Abstract:Understanding flame acceleration (FA) and deflagration-to-detonation transition (DDT) is important for combustion applications. However, DDT is a high-speed, nonlinear and complex process and the exact underlying mechanisms remain unclear, especially for narrow channels with a width smaller than detonation cell size. In this paper, numerical simulations were carried out to study the FA and DDT in a stoichiometric hydrogen-air mixture in narrow channels with width on the order of magnitude comparable to laminar flame thickness. The fully-compressible reactive Navier-Stokes equations were solved by using a high-order numerical method. Hydrogen-air combustion was taken into account using a calibrated simplified chemical-diffusion model. Four different channel widths, i.e., d = 2.0 mm (similar to 6 delta(1)), 1.0 mm (similar to 3 delta(1)), 0.5 mm (similar to 1.5 delta(1)), 0.25 mm (similar to 0.7 delta(1)), were considered in the simulations to explore the size effect, where delta(1) is the laminar flame thickness. The results show that the FA is mainly determined by boundary layer effects for all the channels considered. In the early stages, the flame keeps accelerating due to the stretching effect of boundary layer that leads to a significant increase in flame surface area. In the later stages of acceleration, an ultra-fast flame develops in the boundary layer ahead of the flame front due to the viscous heating effect associated with wall friction. It was found that the DDT mechanism is essentially consistent in all the channels. Detonation arises from the contact of two neighboring flame fronts in the shocked region that is vulnerable to a mild temperature gradient or fluctuation. The contact of the two high-temperature reaction fronts instantly causes a very high concentration of heat flux and consequently a detonation wave emerges from the contact spot. The detonation propagation after DDT, however, depends on the channel width. When d >= 1.5 delta(1), a quasi-steady or a single-head detonation forms and sustains until the end of the combustion. For the case of d < 1.5 delta(1), the detonation decays into a high-speed flame. When the channel width is sufficiently small, e.g., d similar to 0.7 delta(1), detonation initiation can occur occasionally, but soon decouples into a shock and a flame. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Flame Acceleration and Defagration-to-Detonation Transition through an Array of Obstacles

Flame acceleration and transition to detonation in a channel with triangular obstacles

Flame Acceleration and Deflagration-to-detonation Transition in Hydrogen-Air Mixture in a Channel with an Array of Obstacles of Different Shapes

Experimental and Numerical Study of Flame Acceleration and DDT in a Channel with Continuous Obstacles

Flame acceleration and deflagration-to-detonation transition in a channel with continuous triangular obstacles: Effect of equivalence ratio

Flame Acceleration and DDT in a Channel with Fence-Type Obstacles: Effect of Obstacle Shape and Arrangement

Flame Acceleration and Deflagration-to-detonation Transition in Micro- and Macro-Channels: an Integrated Mechanistic Study

Flame Acceleration and DDT in a Channel with Continuous Triangular Obstacles: Effect of Blockage Ratio

Flame acceleration in channels with obstacles in the deflagration-to-detonation transition

Effects of obstacle layout and blockage ratio on flame acceleration and DDT in hydrogen-air mixture in a channel with an array of obstacles

Flame Acceleration and Deflagration-to-detonation Transition in Narrow Channels Filled with Stoichiometric Hydrogen-Air Mixture

Fast flame acceleration and deflagration to detonation transition in smooth and obstructed tubes, channels and slits

An efficient approach to achieve flame acceleration and transition to detonation

Enhanced DDT mechanism from shock-flame interactions in thin channels

Study on inhomogeneous hydrogen–air mixture flame acceleration and deflagration-to-detonation transition

Flame Acceleration and Transition to Detonation in Non-Uniform Hydrogen-Air Mixtures in an Obstructed Channel with Different Obstacle Arrangements

Influence of Longitudinal Obstacle Spacing on the Deflagration-to-detonation Transition Through a Bank of Obstacles in a Hydrogen-Air Mixture

Mechanism of flame acceleration and detonation transition from the interaction of a supersonic turbulent flame with an obstruction

Flame Acceleration and Transition to Detonation in a Pre-/Main-chamber Combustion System

Transition from Fast-Flame to Detonation

Deflagration-to-detonation transition and detonation propagation characteristics in a millimetre-scale spiral channel