)), 1.0 mm (similar to 3 delta(1)), 0.5 mm (similar to 1.5 delta(1)), 0.25 mm (similar to 0.7 delta(1)), were considered in the simulations to explore the size effect, where delta(1) is the laminar flame thickness. The results show that the FA is mainly determined by boundary layer effects for all the channels considered. In the early stages, the flame keeps accelerating due to the stretching effect of boundary layer that leads to a significant increase in flame surface area. In the later stages of acceleration, an ultra-fast flame develops in the boundary layer ahead of the flame front due to the viscous heating effect associated with wall friction. It was found that the DDT mechanism is essentially consistent in all the channels. Detonation arises from the contact of two neighboring flame fronts in the shocked region that is vulnerable to a mild temperature gradient or fluctuation. The contact of the two high-temperature reaction fronts instantly causes a very high concentration of heat flux and consequently a detonation wave emerges from the contact spot. The detonation propagation after DDT, however, depends on the channel width. When d >= 1.5 delta(1), a quasi-steady or a single-head detonation forms and sustains until the end of the combustion. For the case of d < 1.5 delta(1), the detonation decays into a high-speed flame. When the channel width is sufficiently small, e.g., d similar to 0.7 delta(1), detonation initiation can occur occasionally, but soon decouples into a shock and a flame. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Flame Acceleration and Deflagration-to-detonation Transition in Micro- and Macro-Channels: an Integrated Mechanistic Study

Flame Acceleration and Deflagration-to-detonation Transition in Narrow Channels Filled with Stoichiometric Hydrogen-Air Mixture

Flame acceleration and transition to detonation in a channel with triangular obstacles

Flame Acceleration and Defagration-to-Detonation Transition through an Array of Obstacles

Flame acceleration and deflagration to detonation transition in micro and macro scale channels

Effects of heat loss at walls on flame acceleration and deflagration to detonat ion transition

On the Stabilization Mechanism of High-Speed Deflagrations in Narrow Channels with Heat Loss

Flame Acceleration and Transition to Detonation in a Pre-/Main-chamber Combustion System

Surface Heat Loss and Chemical Kinetic Response in Deflagration-to-detonation Transition in Microchannels

Enhanced DDT mechanism from shock-flame interactions in thin channels

Deflagration-to-detonation transition and detonation propagation characteristics in a millimetre-scale spiral channel

Experimental and Numerical Study of Flame Acceleration and DDT in a Channel with Continuous Obstacles

Flame acceleration and deflagration-to-detonation transition in a channel with continuous triangular obstacles: Effect of equivalence ratio

Fast flame acceleration and deflagration to detonation transition in smooth and obstructed tubes, channels and slits

Preheating within the flame fold and hydraulic resistance as mechanisms of Deflagration-to-Detonation Transition

Gas Compression Moderates Flame Acceleration in Deflagration-to-detonation Transition

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Flame acceleration in channels with obstacles in the deflagration-to-detonation transition

Effect of Wall Roughness on Flame Acceleration and Deflagration-to-detonation Transition in a Narrow Channel

A numerical study of the rapid deflagration-to-detonation transition

Different Stages of Flame Acceleration from Slow Burning to Chapman-Jouguet Deflagration.