Abstract:In the present study, flame acceleration driven by an array of multiple ignition kernels, equally spaced in the axial direction of a channel closed at one end, is studied numerically. In order to demonstrate the effects of the proposed ignition configuration on the flow dynamics, free-slip wall boundary condition is adopted. It is demonstrated that the burning of multiple flame kernels generates a powerful upstream flow, propelling the flame kernels, with the leading kernel’s tip undergoing a strong exponential acceleration. In a channel with smooth walls, such a powerful acceleration process is limited in time. The present study is mainly focused on the dynamics of the flame during the exponential stage of acceleration. The dependence of the acceleration rate, total acceleration time, and the maximum flame velocity on the initial distance between the kernels, the number of ignition kernels, and the thermal gas expansion coefficient, is quantified. Remarkably, the initial distance between the kernels has a weak influence on the above mentioned characteristics of flame dynamics as long as it is sufficiently large. It is observed that the acceleration rate increases with the kernel number. Notably, a significantly large maximum flame tip velocity can be achieved using the multi-kernel configuration as compared to the single-point ignition scenario. The acceleration rate demonstrates a nearly linear dependence on the thermal expansion coefficient, thus, the increase in thermal expansion results in a considerably stronger flame acceleration process.Novelty and Significance StatementFor the first time, the flame acceleration process upon simultaneous ignition of a multi-point array of hot kernels equally spaced at the centerline of a channel was systematically studied. The work emphasizes the potential for achieving an extremely high flame speed within a very short time as compared to the single-ignition method. The acceleration rate, total acceleration time, and maximum achievable flame velocity were quantified. In a multi-point ignition scenario, we demonstrate that the burning of the fresh mixture between the kernels increases an overall cumulative gas expansion, propelling the leading tip. This result suggests a method for creating a powerful flame acceleration, which is an essential step in deflagration-to-detonation transition. Notably, the powerful acceleration is achieved in channels with smooth walls, which is important for DDT applications, in which using obstructed channels may be associated with a range of operational problems. The simplicity of the setup is also emphasized.

Critical Role of Blockage Ratio for Flame Acceleration in Channels with Tightly Spaced Obstacles

Influence of Gas Compression on Flame Acceleration in Channels with Obstacles

Flame acceleration in channels with obstacles in the deflagration-to-detonation transition

Effect of surface friction on ultrafast flame acceleration in obstructed cylindrical pipes

Various regimes of premixed flame propagation in obstructed channels with both extremes open

Physical Mechanism of Ultrafast Flame Acceleration.

Premixed Flame Oscillations in Obstructed Channels with Both Ends Open

Effect of Surface Conditions on Fast Flame Acceleration in Obstructed Cylindrical Pipes

Dynamics of Flame Extinction in Narrow Channels with Cold Walls: Heat Loss Vs Acceleration

Moderation of Flame Acceleration in Obstructed Cylindrical Pipes Due to Gas Compression

Effects of obstacle layout and blockage ratio on flame acceleration and DDT in hydrogen-air mixture in a channel with an array of obstacles

Impacts of Wall Conditions on Flame Acceleration at the Early Stages of Burning in Channels

Quasi-steady stages in the process of premixed flame acceleration in narrow channels

Flame kinetic behavior of premixed hydrogen-air explosion in an obstructed channel

Nonequidiffusive premixed-flame propagation in obstructed channels with open, nonreflecting ends

Analysis of flame acceleration induced by wall friction in open tubes

Multiple-point Ignition As a Driver of Flame Acceleration at the Early Stage of Burning in Channels

Effect of thermal expansion on flame propagation in channels with nonslip walls

Study on inhomogeneous hydrogen–air mixture flame acceleration and deflagration-to-detonation transition

Analysis of nonequidiffusive premixed flames in obstructed channels

Study on the dynamic process of in-duct hydrogen-air explosion flame propagation under different blocking rates