Abstract:The effect of nonspherical (i.e. cylindrical) bomb geometry on the evolution Of Outwardly propagating flames and the determination of laminar flame speeds using the conventional constant-pressure technique is investigated experimentally and theoretically. The cylindrical chamber boundary modifies the propagation rate through the interaction of the wall with the flow induced by thermal expansion across the flame (even with constant pressure), which leads to significant distortion of the flame surface for large flame radii. These departures from the unconfined case, especially the resulting nonzero burned gas velocities, can lead to significant errors in flame speeds calculated using the conventional assumptions, especially for large flame radii. For example, at a flame radius of 0.5 times the wall radius, the flame speed Calculated neglecting confinement: effects can be low by similar to 15% (even with constant pressure). A methodology to estimate the effect of nonzero burned gas velocities on the measured flame speed in cylindrical chambers is presented. Modeling and experiments indicate that the effect of confinement can be neglected for flame radii less than 0.3 times the wall radius while still achieving acceptable accuracy (within 3%). The methodology is applied to correct the flame speed for nonzero burned gas speeds, in order to extend the range of flame radii useful for flame speed measurements. Under the proposed scaling, the burned gas speed can be well approximated as a function of only flame radius for a given chamber geometry - i.e. the correction function need only be determined once for an apparatus and then it can be used for any mixture. Results indicate that the flow correction can be used to extract flame speeds for flame radii tip to 0.5 times the wall radius with somewhat larger, yet still acceptable uncertainties for the cases Studied. Flow-corrected burning velocities are measured for hydrogen and syngas mixtures at atmospheric and elevated pressures. Flow-corrected flame speeds in the small cylindrical chamber used here agree well with previously reported flame speeds from large spherical chambers. Previous papers presenting burning velocities from cylindrical chambers report performing data analysis on flame radii less than 0.5 or 0.6 times the wall radius, where the flame speed calculated neglecting confinement effects may be low by similar to 15 or 20%, respectively. For cylindrical chambers, data analysis should be restricted to flame radii less than 0.3 times the wall radius or a flow correction should be employed to account for the burned gas motions. With regard to the design of future vessels, larger vessels that minimize the flow aberrations for the same flame radius are preferred. Larger vessels maximize the relatively unaffected region of data allowing for a more straightforward approach to interpret the experimental data. (c) 2009 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Moderation of Flame Acceleration in Obstructed Cylindrical Pipes Due to Gas Compression

Influence of Gas Compression on Flame Acceleration in Channels with Obstacles

Effect of Surface Conditions on Fast Flame Acceleration in Obstructed Cylindrical Pipes

Effect of surface friction on ultrafast flame acceleration in obstructed cylindrical pipes

Role Of Compressibility In Moderating Flame Acceleration In Tubes

Gas Compression Moderates Flame Acceleration in Deflagration-to-detonation Transition

Influence of gas compression on flame acceleration in the early stage of burning in tubes

Flame acceleration in channels with obstacles in the deflagration-to-detonation transition

Analysis of flame acceleration induced by wall friction in open tubes

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Critical Role of Blockage Ratio for Flame Acceleration in Channels with Tightly Spaced Obstacles

Various regimes of premixed flame propagation in obstructed channels with both extremes open

Different Stages of Flame Acceleration from Slow Burning to Chapman-Jouguet Deflagration.

Effect of Cylindrical Confinement on the Determination of Laminar Flame Speeds Using Outwardly Propagating Flames

Physical Mechanism of Ultrafast Flame Acceleration.

Quasi-steady stages in the process of premixed flame acceleration in narrow channels

Impacts of Wall Conditions on Flame Acceleration at the Early Stages of Burning in Channels

Effect of thermal expansion on flame propagation in channels with nonslip walls

Premixed Flame Propagation in a Confining Vessel with Weak Pressure Rise

Fast flame acceleration and deflagration to detonation transition in smooth and obstructed tubes, channels and slits

Dynamics of Flame Extinction in Narrow Channels with Cold Walls: Heat Loss Vs Acceleration