Preheating within the flame fold and hydraulic resistance as mechanisms of Deflagration-to-Detonation Transition

Michael Liberman,Leonid Kagan,Gregory Sivashinsky,Damir Valiev

2007-01-01

Abstract:Although significant insights have been obtained through many experimental as well as theoretical and numerical studies, a comprehensive first-principle understanding of the phenomenon is still far from complete. As has recently been realized [1], the hydraulic resistance alone is capable of triggering the transition even if the multi-dimensional effects, such as the flame acceleration due to folding, are completely suppressed and the system is regarded as effectively one-dimensional with the confinement being accounted for through the velocity-dependent drag-force term added to the momentum equation. The basic predictions of the onedimensional model were recently corroborated in direct numerical simulations of premixed gas combustion in thin channels, where the hydraulic resistance is incorporated through the no-slip boundary condition [2,3]. Deflagration-to-detonation transition in unconfined systems is more problematic. In this case the transition is commonly attributed to the flame acceleration induced by spontaneous flame wrinkling due to the DarrieusLandau (DL) instability. Yet, the acceleration resulting from the wrinkling seems to be rather a weak effect, whose ability to cause the transition is not at all obvious. One of the purposes of the present work is to gain a better insight into this question. As is well known, in wide channels the DL instability results in the formation of wrinkled flames and the flame speed enhancement due to the increase of the flame area. The wrinkled flame generates a shock with a Mach number of about 1.2 – 1.5, which is too low to trigger detonation. Yet, as shown below, there is another previously overlooked aspect of the DL instability. The folded reaction zone creates a preheating of the fresh mixture trapped within the fold interior. This, under favorable conditions, may invoke autoignition triggering the transition. The formation of a suitable for DDT fold in the flame brush would require high compressibility and accordingly high speed of a laminar flame. The effect is found to be sensitive to the flame’s normal speed and the reaction rate pressure-dependency, favoring fast flames and high-order reactions. Apart from discussing the impact of the DL instability on the transition, the present paper reports new results on the influence of adhesive and rough walls.